In this work, formamidine acetate (FAAc) was introduced in the two-step method to regulate perovskite crystallization and passivate defects, which resulted in achieving the PCE of device exceeding 24% with notable improvements in stability.
PTAA as a widely studied polymeric hole transporting material, has garnered significant attention due to its outstanding thermal and chemical stability. However, the performance of PTAA‐based p‐i‐n devices is shown to lag behind counterpart utilizing oxides or SAMs. In this study, the ionic liquid, 1‐ethyl‐3‐methylimidazolium formate (EMIMCOOH), is innovatively introduced into the lead iodide (PbI2) precursor solution, resulting in a more pronounced mesoporous PbI2 film with expended pore‐size and denser pores. This enhancement is attributed to the coordination bond between the ─C═O group in EMIMCOOH and Pb2+. This intensified mesoporous morphology not only facilities the reaction between PbI2 and the organic layer, but also promotes the PbI2 conversion into perovskite material. Importantly, the incorporation of EMIMCOOH slows down the perovskite conversion process, increasing perovskite domain size and suppressed Pb0 trap density, resulting in a uniform perovskite layer with enhanced charge transport properties, as evidenced by the conducting atomic force microscope (c‐AFM) results. As a result, the incorporation of EMIMCOOH yields a power conversion efficiency (PCE) of 24.10% and a high fill factor exceeding 85%. Notably, the PCE of the EMIMCOOH‐modified device can still maintain 86% of the initial value after 1500 h at 25 °C in an N2 atmosphere.
PSCs often use SnO2 as the ETL, issues like energy level mismatch, interface defects reduce efficiency. We found that adding K2S to SnO2 effectively adjusts energy levels and fills oxygen vacancies, improving electron mobility and interface quality.
Due to current issues of energy-level mismatch and low transport efficiency in commonly used electron transport layers (ETLs), such as TiO2 and SnO2, finding a more effective method to passivate the ETL and perovskite interface has become an urgent matter. In this work, we integrated a new material, the ionic liquid (IL) hexylammonium acetate (HAAc), into the SnO2/perovskite interface to improve performance via the improvement of perovskite quality formed by the two-step method. The IL anions fill oxygen vacancy defects in SnO2, while the IL cations interact chemically with Pb2+ within the perovskite structure, reducing defects and optimizing the morphology of the perovskite film such that the energy levels of the ETL and perovskite become better matched. Consequently, the decrease in non-radiative recombination promotes enhanced electron transport efficiency. Utilizing HAAc, we successfully regulated the morphology and defect states of the perovskite layer, resulting in devices surpassing 24% efficiency. This research breakthrough not only introduces a novel material but also propels the utilization of ILs in enhancing the performance of perovskite photovoltaic systems using two-step synthesis.