Supercapacitors have the unique advantages of high power density, fast charge and discharge rates, long cycle life, high safety, and reliability, and are increasingly being used for applications including automobiles, rail transit, communication equipment, digital electronics, and aerospace equipment. The supercapacitor industry is currently in a stage of rapid development; great breakthroughs have also been made in improving the performance of supercapacitors and the expansion of their application. Electrode technology is the core of supercapacitors. Transition-metal compounds have a relatively high theoretical capacity and have received widespread attention as electrode materials for supercapacitors. In addition, there is a synergistic effect between the different components of various electrode composite materials. Due to their superior electrochemical performance, supercapacitors are receiving increasing research attention. Flexible supercapacitors have been hailed for their good plasticity, resulting in a development boom. This review article mainly outlines the development process of various electrode materials, including carbon materials, conductive polymers, metal compounds, and composite materials, as well as flexible electrode materials based on carbon cloth.
Laser welding-brazing was used to join cemented carbide WC-Co and steel dissimilar materials. In this study, high-speed welding was adopted. The effect of welding parameters and brazing filler metals on the macrostructure, elemental diffusion, micro hardness and thermomechanical behavior was analyzed using optical metallography, scanning electron microscopy, electron probe micro-analysis, hardness test, and finite element method (FEM) based on thermo-elastic-plastic analysis. The experimental results show that increasing laser power is helpful to the increase of maximum welding speed. However, FEM also shows that increased welding speed leads to residual stress concentration, especial in the vicinity of jig. It is still a challenge to optimize laser power welding speed for a given brazing filler metal. The results show: when using pure copper, silver and nickel (thickness is less than 0.5 mm) as brazing filler metal, the combination, laser power of 1.2 kW and welding speed at 0.1 m/s, leads to complete penetration with good weld formation. However, when using Cu/Invar/Ni as brazing filler metal, laser power should increase to 1.7 kW if we still using a higher welding speed (0.1 m/s). Although a trial of high speed welding in laser welding-brazing exhibits feasibility, as-welded joints still have much more brittle risks due to the higher residual stresses.
High-precision positioning and multi-target detection have been proposed as key technologies for robotic path planning and obstacle avoidance. First, the Cartographer algorithm was used to generate high-quality maps. Then, the iterative nearest point (ICP) and the occupation probability algorithms were combined to scan and match the local point cloud, and the positions and attitudes of the robot were obtained. Furthermore, Sparse Matrix Pose Optimization was carried out to improve the positioning accuracy. The positioning accuracy of the robot in x and y directions was kept within 5 cm, the angle error was controlled within 2°, and the positioning time was reduced by 40%. An improved timing elastic band (TEB) algorithm was proposed to guide the robot to move safely and smoothly. A critical factor was introduced to adjust the distance between the waypoints and the obstacle, generating a safer trajectory, and increasing the constraint of acceleration and end speed; thus, smooth navigation of the robot to the target point was achieved. The experimental results showed that, in the case of multiple obstacles being present, the robot could choose the path with fewer obstacles, and the robot moved smoothly when facing turns and approaching the target point by reducing its overshoot. The proposed mapping, positioning, and improved TEB algorithms were effective for high-precision positioning and efficient multi-target detection.