In the framework of the Artemis-1 mission, 10 CubeSats will be released, including the 6U CubeSat ArgoMoon, built by the Italian company Argotec and coordinated by the Italian Space Agency. The primary goal of ArgoMoon is to capture images of the Interim Cryogenic Propulsion Stage. Then, ArgoMoon will be placed into a highly elliptical orbit around the Earth with several encounters with the Moon. In this phase, the navigation process will require a precise Orbit Determination (OD) and a Flight Path Control (FPC) to satisfy the navigation requirements. The OD will estimate the spacecraft trajectory using ground-based radiometric observables. The FPC is based on an optimal control strategy designed to reduce the dispersion with respect to the reference trajectory and minimize the total ΔV. A linear approach was used to determine the optimal targets and the number and location of the orbital maneuvers. A covariance analysis was performed to assess the expected OD performance and its robustness. The analysis results show that the reference translunar trajectory can be successfully flown and the navigation performance is strongly dependent on the uncertainties of the ArgoMoon’s Propulsion Subsystem and of the orbit injection.

AstroBio CubeSat is a mission funded by the Italian Space Agency aimed at validating novel lab-on-chip technology, that would enable the use of micro- and nanosatellites as autonomous orbiting laboratories for research in astrobiology. This 3U CubeSat is equipped with a passive magnetic attitude control system (PMACS), including permanent magnets and hysteresis strips, which allows for stabilizing the spacecraft with the longitudinal axis in the direction of the geomagnetic field vector. This work presents the process followed for the experimental characterization of the system, performed on the engineering unit of the satellite by using a Helmholtz cage facility and a spherical air-bearing to recreate environmental conditions similar to the ones experienced during the orbital motion. The hysteresis strips are characterized starting from the determination of the hysteresis loop, from which the energy dissipation per cycle and the apparent magnetic permeability are extracted. Tests performed by using the Helmholtz cage and the air-bearing facility allows for further investigating the damping torque produced by the PMACS and validating the abovementioned parameters. Numerical analysis is then used to select the number of permanent magnets which allows for achieving a pointing accuracy within an error of ${10}^{\circ }$ within 24 h from the deployment. The analysis of the flight data supports the results obtained from the experimental test campaigns, confirming the effectiveness of the proposed methods and of the PMACS design.