In recent years, the optimization of diesel engine exhaust mufflers has predominantly targeted acoustic performance, while the impact on engine power performance has often been overlooked. Therefore, this paper proposes a parallel perforated tube expansion muffler and conducts a numerical analysis of its acoustic and aerodynamic performance using the finite element method. Then, a Kriging model is established based on the Design of Experiments to reveal the impact of different parameter couplings on muffler performance. With transmission loss (TL) and pressure loss (PL) as the optimization objectives, a multi-objective optimization study is carried out using the competitive multi-objective particle swarm optimization (CMOPSO). The optimization results indicate that this method can simplify the optimization model and improve optimization efficiency. After CMOPSO calculation, the average TL of the muffler increased from 27.3 dB to 31.6 dB, and the PL decreased from 1087 Pa to 953 Pa, which reduced the exhaust noise and improved the fuel economy of the engine, thus enhancing the overall performance of the muffler. This work provides a reference and guidance for the optimal design of mufflers for small agricultural diesel engines.

Hydrogen is a promising zero-carbon fuel, and its application in the micro-combustor can promote carbon reduction. The structural design of micro-combustors is crucial for combustion characteristics and thermal performance improvement. This study investigates the premixed combustion characteristics of hydrogen/air in a micro-cylindrical combustor with double ribs, using an orthogonal design method to assess the impact of various geometric parameters on thermal performance. The results indicate that the impact of rib height, rib position, and inclined angle is greater than rib width and their interactions, while their influence decreases in that order. Increased rib height improves mean wall temperature and exergy efficiency due to an expanded recirculation region and increased flame–wall contact, but negatively affects temperature uniformity and combustion efficiency. Although double ribs enhance performance, placing them too close may reduce heat transfer due to the low-temperature region between the ribs. When the double ribs are positioned at the axial third equinoxes of the micro-combustor, the highest mean wall temperature is achieved. Meanwhile, with a rib height of 0.3 and an inclined angle of 45°, the micro-combustor achieves optimal thermal performance, with the mean wall temperature increasing by 61.32 K.

In recent years, biofuels have gained considerable prominence in response to growing concerns about resource scarcity and environmental pollution. Previous investigations have revealed that the appropriate blending of iso-propanol–butanol–ethanol (IBE) into diesel significantly improves both the c combustion efficiency and emission performance of internal combustion engines (ICEs). However, the combustion mechanism of IBE–diesel for the numerical studies of engines has not reached maturity. In this study, a skeletal IBE–diesel multi-component mechanism, comprising 157 species and 603 reactions, was constructed using the decoupling method. It was formulated by amalgamating the reduced fuel-related sub-mechanisms derived from diesel surrogates (n-dodecane, iso-cetane, iso-octane, toluene, and decalin) and n-butanol, along with the detailed core sub-mechanisms of C₁, C₂, C₃, CO, and H₂. The constructed mechanism is capable of better matching the physical and chemical properties of actual diesel fuel. Extensive validation, including ignition delay, laminar flame speed, a premixed flame species profile, and engine experimental data, confirms the reliability of the mechanism in engine numerical studies. Subsequent investigations reveal that as the IBE blend ratio and EGR rate increase, the ignition delay exhibits an increase, while the combustion duration experiences a decrease. Blending IBE into diesel, along with a specific EGR rate, proves effective in simultaneously reducing NOx and soot emissions.