Jiajie Yang

Ms. Jiajie Yang

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
YKYang Ke
Yang Ke
JLJianhua Li
Jianhua Li
JYJiajie Yang
Jiajie Yang
LXLixin Xu
Lixin Xu
Microelectromechanical System (MEMS) gyroscopes are inertial sensors used to measure angular velocity. Due to their small size and low power consumption, MEMS devices are widely employed in consumer electronics and the automotive industry. MEMS gyroscopes typically use closed-loop control systems, which often use PID controllers with fixed parameters. These classical PID controllers require a trade-off between overshoot and rise time. However, temperature variations can cause changes in the gyroscope’s parameters, which in turn affect the PID controller’s performance. To address this issue, this paper proposes an adaptive PID controller that adjusts its parameters in response to temperature-induced changes in the gyroscope’s characteristics, based on the error value. A closed-loop control system using the adaptive PID was developed in Simulink and compared with a classical PID controller. The results demonstrate that the adaptive PID controller effectively tracked the changes in the gyroscope’s parameters, reducing overshoot by 96% while maintaining a similar rise time. During gyroscope startup, the adaptive PID controller achieves faster stabilization with a 0.036 s settling time, outperforming the 0.06 s of the conventional PID controller.

29 October 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
JYJiajie Yang
Jiajie Yang
LXLixin Xu
Lixin Xu
YKYang Ke
Yang Ke
This paper presents an integrated passive device (IPD) structure based on fan-out wafer-level packaging (FOWLP) for the front end of frequency-modulated continuous wave (FMCW) radar systems, focusing on enhancing the integration efficiency and performance of large passive components like antennas. Additionally, a new metric is introduced to assess this structure’s effect on the average noise figure in FMCW systems. Using this metric as a loss function, we apply the support vector machine (SVM) for electromagnetic simulation and the genetic algorithm (GA) for optimization. The sample fitting variance is 2.42 dB, reducing computation time from 12 min to under 1 millisecond, with the entire optimization completed in less than 100 s. The optimized IPD structure is 0.7 × 0.9 × 0.014 λ03 in size and achieves over 35 dB isolation between the transmitter and receiver. Compared to the IPD model calculated by empirical formulas, the optimized device lowers the average noise figure by 15.2 dB and increases maximum gain by 4.19 dB.

24 February 2026 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YKYang Ke
Yang Ke
JLJianhua Li
Jianhua Li
JYJiajie Yang
Jiajie Yang
LXLixin Xu
Lixin Xu
MEMS gyroscopes are highly sensitive to environmental disturbances such as time-varying temperature, vibration, and random noise.To address these issues, this work proposes an online intelligent control method based on reinforcement learning, implemented using the proximal policy optimization (PPO) algorithm. A gyroscope dynamical model with error terms is first established, followed by the formulation of the control problem as a Markov decision process. An online control framework is then developed, in which control actions are adaptively adjusted according to the observed system states. A hardware-in-the-loop (HIL) experimental platform is constructed to enable real-time control of a physical gyroscope. Experimental results show that, during the startup phase, the proposed method reduces the drive-voltage overshoot by 90% compared with a PID controller. During long-term steady operation, the bias stability is improved by 26%. These results demonstrate that RL-based online control can enhance both the transient response and long-term stability of MEMS gyroscopes under real-world disturbances.

3 June 2026 in IEEE Journal on Multiscale and Multiphysics Computational Techniques
Verified
Journal Article
Closed access
JYJiajie Yang
Jiajie Yang
LXLixin Xu
Lixin Xu
YKYang Ke
Yang Ke
Thermal effects pose a significant challenge to the electromagnetic transmission and circuit-level performance of compact radio-frequency (RF) modules based on advanced packaging technology. To address the limitations of conventional thermal–electrical coupling analysis methods and thermal-management approaches for RF integrated modules, this paper presents an algorithm-assisted modeling (AAM)-based thermal–electromagnetic–circuit coupling analysis method and package-level heat-dissipation layout designs for a fan-out wafer-level packaging (FOWLP)-based frequency-modulated continuous-wave (FMCW) RF module. First, an FOWLP-based FMCW RF module is developed as the analysis platform. Then, the proposed AAM-based method introduces the nonuniform temperature distribution into the electromagnetic and circuit-level analysis of the RF module. The results show that, as the ambient temperature increases, the $S$-parameter curves exhibit more pronounced fluctuations, and the reduction in intermediate-frequency signal-to-noise ratio (SNR) calculated by the AAM-based method relative to the uniform-temperature model also increases. Finally, three horizontal heat-dissipation layouts based on through-mold via (TMV) chips and solder-ball arrays are designed and evaluated. Without changing the original package dimensions, the proposed layouts improve both thermal and system-level RF performance. The hybrid layout reduces the maximum temperature and the area exceeding $40^{\circ }\mathrm{C}$ by $6.0\%$ and $52.2\%$, respectively. The uniform layout provides the largest improvements in transmit power and intermediate-frequency SNR, with increases of $\rm{2.93}\,\rm{dB}$ and $\rm{1.51}\,\rm{dB}$, respectively.

17 June 2025 in Micromachines
Verified
Journal Article
Open access
PDF file
JYJiajie Yang
Jiajie Yang
LXLixin Xu
Lixin Xu
XYXiangyu Yin
Xiangyu Yin
YKYang Ke
Yang Ke
In this paper, the fabrication and testing of an integrated passive device (IPD) structure for X-band FMCW radar based on the fan-out wafer-level packaging (FOWLP) process are discussed. First, a transition line structure is added to the IPD structure to increase the upper impedance limit of the substrate, so as to reduce the process implementation difficulty and development cost. Second, the vertical soldered SubMiniature Push-On Micro (SMPM) interfaces testing method is proposed, reducing the testing difficulty of the dual-port structure with the antenna. Finally, the process fabrication as well as testing of the IPD structure are completed. The dimensions of the fabricated structure are 16.983 × 24.099 × 0.56 mm3. Test results show that, with a center frequency of 8.5 GHz, the actual operational bandwidth of the structure reaches 7.66% (8.095–8.74 GHz), with a maximum isolation of 33.9 dB. The bandwidth with isolation greater than 20 dB is 1.76% (8.455–8.605 GHz). The maximum gain at the center frequency is 2.02 dBi. Additionally, experimental uncertainty analysis is performed on different IPD structures, and the measurement results are basically consistent. These results validate the feasibility of the FOWLP process in the miniaturization of X-band FMCW radar antenna and other passive devices.