High power vacuum electronic devices of millimeter wave to terahertz regime are attracting extensive interests due to their potential applications in science and technologies. In this paper, the design and experimental results of a powerful compact oversized surface wave oscillator (SWO) in Y-band are presented. The cylindrical slow wave structure (SWS) with rectangular corrugations and large diameter about 6.8 times the radiation wavelength is proposed to support the surface wave interacting with annular relativistic electron beam. By choosing appropriate beam parameters, the beam-wave interaction takes place near the π-point of TM₀₁ mode dispersion curve, giving high coupling impedance and temporal growth rate compared with higher TM_0n modes. The fundamental mode operation of the device is verified by the particle-in-cell (PIC) simulation results, which also indicate its capability of tens of megawatts power output in the Y-band. Finally, a compact experimental setup is completed to validate our design. Measurement results show that a terahertz pulse with frequency in the range of 0.319–0.349 THz, duration of about 2 ns and radiation power of about 2.1 MW has been generated.

Based on the secondary electron emission avalanche (SEEA) model, the SEEA discharge on the vacuum insulator surface is simulated by using a 2D PIC-MCC code developed by ourselves. The evolutions of the number of discharge electrons, insulator surface charge, current, and 2D particle distribution are obtained. The effects of the strength of the applied electric field, secondary electron yield coefficient, rise time of the pulse, length of the insulator on the discharge are investigated. The results show that the number of the SEEA electrons presents a quadratic dependence upon the applied field strength. The SEEA current, which is on the order of Ampere, is directly proportional to the field strength and secondary electron yield coefficient. Finally, the electron-stimulated outgassing is included in the simulation code, and a three-phase discharge curve is presented by the simulation, which agrees with the experimental data.

We propose the concept of high-order mode extended interaction klystron (EIK) at the terahertz band. Compared to the conventional fundamental mode EIK, it operates at the TM₃₁-2π mode, and its remarkable advantage is to obtain a large structure and good performance. The proposed EIK consists of five identical cavities with five gaps in each cavity. The method is discussed to suppress the mode competition and self-oscillation in the high-order mode cavity. Particle-in-cell simulation demonstrates that the EIK indeed operates at TM₃₁-2π mode without self-oscillation while other modes are well suppressed. Driven by the electron beam with a voltage of 15 kV and a current of 0.3 A, the saturation gain of 43 dB and the output power of 60 W are achieved at the center frequency of 342.4 GHz. The EIK operating at high-order mode seems a promising approach to generate high power terahertz waves.

A high performance continuous-wave (CW) backward wave oscillator (BWO) with planar slow wave structure (SWS) and sheet electron beam in Y-band is presented in this paper. The mode selection is discussed by studying the dispersion curve of SWSs, distributions of the electric field, and particle-in-cell simulation results, showing that the designed BWO operates in the fundamental mode TM₁₁. The planar SWSs are fabricated by using the UV-LIGA technology with the processing error less than 0.003 mm. The electron gun can provide the 2.5 mm × 0.14 mm sheet electron beam with maximum current density of 57 A/cm² at the CW mode. Experimental results show that the developed BWO can operate in the fundamental mode TM₁₁ and generate the state-of-art output power of 182 mW at the frequency of 0.3426 THz with a large frequency tuning range from 0.318 THz to 0.359 THz.

The stability of the circuit and the tolerance during the manufacture process are theoretically studied in the design of 0.34 THz extended interaction klystron, which are helpful to increase the feasibility of the device. By using the small signal theory, the beam-loading conductance is studied to increase the efficiency of the beam-wave interaction. Combined with the study of start current for oscillation modes, the analysis of stability in multi-gap cavity is proposed, leading to the optimization of cavity. As a crucial factor affecting the ultimate performance of device, the inaccuracy during the fabrication process is researched. The acceptable tolerance is summarized through discussion of various geometrical dimensions' influences on cavity's characteristics. The study of power loss in the conductive wall is presented and the copper is believed to be adapted in making the device practicable with low attenuation. The physical design is simulated and verified by the particle-in-cell (PIC) method, and the results show that the output power of 142 W can be reached steadily at the frequency of 347.7 GHz, approaching the gain of 37.9 dB.

To overcome the shortcomings of the traditional staircased particle-in-cell (PIC) method, this paper presents the conformal PIC method to simulate the system-generated electromagnetic pulse (SGEMP) produced by the X-ray beam. One advantage of this method is to accurately simulate the electromagnetic response from the boundary of the object, and more importantly, it can be used to simulate the emission direction of the electrons accurately by properly handling the normal direction of the curved boundary. The numerical results show that the conformal PIC method can save much more computation time and memory than the staircased PIC technique to obtain the same accurate computational results.