Vero cells are considered as the most widely accepted continuous cell line by the regulatory authorities (such as WHO) for the manufacture of viral vaccines for human use. The growth of Vero cells is anchorage-dependent. Scale-up and manufacturing in adherent cultures are labor intensive and complicated. Adaptation of Vero cells to grow in suspension will simplify subcultivation and process scale-up significantly, and therefore reduce the production cost. Here we report on a successful adaptation of adherent Vero cells to grow in suspension in a serum-free and animal component-free medium (IHM03) developed in-house. The suspension adapted Vero cell cultures in IHM03 grew to similar or better maximum cell density as what was observed for the adherent Vero cells grown in commercial serum-free media and with a cell doubling time of 40-44 h. Much higher cell density (8 × 106 cells/mL) was achieved in a batch culture when three volume of the culture medium was replaced during the batch culture process. Both adherent and suspension Vero cells from various stages were tested for their authenticity using short tandem repeat analysis. Testing result indicates that all Vero cell samples had 100% concordance with the Vero DNA control sample, indicating the suspension cells maintained their genetic stability. Furthermore, suspension Vero cells at a passage number of 163 were assayed for tumorigenicity, and were not found to be tumorigenic. The viral productivity of suspension Vero cells was evaluated by using vesicular stomatitis virus (VSV) as a model. The suspension cell culture showed a better productivity of VSV than the adherent Vero cell culture. In addition, the suspension culture could be infected at higher cell densities, thus improving the volumetric virus productivity. More than one log of increase in the VSV productivity was achieved in a 3L bioreactor perfusion culture infected at a cell density of 6.8 × 106 cells/mL.
The growing interest in the use of lentiviral vectors (LVs) for various applications has created a strong demand for large quantities of vectors. To meet the increased demand, we developed a high cell density culture process for production of LV using stable producer clones generated from HEK293 cells, and improved volumetric LV productivity by up to fivefold, reaching a high titer of 8.2 × 107TU/mL. However, culture media selection and feeding strategy development were not straightforward. The stable producer clone either did not grow or grow to lower cell density in majority of six commercial HEK293 media selected from four manufacturers, although its parental cell line, HEK293 cell, grows robustly in these media. In addition, the LV productivity was only improved up to 53% by increasing cell density from 1 × 106and 3.8 × 106cells/mL at induction in batch cultures using two identified top performance media, even these two media supported the clone growth to 5.7 × 106and 8.1 × 106cells/mL, respectively. A combination of media and feed from different companies was required to provide diverse nutrients and generate synergetic effect, which supported the clone growing to a higher cell density of 11 × 106cells/mL and also increasing LV productivity by up to fivefold. This study illustrates that culture media selection and feeding strategy development for a new clone or cell line can be a complex process, due to variable nutritional requirements of a new clone. A combination of diversified culture media and feed provides a broader nutrients and could be used as one fast approach to dramatically improve process performance.
Adenoviruses are efficient and safe vectors for delivering target antigens and adenovirus-based vaccines have been used against a wide variety of pathogens, including tuberculosis and COVID-19. Cost-effective and scalable biomanufacturing processes are critical for the commercialization of adenovirus-vectored vaccines. Adenoviral vectors are commonly produced through the infection of batch cultures at low cell density cultures, mostly because infections at high cell densities result in reduced cell-specific virus productivity and does not improve volumetric productivity. In this study, we have investigated the feasibility of improving the volumetric productivity by infecting fed-batch cultures at high cell densities. Four commercial and one in-house developed serum-free media were first tested for supporting growth of HEK 293 cells and production of adenovirus type 5 (Ad5) in batch culture. Two best media were then selected for development of fed-batch culture to improve cell growth and virus productivity. A maximum viable cell density up to 16 × 106 cells/mL was achieved in shake flask fed-batch cultures using the selected media and commercial or in-house developed feeds. The volumetric virus productivity was improved by up to six folds, reaching 3.0 × 1010 total viral particles/mL in the fed-batch culture cultivated with the media and feeds developed in house and infected at a cell density of 5 × 106 cells/mL. Additional rounds of optimization of media and feed were required to maintain the improved titer when the fed-batch culture was scaled up in a bench scale (3 L) bioreactor. Overall, the results suggested that fed-batch culture is a simple and feasible process to significantly improve the volumetric productivity of Ad5 through optimization and balance of nutrients in culture media and feeds.