The present work aims to evaluate the feasibility of iron ore tailings from tailing dams as an alternative material for road infrastructure. The iron ore tailings were characterized according to their chemical, mineralogical, environmental, and physical properties. Subsequently, the tailings were chemically stabilized using cement, lime, or steelmaking slag as binder. The tailing-cement, tailing-lime, and tailing-slag mixtures studied consisted of 1, 2, 5, and 10% binder content, each. The characterization methodology included chemical and mineralogical analysis through X-ray fluorescence and diffraction; environmental analysis with leaching and dissolution tests; evaluation of compaction curves; California bearing ratio (CBR) tests and expansion assessment; compressive strength, with curing in moisture chamber or at open air; water absorption; and evaluation of durability of the mixtures. Overall, the results indicate that the iron ore tailings are a feasible solution for use as layers for road p...
1 June 2019 in REM - International Engineering Journal
In this article, we present the results of the mineralogical quantification of airborne dust from an urban area located in the Brazilian state of Minas Gerais in the vicinity of a gold mine. Three samples were collected at different points to assess spatial consistency. Results showed that the mineralogy, in relation to both major minerals and accessory minerals, is very similar for all samples, being predominantly composed of muscovite and quartz, which together account for around 60% to 75% by weight. The accessory minerals are clinochlore, albite, dolomite, calcite and kaolinite and the averages for each range from 4% to 13%. The only trace mineral with concentration below 1% was pyrite which has a concentration below 1%. The results provide an indication that the mining area is not the sole source of local dust, although the mine's contribution is significant.