Myles Overall

Mr. Myles Overall

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 October 2024 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
SKSagar Keshari
Sagar Keshari
SMShakir Mahmud
Shakir Mahmud
SPSakar Pahari
Sakar Pahari
MOMyles Overall
Myles Overall
Dario BabićDario Babić
Dario Babić
PSPeter T. Savolainen
Peter T. Savolainen
Warning signs are often deployed at bridge overpasses during winter to warn motorists of potentially icy surface conditions on the bridge, although the effectiveness of these signs is questionable. One potential improvement to the standard signage methods is the bridge deck warning system (BDWS), which activates a flashing warning sign border or beacon when conditions warrant based on real-time weather and bridge surface data. However, BDWSs have not been broadly implemented in the United States, and consequently, their effectiveness as a safety countermeasure is not well established. To address this knowledge gap, a series of winter field evaluations were performed along three freeway bridge overpasses in Michigan to assess the effectiveness of various BDWS strategies as a speed reduction countermeasure for motorists approaching a potentially icy bridge. The results showed that a BDWS with a flashing light emitting diode (LED) border reduced motorist speeds when encountering a bridge during winter weather conditions compared with the standard “Bridge Ices Before Road” warning sign. The speed reduction effect was consistent between passenger cars and heavy trucks, but was somewhat stronger at night compared with daytime. Greater speed reductions were observed when the BDWS sign was combined with a dynamic speed feedback sign (DSFS) that displayed a “Slow Down” or “Icy Road” message to approaching motorists, with the strongest effects observed when the DSFS message was pulsed between high and low brightness intensities. BDWSs that included only a flashing overhead beacon did not have a significant effect on speeds compared with the standard warning sign.

28 September 2025 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
SPSakar Pahari
Sakar Pahari
SKSagar Keshari
Sagar Keshari
MOMyles Overall
Myles Overall
SPSarah Premo
Sarah Premo
SMShakir Mahmud
Shakir Mahmud
PSPeter T. Savolainen
Peter T. Savolainen
A series of field evaluations were conducted within work zone lane closures on rural freeways in Michigan to determine 1) the optimal positioning of a speed feedback trailer (SFT) approaching an active work area, 2) the effectiveness of a digital speed limit (DSL) sign for posting work zone speed limit reductions, and 3) the effectiveness of a speed feedback panel paired with a DSL. Speed trajectories were collected for vehicles traversing each work zone using a series of handheld light detection and ranging (LiDAR) guns operated by a team of technicians seated in unmarked vehicles within each lane closure. The SFT was found to be increasingly more effective at reducing speeds of vehicles approaching and entering the work area as it was positioned closer to the work area. Positioning the SFT 200 ft from the start of the work area, which was determined to be the optimal position, reduced speeds entering the work area by 3.1 mph compared with when the SFT was positioned further upstream. This SFT position helps ensure that motorists receive timely feedback within sight of the work area while providing sufficient deceleration time to maximize speed reductions as drivers enter the work area. The use of a DSL to reduce the work zone speed limit from 60 mph to 45 mph reduced vehicle speeds by 3.7 mph near DSL. Furthermore, activation of the speed feedback panel that was on the same assembly as the DSL reduced vehicle speeds by an additional 1.8 mph.

17 April 2024 in Smart Cities
Verified
Journal Article
Open access
PDF file
ECEnrique D. Saldivar Carranza
Enrique D. Saldivar Carranza
MOMyles Overall
Myles Overall
DBDarcy Bullock
Darcy Bullock
The speed at which vehicles navigate through roundabouts is information that needs to be considered in the intersection design process, simulation model development, and policy implementation. The last published data on speed profiles by distance was the Federal Highway Administration (FHWA) Roundabouts: an Informational Guide report, published in 2000, which pre-dates the ability to collect large volumes of connected vehicle (CV) data. The objective of this paper is to use a large sample of CV data to provide empirical analysis on vehicle speeds at roundabouts and to determine if previous guidelines are still applicable. Over 15 million speed records sampled at 56 roundabouts in Carmel, Indiana, from February to May 2023 during weekdays are categorized by turn type (i.e., right, through, or left) and by roundabout section (i.e., approach, circulation, or departure). Speed profiles and distributions for each category are analyzed by four different time-of-day (TOD) periods. The speed distribution analysis by roundabout section shows that 85% of vehicles travel under 34, 22, and 35 miles per hour (mph) on the approach, circulation, and departure zones, respectively. The analysis by turn type indicates that vehicles making left turns consistently maintain speeds below 20 mph when navigating inside roundabouts. In contrast, vehicles proceeding straight through or turning right accelerate soon after entering. Regardless of turn-type or TOD periods, most vehicles depart the roundabouts at similar speeds around 35 mph. A comparison between sampled and theoretical speed profiles reveals that while a state-of-the-practice model accurately estimates vehicle accelerations and decelerations near roundabouts, it does not account for reduced speeds before circulation begins and, in some cases, underestimates values on the circulation and departure sections. The results presented in this paper can be used to update current knowledge on vehicle speeds at roundabouts. Furthermore, local and state transportation agencies can use the presented technique to periodically update travel speed knowledge for their roundabouts where CV data or detection technology to derive traveling speeds is available.

