The article addresses the issue of selecting the initial shape for a drone’s suspended transport container and its impact on the final aerodynamic properties during the flight, specifically aerodynamic drag, based on the simulated pressure differences generated by the suspended container. The motivation arose from the project ITMS2014+:313011 ATR9 titled ‘Research and Development of the Applicability of Autonomous Flying Vehicles in the Fight Against the COVID-19 Pandemic’. The project deals with the transport of biological samples from hospitals to specialized laboratories. These samples, which could be contaminated, necessitated the development of a specialized container meeting all safety criteria. Besides predefined parameters such as the maximum weight of the container, transport speed, dimensions of the internal standardized module for transporting hospital samples, and compliance with required IP (Ingress Protection) and IK (Impact Protection) standards, many other challenges related to the final design solution of the transport container had to be addressed. One such challenge was the fundamental question of what shape the transport container should have, which significantly influences the overall design and construction of the transport module. We attempted to solve this question responsibly and professionally and thoroughly substantiate our results with appropriate simulations in selected simulation software. The outcome was as expected, but it was necessary to adequately justify and support the choice of the shape of the transport container in the context of the project’s resolution. The results are universal and can be applied to other designs for shapes of transport containers in the future or by other researchers working on similar projects.
Biogas and biomethane represent promising domestic fuels compatible with decarbonization targets at a time when diversification of gas sources is essential due to market volatility and increasing security risks. In laboratory practice, however, biogas production is still frequently assessed manually, which increases measurement uncertainty, limits temporal resolution, and reduces comparability between experimental series. We present an open and low-cost platform for continuous monitoring based on the hydrostatic water-displacement principle, complemented by stabilized process conditions (temperature control at 37 °C with short-term variability of approximately ±0.02 °C), continuous measurement with a 1 Hz sampling rate, and cloud-based data visualization. The methodology builds on a standardized procedure grounded in well-defined pressure–height–volume conversion relationships and transparent signal processing, enabling objective comparison of substrates and experimental setups. Validation experiments confirmed the system’s capability to capture short-term transient phenomena, improve reproducibility among parallel reactors, and maintain long-term measurement stability. Long-duration tests demonstrated short-term scatter of approximately 0.06 mL, minimal drift below 0.15% per 24 h, and an expanded uncertainty of roughly 3.1% at 100 mL. In parallel BMP tests, the continuous method yielded final volumes 5.78% higher than the discrete pressure method, reflecting systematic bias introduced by sparse manual sampling and reactor handling. The basic configuration quantifies the cumulative volume and production rate of biogas and is readily extendable to online gas composition analysis. The proposed solution offers a replicable tool for research and education, reduces costs, supports measurement standardization, and accelerates the optimization and subsequent scale-up of biogas technologies toward pilot-scale and industrial applications.