To solve the problem of pixel light intensity information distortion caused by camera vignetting in optical devices such as CMOS or CCD cameras, existing studies mainly focus on small spatial light fields and point light sources and adopt an integrating sphere and function model for vignetting correction, but it is not suitable for large LED optical composite display devices. Under this background, this paper innovatively proposes a camera vigneting compensation method based on an LED spatial array, independently develops a two-dimensional translation device driven by a high-precision guide rail, uses spatial array technology to obtain the brightness distribution of the corrected display screen to quantify its camera vigneting distortion characteristics, and adopts systematic mathematical operations and iterative compensation strategies. Industry standard tests show that the brightness uniformity of the display has been improved by 5.06%. The above research results have been applied to mass production and industrialization.
In order to classify light-emitting diode (LED) display units with a specific luminous direction and improve the uniformity of the display screen, this paper proposes a classification method for the basic component of the LED display, i.e., the display module. According to the relationship between the light intensity distribution and the viewing angle of the packaged LED, the brightness inflection point was used as the fixed position of the two side array cameras, and the shooting was carried out from the normal direction of the display module and from the viewing angle directions of the left and right sides, respectively. The established classification model of the relative deviation between classes was used to evaluate the luminous consistency of the display module. The LED display module was directly classified according to the side viewing angle. The experiment considered the matching with human vision and controlled the number of product types. The results show that the brightness uniformity of the display module selected by this method increased by 3.31%, which basically ensures that the yield is not reduced due to the inconsistency of the side viewing angle, and this improvement can be judged in advance without building a screen, which not only saves time but also reduces manpower. This method has been stably and feasibly applied to engineering practice and can be classified according to customers’ requirements for LED display perspective.