This study reports a carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) composite film that incorporates Calendula officinalis (CO) extract for biomedical applications. The morphological, physical, mechanical, hydrophilic, biological, and antibacterial properties of CMC/PVA composite films with various CO concentrations (0.1%, 1%, 2.5%, 4%, and 5%) are fully investigated using different experiments. The surface morphology and structure of the composite films are significantly affected by higher CO concentrations. X-ray diffraction (XRD) and Fourier transform infrared spectrometry (FTIR) analyses confirm the structural interactions among CMC, PVA, and CO. After CO is incorporated, the tensile strength and elongation upon the breaking of the films decrease significantly. The addition of CO significantly reduces the ultimate tensile strength of the composite films from 42.8 to 13.2 MPa. Furthermore, by increasing the concentration of CO to 0.75%, the contact angle is decreased from 15.8° to 10.9°. The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay reveals that the CMC/PVA/CO-2.5% and CMC/PVA/CO-4% composite films are non-cytotoxic to human skin fibroblast cells, which is favorable for cell proliferation. Remarkably, 2.5% and 4% CO incorporation significantly improve the inhibition ability of the CMC/PVA composite films against Staphylococcus aureus and Escherichia coli. In summary, CMC/PVA composite films containing 2.5% CO exhibit the functional properties for wound healing and biomedical engineering applications.

Anterior open bite (AOB), characterized by the lack of vertical overlap between upper and lower anterior teeth, poses a considerable challenge in orthodontics. The condition depends on many factors that combine to render it difficult to achieve post treatment stability. AOB is commonly classified as dental, skeletal, or functional on the basis of the clinical presentation and causative factors. Traditionally, skeletal AOB necessitates surgical intervention, whereas nonsurgical approaches such as extrusion arches and the Multiloop Edgewise Archwire Technique (MEAW) can be employed in more straightforward cases. Functional appliances are reserved for situations in which a patient's growth potential offers the possibility of effectively addressing AOB. This review presents a strategic treatment approach for addressing AOB, taking into account the classification and severity of the condition. The proposed SHE framework describes the use of mini-screws (S) for anchorage and vertical control, encouragement to correct habits (H), and the utilization of extractions and elastics (E). By incorporating extra-radicular mini-screws, AOB closure is achieved through anterior retraction in extraction cases or whole arch distalization of dentition with elastics in non-extraction cases. This framework emphasizes habit correction through a regimen of oral myofunctional therapy (OMT) and habit-correcting appliances to enhance posttreatment stability. This review suggests that nonsurgical correction is viable in the majority of cases, whereas surgical intervention should be reserved for severe cases of skeletal vertical overgrowth or horizontal discrepancies.

This study investigated the surface properties and biomechanical behaviors of a nanostructured titanium oxide (TiO) layer with different self-assembled monolayers (SAMs) of phosphonate on the surface of microscope slides. The surface properties of SAMs were analyzed using scanning electron microscopy, X-ray photoemission spectroscopy, and contact angle goniometry. Biomechanical behaviors were evaluated using nanoindentation with a diamond Berkovich indenter. Analytical results indicated that the homogenous nanostructured TiO surface was formed on the substrate surface after the plasma oxidation treatment. As the TiO surface was immersed with 11-phosphonoundecanoic acid solution (PUA-SAM/TiO), the formation of a uniform SAM can be observed on the sample surface. Moreover, the binding energy of O 1s demonstrated the presence of the bisphosphonate monolayer on the SAMs-coated samples. It was also found that the PUA-SAM/TiO sample not only possessed a higher wettability performance, but also exhibited low surface contact stiffness. A SAM surface with a high wettability and low contact stiffness could potentially promote biocompatibility and prevent the formation of a stress shielding effect. Therefore, the self-assembled technology is a promising approach that can be applied to the surface modification of biomedical implants for facilitating bone healing and osseointegration.

In this paper, we used two mass-produced industrial technologies, namely, thermal spraying and anodization methods, to enhance the surface characteristics of AISI 1045 medium carbon steel for use in special environments or products. The anodic film can effectively improve the surface properties of carbon steel. A sequence of treatments of the carbon steel substrate surface that consist of sandblasting, spraying the aluminum film, annealing, hot rolling, cleaning, grinding, and polishing can increase the quality of the anodized film. This paper proposes an anodization process for the surface of carbon steel to increase the corrosion resistance, hardness, color diversification, and electrical resistance. The resulting surface improves the hardness (from 170 HV to 524 HV), surface roughness (from 1.26 to 0.15 μm), coloring (from metal color to various colors), and corrosion resistance (from rusty to corrosion resistant). The electrochemical corrosion studies showed that the AISI 1045 steel surface with a hard anodized film had a lower corrosion current density of 10^−5.9 A/cm² and a higher impedance of 9000 ohm than those of naked AISI 1045 steel (10^−4.2 A/cm² and 150 ohm) in HCl gas.

Phototherapy has been extensively used to prevent and treat signs of aging and stimulate wound healing, and phototherapy through light-emitting diodes (LEDs). In contrast to LED, organic LED (OLED) devices are composed of organic semiconductors that possess novel characteristics. We investigated the regenerative potential of OLED for restoring cellular potential from senescence and thus delaying animal aging. Bone marrow-derived stem cells (BMSCs) and adipose-derived stem cells (ADSCs) were isolated from the control and OLED- treated groups to evaluate their proliferation, migration, and differentiation potentials. Cellular senescence was evaluated using a senescence-associated β-galactosidase (SA-β-gal) activity assay and gene expression biomarker assessment. OLED treatment significantly increased the cell proliferation, colony formation, and migration abilities of stem cells. SA-β-gal activity was significantly decreased in both ADSCs and BMSCs in the OLED-treated group. Gene expression biomarkers from treated mice indicated a significant upregulation of IGF-1 (insulin growthfactor-1). The upregulation of the SIRT1 gene inhibited the p16 and p19 genes then to downregulate the p53 expressions for regeneration of stem cells in the OLED-treated group. Our findings indicated that the survival rates of 10-month aging senescence-accelerated mouse prone 8 mice were prolonged and that their gross appearance improved markedly after OLED treatment. Histological analysis of skin and brain tissue also indicated significantly greater collagen fibers density, which prevents ocular abnormalities and β-amyloid accumulation. Lordokyphosis and bone characteristics were observed to resemble those of younger mice after OLED treatment. In conclusion, OLED therapy reduced the signs of aging and enhanced stem-cell senescence recovery and then could be used for tissue regeneration.

In the present study, the piezoelectric aluminum nitride (AlN)/tantalum (Ta) (PAT) thin film was investigated as a biocompatible film and osseointegrated with biomedical devices such as implants. The stress variation on the interaction of cells with the PAT surface was investigated using osteoblast-like cells (MG-63) and fibroblast cells (NIH3T3). A singular behavior was observed on the PAT film with a (002) texture, in which the MG-63 cells were more dispersed and displayed longer and more filopodia than the NIH3T3 cells. Moreover, the MG-63 cells showed ingrowth, adherence, and proliferation on the PAT film surface. The MG-63 cells had more obvious stress variation than the NIH3T3 cells in the differentiation and proliferation. The mechanobiological reaction to cell differentiation and proliferation not only caused osseointegration, but also reduced the surface activation energy, thus enhancing bone remodeling. The formation of a nanopolycrystalline PAT film is believed to enhance the mechanobiological effect, promoting osseointegration.