Terahertz (THz) waves have revealed a great potential for use in various fields and for a wide range of challenging applications. High‐performance detectors are, however, vital for exploitation of THz technology. Graphene plasmonic THz detectors have proven to be promising optoelectronic devices, but improving their performance is still necessary. In this work, an asymmetric‐dual‐grating‐gate graphene‐terahertz‐field‐effect‐transistor with a graphite back‐gate was fabricated and characterized under illumination of 0.3 THz radiation in the temperature range from 4.5 K up to the room temperature. The device was fabricated as a sub‐THz detector using a heterostructure of h‐BN/Graphene/h‐BN/Graphite to make a transistor with a double asymmetric‐grating‐top‐gate and a continuous graphite back‐gate. By biasing the metallic top‐gates and the graphite back‐gate, abrupt
n
+
n
(or
p
+
p
) or np (or pn ) junctions with different potential barriers are formed along the graphene layer leading to enhancement of the THz rectified signal by about an order of magnitude. The plasmonic rectification for graphene containing np junctions is interpreted as due to the plasmonic electron‐hole ratchet mechanism, whereas, for graphene with
n
+
n
junctions, rectification is attributed to the differential plasmonic drag effect. This work shows a new way of responsivity enhancement and paves the way towards new record performances of graphene THz nano‐photodetectors.
A graphene-based field-effect-transistor with asymmetric dual-grating gates was fabricated and characterized under excitation of terahertz radiation at two frequencies: 0.15 THz and 0.3 THz. The graphene sheet was encapsulated between two flakes of h-BN and placed on a highly doped SiO2/Si substrate. An asymmetric dual-grating gate was implemented on the h-BN top flake. Even though no antenna was used to couple the incoming radiation, a clear gate-bias-dependent photocurrent was measured under excitation at 0.3 THz up to room temperature. We subsequently demonstrated that the device can be used for terahertz sensing and inspection of hidden metallic objects at room temperature.
In this work we present results concerning the fundamental equations of charge-carrier transport in semiconductor structures. We discuss a correct modeling of the recombination terms that does not violate the charge conservation law. We obtained that under stationary conditions and equal generation rates of electrons and holes the recombination rates of both kinds of carriers must be matched. Under low excitation conditions (linear regime) the recombination rate can be expressed as a linear combination of the excess concentrations of electrons and holes, and only in very precise situations can a lifetime be defined. Explicit calculation of the charge variation was carried out within the framework of the band-to-band and Shockley-Read-Hall statistics. It is shown that the bulk space charge established on distances of the order of Debye’s length cannot influence the current-voltage characteristics of a device in a linear regime. It was also shown that metal- -type semiconductor contacts are essentially different from those made on -type semiconductors. The former should be considered as having a bipolar semiconductor structure and recombination cannot be neglected. The boundary conditions for the Poisson equation are presented.
A comprehensive study of the mechanisms of heating and cooling originated by an electrical current in semiconductor devices is reported. The authors studied the Peltier, Joule, and Thomson phenomena self-consistently and found that the magnitudes of all of them were commensurable. A new formulation and interpretation of the Thomson effect are offered. The main conclusion of the present work is that the thermal analysis of any semiconductor device under real working conditions demands the inclusion of all heating and cooling mechanisms simultaneously.