This work proposes a control strategy to solve the path tracking problem of a suspended load carried by a tilt-rotor unmanned aerial vehicle (UAV). Initially, the equations of motion for the multibody mechanical system are derived from the load’s perspective by means of the Euler-Lagrange formulation, in which the load’s position and orientation are chosen as degrees of freedom. An unscented Kalman filter (UKF) is designed for nonlinear state estimation of all the system states, assuming that available information is provided by noisy sensors with different sampling rates that do not directly measure the load’s attitude. Furthermore, a model predictive control (MPC) strategy is proposed for path tracking of the suspended load with stabilization of the tilt-rotor UAV when parametric uncertainties and external disturbances affect the load, the rope’s length and total system mass vary during taking-off and landing, and the desired yaw angle changes throughout the trajectory. Finally, numerical experiments are presented to corroborate the good performance of the proposed strategy.
28 July 2023 in Journal of Control, Automation and Electrical Systems
This work presents the modeling and control of a tilt-rotor UAV with tail controlled surfaces for path tracking with improved forward flight performance. A nonlinear dynamic model is obtained through Euler-Lagrange formulation and linearized around a reference trajectory in order to obtain a linear parameter-varying model. The forward velocity is treated as an uncertain parameter, and the linearized system is represented as a set of polytopes with nonempty intersection regarding the forward velocity. Feedback gains are computed for each of the vertices of the polytopes using a discrete mixed H 2 /H ∞ control approach with pole placement constraints strategy. The resultant feedback gain, which is able to control the system inside a given polytope, is obtained using an adaptive law through an optimal convex combination of the vertices' gains. Finally, an adaptive mixing scheme is used to smoothly schedule the feedback gains between the polytopes.