Sejin Kwon

Prof. Dr. Sejin Kwon


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 April 2007 in Lab on a Chip
Verified
Journal Article
Closed access
PDF file
TKTaegyu Kim
Taegyu Kim
JHJin Soo Hwang
Jin Soo Hwang
SKSejin Kwon
Sejin Kwon
This paper presents the design, fabrication and evaluation of a micro methanol reformer complete with a heat source. The micro system consists of the steam reforming reactor of methanol, the catalytic decomposition reactor of hydrogen peroxide, and a heat exchanger between the two reactors. In the present study, catalytic decomposition of hydrogen peroxide is used as a process to supply heat to the reforming reactor. The decomposition process of hydrogen peroxide produces water vapor and oxygen as a product that can be used efficiently to operate the reformer/PEMFC system. Cu/ZnO was selected as a catalyst for methanol steam reforming and Pt for the decomposition of hydrogen peroxide. Incipient wetness method was used to load catalysts on a porous support. Catalyst loaded supports were inserted in the cavity made on the glass wafer. The performance of the methanol steam reforming system was measured at various test conditions and the optimum operation condition was sought. At the optimum condition, the hydrogen selectivity was 86.4% and the thermal efficiency was 44.8%. The product gas included 74.1% H2, 24.5% CO2 and 1.4% CO and the total volume production rate was 23.5 ml min−1. This amount of hydrogen can produce 1.5 W of power on a typical PEMFC.

9 May 2016 in International Journal of Green Energy
Verified
Journal Article
Closed access
BGByeong Gyu Gang
Byeong Gyu Gang
SKSejin Kwon
Sejin Kwon
Constant hydrogen generation via a hydrogen generator is evaluated from the methanolysis of sodium borohydride (NaBH4) using Co/Al2O3 and MnOx/Al2O3 catalysts. Chemical borohydrides coupled with catalysts can be used for compact storage and to create efficient generation systems. Thus, we first report the catalytic activity of MnOx/Al2O3, which is synthesized using the simple wet-impregnation method, for the methanolysis reaction. The results indicate that both catalysts can effectively accelerate the methanolysis reaction and provide constant hydrogen generation rates. Thus, we integrate this hydrogen generation system into a proton exchange membrane fuel cell stack (PEMFC) to determine whether it can be used as a portable power supply. As a result, this fuel cell system operates at 40 W for 1 hr using the hydrogen source supplied from the catalytic methanolysis reaction.

15 September 2012 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
TOTaek Hyun Oh
Taek Hyun Oh
SKSejin Kwon
Sejin Kwon

14 May 2006 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
SKSehoon Kim
Sehoon Kim
SKSejin Kwon
Sejin Kwon
The effects of four geometric parameters of an annular injection supersonic ejector, namely, the primary nozzle exit-to-throat area ratio, the contraction angle of the mixing chamber, the cross-sectional area and L/D ratio of the second-throat on the performance parameters including the secondary flow pressure, the starting pressure and unstarting pressure were investigated experimentally. The starting pressure exhibits linearly proportional dependence on the throat area ratio when the mixing chamber length is less than a certain critical value. For a longer mixing chamber, the starting pressure is proportional to the mixing chamber length while the unstarting pressure depends on the throat area ratio only. The geometric parameters of the second-throat do not affect the static pressure of the secondary flow. This implies that the secondary flow is aerodynamically choked in the mixing chamber and the static pressure of the secondary flow is determined by the choking condition since the mixing chamber of the annular injection ejector is relatively long. Based on the findings by the experiment, a simplified analytical model was proposed to predict the secondary flow pressure. The predicted secondary flow pressure agrees reasonably well with the measurement for a small contraction angle of the mixing chamber.

29 August 2022 in International Journal of Aeronautical and Space Sciences
Verified
Journal Article
Closed access
PDF file
SCSeunghyuk Choi
Seunghyuk Choi
SKSejin Kwon
Sejin Kwon
SLSi-Eun Lee
Si-Eun Lee
MMMi-Ae Moon
Mi-Ae Moon

1 March 2021 in Aerospace Science and Technology
Verified
Journal Article
Closed access
YYYongtae Yun
Yongtae Yun
Jeongmoo HuhJeongmoo Huh
Jeongmoo Huh
SKSejin Kwon
Sejin Kwon