Aiming at the challenging underwater navigation of autonomous underwater vehicle (AUV), this paper develops a novel filtering method with guided trajectory. The relatively low frequency of ultra-short baseline positioning system (USBL) measurement and the noise caused by complex scenes have a significant impact on the accuracy of AUV motion estimation. Although the existing adaptive extended Kalman filter (EKF) and adaptive unscented Kalman filter (UKF) which can roughly eliminate these outliers, the filtering results of these algorithms are not smooth and have the serious degree of the jitter, and then greatly affect the local consistency and quality of topographic map seamless stitching. We exploit the relatively smooth strap-down inertial navigation system (SINS) as the guided trajectory for motion estimation, and propose a trajectory smoothness preserving filter algorithm. This system has the advantage of maintaining local gradient consistency, which not only improves the navigation accuracy, but also ensures the smoothness of the estimation system. Simulation results show that our approach has high robustness and good smoothness. The effectiveness and practicability of the method are demonstrated by real experiments in multiple deep-sea areas with an average depth of more than 1000 meters in the southwest Indian Ocean.
Deep reinforcement learning models have the advantage of being able to control nonlinear systems in an end-to-end manner. However, reinforcement learning controllers trained in simulation environments often perform poorly with real robots and are unable to cope with situations where the dynamics of the controlled object change. In this paper, we propose a DRL control algorithm that combines progressive networks and context as a depth tracking controller for AUVs. Firstly, an embedding network that maps interaction history sequence data onto latent variables is connected to the input of the policy network, and the context generated by the network gives the DRL agent the ability to adapt to the environment online. Then, the model can be rapidly adapted to a new dynamic environment, which was represented by the presence of generalized force disturbances and changes in the mass of the AUV, through a two-stage training mechanism based on progressive neural networks. The results showed that the proposed algorithm was able to improve the robustness of the controller to environmental disturbances and achieve fast adaptation when there were differences in the dynamics.
To extend the near-seabed survey operation duration of deep-sea Autonomous Underwater Vehicles (AUVs), this paper proposes a deep-sea bottom-landing and dwelling technical scheme integrating the drive of a variable buoyancy adjustment mechanism with the support of a “biped” telescopic bottom-landing mechanism. This scheme offers a flexible, low-cost, multi-site repeatable bottom-landing process, and sensitive water area-applicable dwelling solution for marine surveys. Firstly, for hard seabed sediments, the mechanical response of AUVs during hard landing under different driving forces and attitudes is solved through simulation analysis, and the local optimal solution of reasonable driving forces is obtained to provide input for the design of the variable buoyancy mechanism. Secondly, for soft seabeds, the variation law of the bottom-leaving adsorption force with different length-to-width ratios (L/B) under the same bottom-landing plate area is studied to provide design input for the telescopic bottom-landing mechanism. Subsequently, the bottom-landing criteria and calculation formulas for flat and uneven seabeds are established, and the bottom-landing and bottom-leaving control strategies are constructed. Finally, the two sets of mechanisms are integrated into the AUV platform. Verification via pool, lake, and sea tests has demonstrated favorable results, and scientific test data of 56 dives within 1 m of the near-seabed are obtained. Traditional technical solutions primarily rely on jettisonable ballast weights or ballast tanks for operations, enabling only a single dive, bottom-landing, and bottom-leaving process. Their concealment and operational depth are often limited. The technical achievement proposed in this paper supports the ABLUV in performing multiple repeated bottom-landing and bottom-leaving operations in deep-sea environments without the need for jettisoning ballast throughout the entire process.