Communication 'blackout' is a big challenge for modern space engineering. In the recent decade, the terahertz (THz) technology is believed to be an effective solution for the 'blackout' problem. Many research works about the transmission of THz waves in plasma slabs have been carried out. According to those works, the radio attenuation of THz waves in plasma slabs strongly depends on thickness of the slab, electron density, electron collision frequency and temperature. However, few previous works have paid attention to realistic reentry plasma sheath. In the present paper, a hypersonic fluid model is introduced in order to investigate the structure of the realistic plasma sheath which covers a blunt coned vehicle. The scattering matrix method is employed to study the transmission of THz waves in realistic plasma sheath. According to the present study, the wave frequency, electron density and collision frequency are the most significant factors which determine the attenuation of the THz waves in the plasma sheath. Since the whole plasma sheath is inhomogeneous, to install the antenna at an appropriate position helps mitigate the 'blackout'. For the blunt coned reentry vehicle, installing the antenna on the wall close to the bottom is helpful for mitigating the 'blackout' problem.
There have been many studies on the sub-terahertz (sub-THz) wave transmission in reentry plasma sheaths. However, only some of them have paid attention to the transmission of sub-THz waves in magnetized plasma sheaths. In this paper, the transmission of sub-THz waves in both unmagnetized and magnetized reentry plasma sheaths was investigated. The impacts of temporal evolution of the plasma sheath on the wave transmission were studied. The transmission of “atmospheric window” frequencies in a magnetized plasma sheath was discussed in detail. According to the study, the power transmission rates (Tp) for the left hand circular (LHC) and the right hand circular modes in the magnetized plasma sheath are obviously higher and lower than those in the unmagnetized plasma sheath, respectively. The Tp of LHC mode increases with both wave frequency and external magnetic field strength. Also, the Tp of LHC mode in both magnetized and unmagnetized plasma sheaths varies with time due to the temporal evolution of the plasma sheath. Moreover, the performance of sub-THz waves in magnetized plasma sheath hints at a new approach to the “blackout” problem. The new approach, which is in the capability of modern technology, is to utilize the communication system operating at 140 GHz with an onboard magnet installed near the antenna.
Mode-locked lasers with strong high order dispersion exhibit rich nonlinear dynamics. Here we numerically and experimentally demonstrate coexistence of dissipative soliton (DS) and stretched pulse (SP) in a dual-wavelength mode-locked Tm-doped fiber laser with strong third-order dispersion (TOD), where the DS and SP show completely different pulse duration and peak power. Wavelength-dependent feature of the net cavity group-velocity dispersion (GVD) leaded by the strong TOD plays a key role for the coexistence patterns. To our best knowledge, this is the first demonstration of the coexistence of different mode-locked pulse regimes with strong laser cavity TOD.
In this paper, we present a basic model of robust one-way electromagnetic modes at microwave frequencies, which is formed by a semi-infinite gyromagnetic yttrium–iron–garnet with dielectric cladding terminated by a metal plate. It is shown that this system supports not only one-way surface magnetoplasmons (SMPs) but also a one-way regular mode, which is guided by the mechanism of total internal reflection. Like one-way SMPs, the one-way regular mode can be immune to backscattering, and two types of one-way modes together make up a complete dispersion band for the system.
Based on the unique insulator-metal phase transition property of vanadium dioxide (VO2), we propose an integrated metasurface with a switchable mechanism between ultra-broadband absorption and polarization conversion, operating in the terahertz (THz) frequency range. The designed metasurface device is constructed using a stacked structure composed of VO2 quadruple rings, a dielectric layer, copper stripes, VO2 film, a dielectric layer, and a copper reflection layer. Our numerical simulations demonstrate that our proposed design, at high temperatures (above 358 K), exhibits an ultra-broadband absorption ranging from 4.95 to 18.39 THz, maintaining an absorptivity greater than 90%, and achieves a relative absorption bandwidth of up to 115%, significantly exceeding previous research records. At room temperature (298 K), leveraging VO2’s insulating state, our proposed structure transitions into an effective polarization converter, without any alteration to its geometry. It enables efficient conversion between orthogonal linear polarizations across 3.51 to 10.26 THz, with cross-polarized reflection exceeding 90% and a polarization conversion ratio over 97%. More importantly, its relative bandwidth reaches up to 98%. These features highlight its wide-angle, extensive bandwidth, and high-efficiency advantages for both switching functionalities. Such an ultra-broadband convertible design offers potential applications in optical switching, temperature dependent optical sensors, and other tunable THz devices in various fields.
Slowing down or even trapping electromagnetic (EM) waves attract researchers’ attention for its potential applications in energy storage, optical signal processing and nonlinearity enhancement. However, conventional trapping, in fact, is not truly trapping because of the existence of strong coupling effects and reflections. In this paper, a novel metal-semiconductor-semiconductor-metal (MSSM) heterostructure is presented, and novel truly rainbow trapping of terahertz waves is demonstrated based on a tapered MSSM structure. More importantly, functional devices such as optical buffer, optical switch and optical filter are achieved in one single structure based on the truly rainbow trapping theory. Owing to the property of one-way propagation, these new types of optical devices can be high performance and are expected to be used in integrated optical circuits.