Longwall chock support failures seriously restrain the safety and high-efficiency of mining of extra thick coal seams, as well as causing a great waste of coal resources. During longwall top-coal caving (LTCC), the influential effect of the properties and the movement regulation of top-coal on strata behavior cannot be ignored, since the top-coal is the medium through which the load of the overlying strata is transferred to the chock supports. Taking Datong coalfield as an example, the mechanism of a chock support failure in the LTCC face was investigated. Research findings indicated that the hard top-coal and insufficient chock support capacity were primary reasons for chock support failure accidents. On account of the field-measured results, a new method to determine support capacity was proposed, which fully took the impact of the top-coal strength into consideration. The calculation revealed that the required support capacity had exceeded the existing production maximum, at about 22,000 KN. Since it was unrealistic to simply increase chock support capacity, other approaches, according to the theoretical analysis, were proposed, such as lowering the integrity and strength of the top-coal, and upgrading its crushing effect to weaken the support load effectively during the weighting period, which reduces the likelihood of chock support accidents occurring. Based on this, hydraulic fracturing for hard top-coal and optimization of the caving process (chock supports raised up and down repeatedly by manual operation before moving forward) were presented. The proposed solutions were successfully applied in LTCC-west8101 for subsequent mining and achieved substantial benefits. The above research provides valuable references and ideas for the control of strata behavior to ensure safe and highly efficient mining in extremely thick and hard coal seams with the LTCC method.
Room-and-pillar mining is a commonly used mining method in previous practice in northwest China mining area. Due to priority selection of high-quality resources, coal mines in northwest China generally have to face upward mining above goaf. Thus, the stability of a floor coal pillar influenced by mining activities plays an essential role in upward mining above goaf. The results indicated that a floor coal pillar kept stable before coal excavation in the no. 6107 working face in the Yuanbaowan coal mine; however, the plastic zone in the floor coal pillar expanded sharply and the elastic core zone reduced suddenly on the influence of abutment pressure. Finally, the floor coal pillar supported failure. Accordingly, the paper proposed a floor coal pillar reinforcing technique through a grout injection filling goaf area. As physically limited by a different-height filling body on the double sides, the plastic zone scope and horizontal displacement and loading capacity of the floor coal pillar were studied, working out that the critical height of the filling body should be about 6 m which can ensure safe mining when upward mining above goaf. Case practice indicated that the fractures induced by mining in the floor coal pillar, filling body, and floor can be restrained effectively when the filling body height is 6 m, which can ensure floor coal pillar stability and safe mining of the no. 6107 working face in the Yuanbaowan coal mine. The research can provide theoretical and technical guidance for upward mining above goaf and have a critical engineering practice value.
In this study, the thick, hard roof group of the 20103 working face in the Dahaize Coal Mine is used as the research object. UDEC discrete element simulations were conducted to examine fracture-induced energy release characteristics under unweakened conditions and single-layer hydraulic fracturing at different burial depths. This study clarifies the evolution of elastic strain energy accumulation and dissipation in thick, hard strata; reveals the post-fracturing energy migration mechanisms of different horizons; and establishes the correspondence between fracturing horizon and energy-weakening effectiveness. The results show the following: (1) Without fracturing, the energy accumulation within 0–30 m ahead of the face differs markedly among key strata. KS1 exhibits stable and relatively uniform elastic strain energy accumulation; KS2 shows a rapid increase at an advance distance of 180–300 m; and KS3, being farther from the coal seam, accumulates less energy than KS2. (2) After individually fracturing KS1, KS2, or KS3, the fractured layer loses its bearing and energy storage capacity, and the adjacent upper key stratum becomes the new load-bearing and energy accumulation layer. The reductions in elastic strain energy accumulation and release vary significantly by fracturing horizon: KS1 decreases by 10.70% and 11.63%, KS2 decreases by 18.73%, and KS3 decreases by 20.83% and 9.10%, respectively. Among the single-layer fracturing schemes, fracturing KS2 provides the most effective weakening of fracture-induced energy release in the mining-disturbed roof strata.