The Ou River, a medium-sized river in the southeastern China, is examined to study the estuarine turbidity maximum (ETM) response to rapidly varied river discharge, i.e., peak river discharge (PRD). This study analyzes the difference in ETM and sediment transport mechanisms between low-discharge and PRD during neap and spring tides by using the Finite-Volume Community Ocean Model. The three-dimensional model is validated by in-situ measurements from 23 April to 22 May 2007. In the Ou River Estuary (ORE), ETM is generally induced by the convergence between river runoff and density-driven flow. The position of ETM for neap and spring tides is similar, but the suspended sediment concentration during spring tide is stronger than that during neap tide. The sediment source of ETM is mainly derived from the resuspension of the seabed. PRD, compared with low-discharge, can dilute the ETM, but cause more sediment to be resuspended from the seabed. The ETM is more seaward during PRD. After PRD, the larger the peak discharge, the longer the recovery time will be. Moreover, the river sediment supply helps shorten ETM recovery time. Mechanisms for this ETM during a PRD can contribute to studies of morphological evolution and pollutant flushing.
Coastal tidal flat wetlands are valuable natural resources that provide diverse habitats and important ecological barriers. The physical environment of the intertidal zone poses many challenges to the monitoring of tidal flat topography, making it difficult to implement traditional measurement methods, and satellite remote sensing combined with tide level information makes it possible to invert coastal tidal flat topography more conveniently over large areas. Current methods based on inundation frequency fail to consider the effect of water level distribution of remote sensing images, and usually use all available remote sensing images. However, the uneven distribution of image tide levels will increase the error of the tidal flat construction. Therefore, in this study, according to the distribution characteristics of the water level in remote sensing images, we adaptively exclude the images with a concentrated water level distribution, so as to make the water level distribution more uniform, and thus reduce the topographic inversion error. The validation results of the inversion accuracy show that the root mean squared error of the tidal flat topographic inversion improved by about 5 cm compared with the previous inundation frequency method, which is suitable for reconstructing the tidal flat topography on a large scale and a long-time scale, and it can be used as a basis for coastal tidal flat protection and restoration decision making.
25 January 2023 in Estuarine, Coastal and Shelf Science
Previous studies have investigated the characteristics and influencing factors of plume bulge in the Pearl River Estuary (PRE) using observations and numerical simulations. However, the understanding of how river discharge affects plume bulge is not consistent, and the response mechanism of plume bulge to changes in river discharge has not been revealed in detail. In this study, a three-dimensional hydrodynamic Finite-Volume Coastal Ocean Model (FVCOM) is constructed, and five experiments were set to characterize the horizontal and vertical distribution of the plume bulge outside the PRE under different river discharge conditions during spring tide. The physical mechanisms of plume bulge generation and its response mechanisms to river discharge were discussed through standardized analysis and momentum diagnostic analysis. The results indicate that the plume bulge is sensitive to changes in river discharge. When the river discharge is relatively low (e.g., less than 11,720 m3/s observed in the dry season), the bulge cannot be formed. Conversely, when the river discharge is relatively high (e.g., exceeding 23,440 m3/s observed in flood season), the bulge is more significant. The plume bulge is formed by the anticyclonic flow resulting from the action of the Coriolis force on the strongly mixed river plume. The bulge remains stable under the combined effects of barotropic force, baroclinic gradient force, and Coriolis force. The reduction of river discharge weakens the mixing of freshwater and seawater, resulting in the reduction of both the volume and momentum of the river plume, and the balance between advective diffusion and Coriolis forces are altered, resulting in the plume, which is originally flushed out from the Lantau Channel, not being able to maintain the anticyclonic structure and instead floating out along the coast of the western side of the PRE, with the disappearance of the plume bulge. Due to the significant influence of plume bulges on the physical and biogeochemical interactions between estuaries and terrestrial environments, studying the physical mechanisms behind the formation of plume bulges is crucial.
9 August 2025 in Journal of Geophysical Research: Oceans