3 October 2025 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
SPSakar Pahari
Sakar Pahari
SKSagar Keshari
Sagar Keshari
SPSarah Premo
Sarah Premo
MCMagdalena Cavka
Magdalena Cavka
MOMyles Overall
Myles Overall
PSPeter T. Savolainen
Peter T. Savolainen
A series of field evaluations were performed to assess the speed reduction effects of a speed feedback trailer (SFT) positioned at various locations before and after a median crossover section within a freeway construction work zone. The SFT was evaluated at three positions at the lane closure taper approaching the median crossover: 1) taper start, 2) taper end, and 3) 800 ft beyond the taper end near the initial R2-1a “Where Workers Present 45” speed limit sign. The SFT was also evaluated within the barrier-divided two-way traffic section after the traffic had crossed over the median. Vehicle speeds approaching the SFT were measured at several locations using LiDAR guns. Positioning the SFT slightly beyond the end of a lane closure taper, adjacent to the nearest R2-1a sign resulted in speed reductions that were both greater in magnitude and sustained further into the work zone compared with when the SFT was located at the taper start or taper end. With the SFT in this position, speeds near the start of the median crossover, which was more than half a mile beyond the SFT and nearly a mile beyond the start of the taper, were 1.4 mph lower compared with when no SFT was present. The SFT was similarly effective for reducing speeds of passenger cars when positioned within the crossover section, although heavy truck speeds were unaffected.

10 November 2025 in Future Transportation
Verified
Journal Article
Open access
PDF file
MOMyles Overall
Myles Overall
JMJustin Mukai
Justin Mukai
Rahul Suryakant SakhareRahul Suryakant Sakhare
Rahul Suryakant Sakhare
JDJairaj Chetas Desai
Jairaj Chetas Desai
HLHillary Lowther
Hillary Lowther
DBDarcy Bullock
Darcy Bullock
Traffic incident management (TIM) practices have been widely demonstrated to reduce congestion and secondary crashes. TIM performance measures have evolved over the years and have been a critical tool for agencies to benchmark their operations and identify opportunity for improvement. This paper discusses how the deployment of incident resources can be tracked to improve the fidelity of those performance measures to help guide their TIM program management. Specifically, the paper focuses on integrating a new TIM reference point that identifies when all necessary recovery resources are on scene (T4,ANRR). The value of this reference point is explained through four detailed case studies, and the ability to tabulate this value at scale is demonstrated for 128 incidents. Subsequently, statistics from 128 incidents are presented. Median recovery resource mobilization time for car crashes, semi crashes, car fires, and semi fires were 32, 42, 45, and 66 min, respectively. However, the upper quartile values for those same types of incidents increased to 55, 66, 69, and 105 min, respectively. Of particular note, the paper demonstrates the importance of careful proactive planning for response resources on incidents involving large vehicles that require significant recovery resources and how those response times extend incident clearance times. Tracking T4,ANRR is a first step toward identifying training and perhaps incentive programs to mitigate delays in obtaining all of the needed recovery resources on scene.

5 January 2026 in Future Transportation
Verified
Journal Article
Open access
PDF file
Rahul Suryakant SakhareRahul Suryakant Sakhare
Rahul Suryakant Sakhare
JDJairaj Chetas Desai
Jairaj Chetas Desai
MOMyles Overall
Myles Overall
JMJustin Mukai
Justin Mukai
JPJuan David Pava
Juan David Pava
DBDarcy Bullock
Darcy Bullock
On 1 November 2024, the Federal Highway Administration issued a final rule updating the 23 CFR Part 630 Subpart J on Work Zone Safety and Mobility, detailing performance measures and reporting requirements. The rule suggests that state agencies should define formal performance measures that can be tracked consistently for the continuity of work zone program management across states. The objective is to help identify work zones needing mobility or safety improvements, as well as provide quantitative feedback on the best practices. The emergence of connected vehicle data over the past few years provides a scalable approach for agencies to calculate and monitor the performance measures defined in the CFR, covering, but not limited to, speed, travel time, queue length and duration, hard braking events and speed differentials. This paper describes techniques that use connected vehicle data to estimate different measures that map into the performance measures defined in this rule. A 2024 work zone in Illinois along I-24 was chosen to demonstrate the utility of the measures. The paper concludes with a discussion of ongoing work applying these derived measures to 101 work zones across 9 states in 2025 to demonstrate scalability.