Tianshu Wang

Prof. Tianshu Wang

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2018 in Composite Structures
Verified
Journal Article
Closed access
YHYixin Huang
Yixin Huang
TWTianshu Wang
Tianshu Wang
YZYang Zhao
Yang Zhao
PWPingping Wang
Pingping Wang

1 July 2009 in Robotica
Verified
Journal Article
Closed access
PDF file
LNLiu Ning
Liu Ning
LJLi Junfeng
Li Junfeng
TWTianshu Wang
Tianshu Wang
SUMMARY: We have made a systematic study of the gait of a straight leg planar passive walking model through simulations and experiments. Three normalised parameters, which represent the foot radius, the position of the mass centre and the moment of inertia, are used to characterise the walking model.In the simulation, we have obtained the fixed points and the basins of attraction of the walking models with different parameter combinations by the aid of the cell mapping method. With the results of fixed points, we investigated the effects of parameter variations on the gait descriptors, including step length, period, average speed and energy inefficiency. A model that has a large basin of attraction has been obtained, and it can start walking far from its fixed point. However, the size of the basin of attraction is not a good measurement of robustness. Thus, we proposed floors with random slope angles or stairs with random heights to test robustness. Five hundred times of simulations with 100 non-dimensional time units were implemented for each parameter combination. The times that the walker failed to arrive at the end were recorded. The simulation results showed that the model with a larger foot radius and higher position of mass centre has a lower possibility of falling on uneven floors. A large moment of inertia is helpful for walking on a random slope angle floor, while low values of moment of inertia are good for navigating random stairs.Prototype experiments have validated the simulation results, which showed that models with larger feet have a longer step length and high speed. However, period differences were difficult to obtain in the experiments since the differences were very small. We have tested the sensitivity with the initial conditions of the models with different foot radii on a flat floor, and have also tested the robustness of the models on a floor with random slope angles. The times that the model reached the end of the floor were recorded. The experimental results showed that a large foot radius is good for improving the basin of attraction and robustness on uneven floors. Finally, the exceptions of the experiment are explained.

2 December 2010 in Robotica
Verified
Journal Article
Closed access
PDF file
FQFeng Qi
Feng Qi
TWTianshu Wang
Tianshu Wang
JLJunfeng Li
Junfeng Li
SUMMARY: This paper presents a new planar passive dynamic model with contact between the feet and the ground. The Hertz contact law and the approximate Coulomb friction law were introduced into this human-like model. In contrast to McGeer's passive dynamic models, contact stiffness, contact damping, and coefficients of friction were added to characterize the walking model. Through numerical simulation, stable period-one gait and period-two gait cycles were found, and the contact forces were derived from the results. After investigating the effects of the contact parameters on walking gaits, we found that changes in contact stiffness led to changes in the global characteristics of the walking gait, but not in contact damping. The coefficients of friction related to whether the model could walk or not. For the simulation of the routes to chaos, we found that a small contact stiffness value will lead to a delayed point of bifurcation, meaning that a less rigid surface is easier for a passive model to walk on. The effects of contact damping and friction coefficients on routes to chaos were quite small.

11 November 2008 in Journal of Sound and Vibration
Verified
Journal Article
Closed access
WWWang Wei
Wang Wei
LJLi Junfeng
Li Junfeng
TWTianshu Wang
Tianshu Wang

1 July 2023 in Journal of Guidance, Control, and Dynamics
Verified
Journal Article
Closed access
PWPeidong Wang
Peidong Wang
TWTianshu Wang
Tianshu Wang
JSJun Sun
Jun Sun
ZXZhang Xianliang
Zhang Xianliang
TSTing Song
Ting Song
Dual quaternions can describe both three-dimensional translation and three-dimensional rotation and have the advantages of a simple form, accurate modeling, and precise physical meaning in terms of dynamic modeling. The traditional rigid-body dynamics modeling theory based on dual quaternions is only applicable to the case of modeling for the center of mass. When modeling appendages, the flexible appendages must be symmetrically configured to reduce the modeling complexity. However, in space operations, flexible appendages are usually not symmetrically installed, which significantly limits the applications of dual-quaternion theory. In this paper, we propose a new dual-quaternion derivative rule and a rigid-body dynamic modeling method suitable for any point. The theory can be applied to model flexible appendages with any configuration without changing the mathematical modeling framework. Finally, we demonstrate the integrated dynamic equation of a rigid–flexible coupling system considering the coupling of position and attitude, and we verify the correctness of the model by numerical simulation.

27 June 2018 in Journal of Mechanisms and Robotics
Verified
Journal Article
Closed access
PDF file
JHJingchen Hu
Jingchen Hu
TWTianshu Wang
Tianshu Wang
This paper presents a method to minimize the base attitude disturbance of a space robot during target capture. First, a general dynamic model of a free-floating space robot capturing a target is established using spatial operator Algebra, and a simple analytical formula for the base angular velocity change during the impact phase is obtained. Compared with the former models proposed in the literature, this model has a simpler form, a wider range of applications, and O(n) computation complexity. Second, based on the orthogonal projection matrix lemma, we propose the generalized mass Jacobian matrix (GMJM) and find that the base angular velocity change is a constant multiple of the component which the impact impulse projects to the column space of the GMJM. Third, a new concept, the base attitude disturbance ellipsoid (BADE), is proposed to express the relationship between the base attitude disturbance and the impact direction. The impact direction satisfying the minimum base attitude disturbance can be straightforwardly obtained from the BADE. In particular, for a planar space robot, we draw the useful conclusion that the impact direction unchanged base attitude must exist. Furthermore, the average axial length of the BADE is used as a measurement to illustrate the average base attitude disturbance under impact impulses from different directions. With this measurement, the desired pre-impact configuration with minimum average base attitude disturbance can be easily determined. The validity and the efficiency of this method are verified using a three-link planar space robot and a 7DOF space robot.