Ocean wind and wave parameters can be measured by in-situ sensors such as anemometers and buoys. Since the 1980s, X-band marine radar has evolved as one of the remote sensing instruments for such purposes since its sea surface images contain considerable wind and wave information. The maturity and accuracy of X-band marine radar wind and wave measurements have already enabled relevant commercial products to be used in real-world applications. The goal of this paper is to provide a comprehensive review of the state of the art algorithms for ocean wind and wave information extraction from X-band marine radar data. Wind measurements are mainly based on the dependence of radar image intensities on wind direction and speed. Wave parameters can be obtained from radar-derived wave spectra or radar image textures for non-coherent radar and from surface radial velocity for coherent radar. In this review, the principles of the methodologies are described, the performances are compared, and the pros and cons are discussed. Specifically, recent developments for wind and wave measurements are highlighted. These include the mitigation of rain effects on wind measurements and wave height estimation without external calibrations. Finally, remaining challenges and future trends are discussed.
A shadowing-analysis-based algorithm is modified to estimate significant wave height from shipborne X-band nautical radar images. Shadowed areas are first extracted from the image through edge detection. Smith’s function fit is then applied to illumination ratios to derive the root mean square (RMS) surface slope. From the RMS surface slope and the mean wave period, the significant wave height is estimated. A data quality control process is implemented to exclude rain-contaminated and low-backscatter images. A smoothing scheme is applied to the gray scale intensity histogram of edge pixels to improve the accuracy of the shadow threshold determination. Rather than a single full shadow image, a time sequence of shadow image subareas surrounding the upwind direction is used to calculate the average RMS surface slope. It has been found that the wave height retrieved from the modified algorithm is underestimated under rain and storm conditions and overestimated for cases with low wind speed. The modified method produces promising results by comparing radar-derived wave heights with buoy data, and the RMS difference is found be 0.59 m.
18 April 2016 in Canadian Journal of Remote Sensing
In this article, a comparison of signal-to-noise ratio (SNR) and shadowing-based algorithms for ocean wave height estimation from ship-borne X-band nautical radar sea surface images is presented. Modifications, including selecting a subarea along the upwind direction and smoothing the edge pixel intensity histogram, are made to the original shadowing algorithm to achieve more accurate wave height measurements. Tests of the algorithms are conducted using radar and buoy data acquired in a sea trial in the North Atlantic Ocean off the east coast of Canada. Compared with the original shadowing algorithm, the modified algorithm improves the wave height estimation with a decrease of about 1.70 m in the root mean square (RMS) difference with respect to in situ measurements. In addition, the result of the comparison shows that the modified shadowing algorithm produces more accurate wave heights than the SNR method with improvements of about 0.05 in the correlation coefficient and about 0.04 m in the RMS difference.