A method is proposed to modulate phase using variant square holes in a metallic film based on a fundamental mode approximation model. Phase retardation through square holes in a subwavelength scale in a thin metal film has been analyzed and calculated. Based on the model, a structured lens with a numerical aperture of 0.583 and a focal length of formed by a 2D square hole array in a metallic film is designed. Numerical simulation using the finite-difference time-domain method is carried out, and the results agree with the theoretical analysis. A focal spot close to the diffraction limit can be obtained.
We present a compact high-efficiency and high-average-power diode-side-pumped Nd:YAG rod laser oscillator operated with a linearly polarized fundamental mode. The oscillator resonator is based on an L-shaped convex–convex cavity with an improved module and a dual-rod configuration for birefringence compensation. Under a pump power of , a linearly polarized average output power of at is obtained, which corresponds to an optical-to-optical conversion efficiency of 29.4%. The laser is operated at a repetition rate of with a beam quality factor of . To the best of our knowledge, this is the highest optical-to-optical efficiency for a side-pumped Nd:YAG rod laser oscillator with a 100-W-level output ever reported.
In this paper, we develop a kW-level high-repetition-rate nanosecond master oscillator power amplifier (MOPA) laser system, employing a structure of fiber, Nd:YVO4, and Nd:YAG hybrid amplification. A tunable fiber seed source is used for adjustable pulse repetition frequency and pulse width. The Nd:YVO4 pre-amplifier, which is dual-end-pumped, achieves high gain while maintaining good beam quality, and the high-power side-pumped Nd:YAG slab main-amplifier enables efficient power amplification. The repetition rate of the output laser can be adjusted within the range of 1~20 kHz, and the pulse width can be tuned within the range of 10~300 ns. The seed output is 6 mW at a repetition frequency of 20 kHz; we achieve an average output power of 1240 W with a total power extraction efficiency of 39.1% and single-pulse energy of 62 mJ at a pulse width of 301 ns. This parameter-controllable high-power laser holds promise for applications in the laser cleaning of complex surface contaminants.