As a heating method for RHCM (Rapid Heating Cycle Molding) various heating technologies such as high frequency induction heating, IR heating, gas heating, and high temperature steamare applied, but these methods are not satisfying high productivity due to low energy efficiency. Research has been actively conducted on RHCM based on planar heating elements with high heating efficiency, such as carbon nanotubes, which are applied. To apply the CNT web film to the RHCM, a heating element must be applied inside the injection mold and power must be applied. As electricity is directly applied to the CNT web film to generate heat, all mold parts in contact with the CNT web film must be insulated, and high heat transfer is required for rapid heating performance. Thus, in this study, a multi-layer structure mold module for insulation and high heat transfer was designed to enable rapid heating by applying a CNT web film as a heat source. To this end, we intend to present a research direction for the commercialization of rapid heating molds, by identifying the main variables of rapid heating through heating experiments by the mold metal and insulator materials, and reflecting them in the mold design.
Rapid heating of the mold surface is necessary for the high-gloss, high-productivity injection molding process. A rapid heating mold system that uses a carbon nanotube (CNT) as a heating element was investigated because of its structure. For CNT web film to be utilized in the injection molding process, heating must be applied inside the mold. That can cause poor contact at the contact area between the mold and the CNT heating element, leading to local temperature deviation and resistance changes that reduce the heating stability of the CNT surface element. Additionally, the multilayer structure of the CNT web film can cause heat-transfer performance variations due to the different layer thicknesses. To address these issues, an adjustable flush was constructed at the contact area between the electrode inside the mold and the insulator to analyze the heating behavior of the CNT heating element as a function of dimensional deviation. The thermal durability of the CNT web film was also evaluated by analyzing the Raman spectra and measuring resistance changes caused by local overheating. The film can withstand high temperatures, with a flush limit value of 0.3 . An optimization analysis was conducted to determine the ideal thicknesses of the multilayer CNT web film, insulator, and electrical insulator. Optimal layer thicknesses were found to be 10 , 5 , and 0.5 , respectively. The main variables of the rapid heating mold required for application to the injection process were identified and reflected in the mold design to suggest directions for commercialization.