The blending of aliphatic polyolefins and aromatic poly(ethylene terephthalate) (PET) based on different intrinsic viscosities (IV) was conducted in a torque rheometer. The comparison of blend components in terms of low density polythene (LDPE) and polypropylene (PP) in blending with PET was investigated, and the effects of the IV and proportion of PET on polymer blends are discussed in detail. Polymer blends with or without compatibilizer were examined by using a differential scanning calorimeter, thermogravimetric analyzer, rotary rheometer, field-emission scanning electron microscopy and a universal testing machine. It was found that the blending led to an increase in processability and a decrease in thermal stability for blends. The morphological analysis revealed that the incompatibility of blends was aggravated by a higher IV of PET, while this situation could be improved by the addition of compatibilizer. Results showed that there was an opposite effect for the tensile strength and the elongation at break of the polymer blend in the presence of a compatibilizer, wherein the influence of IV of PET was complicated.
Mechanical stretching is commonly used for mesogen alignment which is essential for the muscle-like actuations of liquid crystal elastomers (LCEs). Despite the simplicity of the method, the mesogens are typically aligned in the stretching direction, limiting exclusively the LCE to an actuation mode of cooling-induced elongation. Here, we design an interpenetrating double network consisting of an LCE network and an elastomer network, with one polymerized network stretched before the polymerization of the other network. Depending on the polymerization sequence of the two networks, the double network shows two opposite actuation modes, namely, the conventional cooling-induced elongation or an unusual cooling-induced contraction. Strategic integration of the two opposite behaviors into the same LCE leads to sophisticated actuation difficult to achieve with a conventional LCE design. Coupled with 3D printing, geometrically complexed LCEs with diverse multimodal four-dimensional actuation behaviors are illustrated. Our work expands the design scope of LCE actuators and their potential device applications.
The evolution of miniaturized spectroscopic tools is pivotal for expanding the application of spectral data across scientific, industrial, and consumer domains. Recent advancements in computationally augmented systems have dramatically reduced device form factors toward those compatible with consumer tech integration. However, for a commercial reality, most applications demand operation across visible to short-wave infrared (SWIR) range. In this regard, existing miniaturized devices are either constrained by physical properties; use complex, costly, or unscalable fabrication techniques; or require multiple components to address separate parts of the spectrum. Here, we report on a low-cost, visible to SWIR, miniaturized spectrometer design enabled by a mass-producible, nonlithographic method of engineering planar dispersive elements from widely available plastics. By deforming shape memory epoxies, we encode spectral information, which is processed by a complementary metal oxide semiconductor sensor array and reconstructed via algorithms. This design offers broadband capability from 400 to 1600 nanometers and enables line-scanning spectral imaging, paving the way for affordable spectrometers.
Three kinds of modified poly(ethylene terephthalate) (PET) were prepared by solution blending combined with melt post-polycondensation, using 4,4′-thiodiphenol (TDP), 4,4′-oxydiphenol (ODP) and hydroquinone (HQ) as the bisphenols, respectively. The effects of TDP, ODP and HQ on melt post-polycondensation process and crystallization kinetics, melting behaviors, crystallinity and thermal stability of PET/bisphenols complexes were investigated in detail. Excellent chain growth of PET could be achieved by addition of 1 wt% bisphenols, but intrinsic viscosity of modified PET decreased with further bisphenols content. Intermolecular hydrogen bonding between carbonyl groups of PET and hydroxyl groups of bisphenols were verified by Fourier transform infrared spectroscopy. Compare to pure PET, both the crystallization rate and melting temperatures of PET/bisphenols complexes were reduced obviously, suggesting an impeded crystallization and reduced lamellar thickness. Moreover, the structural difference between TDP, ODP and HQ played an important role on crystallization kinetics. It was proposed that the crystallization rate of TDP modified PET was reduced significantly due to the larger amount of rigid benzene ring and larger polarity than that of PET with ODP or HQ. X-ray diffraction results showed that the crystalline structure of PET did not change from the incorporation of bisphenols, but crystallinity of PET decreased with increasing bisphenols content. Thermal stability of modified PET declined slightly, which was hardly affected by the molecular structure of bisphenols.