Measuring instruments are intended to be intelligent, precise, multi-functional and developing multidirectionally, scientific, and reasonable; the reliable evaluation of measurement uncertainty of precision instruments is also becoming more and more difficult, and the evaluation of the Coordinate Measuring Machines (CMM) measurement uncertainty is among the typical problems. Based on Geometric Product Specification (GPS), this paper has systematically studied the CMM uncertainty for evaluating the size and geometrical errors oriented toward measurement tasks, and thus has realized the rapid and reliable evaluation of the CMM uncertainty for task-oriented measurement. For overestimation of the CMM uncertainty for task-oriented measurements in the initial evaluation, a systematic optimization solution has been proposed. Finally, the feasibility and validity of the evaluation model and the optimization method have been verified by three different types of measurement examples of diameter, flatness and perpendicularity. It is typical and representative to systematically solve the problem of the CMM uncertainty for evaluating the measurement tasks targeted at dimensions and geometric errors, and the research contents can be effectively applied to solve the uncertainty evaluation problems of other precision instruments, which are of great practical significance not only for promoting the combination of modern uncertainty theory and practical applications but also for improving the application values of precision measurement instruments.
Structural health monitoring is of great importance for the application of composites in aircrafts. Fiber Bragg grating (FBG) sensors are very suitable for structure strain measurement. However, the strain measured by FBG sensors is different from the original strain in host materials. The relationship between them is defined as strain transfer. As composites are anisotropic, the traditional strain transfer model, which regards the elasticity modulus of host materials as a constant, is inadaptable. In this paper, a new strain transfer model is proposed for FBG sensors bonded to the surface of carbon fiber reinforced polymer (CFRP) laminates. Based on the measurement structure, the model is established and the transfer function is derived. The characteristics influencing the strain transfer are analyzed. The stacking directions, stacking numbers, and stacking sequences of CFRP laminates have a distinct effect on the transfer efficiency, which is different from the isotropy host materials. The accuracy of the proposed model was verified by experiments on a nondestructive tensile system, and the maximum model error is less than 0.5%. Moreover, the model was applied to the strain measurement of CFRP wing skin, which indicates that measurement errors decrease by 11.6% to 19.8% after the compensation according to the model.
23 January 2017 in IET Generation, Transmission & Distribution
Enhancement of insulation performance has been a long‐lasting problem for vacuum interrupter (VI) design. Traditional design focuses on reducing the maximal electric field strength (EFS); however, the distribution pattern of electric field also plays an important role in insulating efficiency. A method based on region segmentation is proposed to modify the electric field distribution. By dividing the electric field area, the regression function derived from orthogonal experimental design is established for each unit to reveal the relationship between the structure parameters of VI and EFS. Then the target EFS distribution is designed, and the optimal solution set is obtained by practical swarm optimisation. Fuzzy cluster selection is introduced to choose the design scheme from the solution set. Comparison of the simulation and experimental results shows the effectiveness of the proposed method.
An efficient synthesis of 2-substituted benzoxazoles via copper acetate monohydrate oxidative coupling of aldehydes with o-aminophenol is described. This synthetic strategy has some advantages as simple procedure, inexpensive and easily available catalyst, and facile isolation of the products in moderate to good yields.
Anaerobic digestion (AD) is an economical and effective method to treat sludge. AD with several pretreatments is the prior process to treat surplus sludge for a wastewater treatment plant. During a sludge-treatment process, various methanogens play their specific role in each sludge-processing stage where different methanogens predominate. Therefore, an expert in the shift of methanogen community could facilitate the workers in a plant to understand the efficiency of the sludge-treatment process. In this paper, a membership-fusing model is established to characterize the shift of methanogen community in a three-stage sludge-treatment process. The introduction of fuzzy sets clarifies the vagueness of the methanogen community structure between two processing stages. Dempster–Shafer (DS) evidence theory effectively alleviates the data error generated among paralleling samples. The accuracy of the model was verified, and the result shows the model could clearly distinguish the methanogen community structure of the three stages and make accurate judgment on the processing stage affiliation. The reliability of the model in dealing with different numbers of conflict data was proved and the experiment indicates the model could make a reliable judgment on the processing stage affiliation by reasonably fusing the interference data.