This paper reviews the evolution of flow control methods for bladed linear cascades, focusing on passive techniques like riblets, grooves, vortex generators (VGs), and blade slots, which have proven effective in reducing drag, suppressing flow separation, and enhancing stability. The review outlines key historical developments that have improved flow efficiency and reduced losses in cascades. Bio-inspired designs, including riblets and grooves, help stabilize the boundary layer, reduce loss coefficients, and improve flow turning, which is vital for controlling drag and secondary flow effects. Vortex generators, fences, and slotted wingtips enhance stall margins and suppress corner separation, improving performance under off-design conditions. These methods are optimized based on aerodynamic parameters such as Reynolds number and boundary layer characteristics, offering substantial efficiency gains in high-performance compressors. Advancements in computational tools, like high-fidelity simulations and optimization techniques, have provided deeper insights into complex flow phenomena, including turbulence and vortex dynamics. Despite these advancements, challenges remain in fully optimizing these methods for diverse operating conditions and ensuring their practical application. This review highlights promising strategies for improving flow control efficiency and robustness, contributing to the design of next-generation turbomachinery.

This study presents a numerical approach to the design and optimization of centrifugal impellers used in the pumps of active thermal control systems of spacecraft. Although launch costs have shrunk in the last decade, the performance requirements, such as efficiency and reliability, have increased, as such systems are required to work up to 15 years, depending on the mission. To that effect, our paper deals with the first step in this pump design, namely the hydraulic optimization of the impeller. Constructively, this type of impeller allows for certain balancing systems and labyrinth seals to be applied in a more effective way, as well as allowing for additive manufacturing methods to be used—however, details regarding these aspects are beyond the scope of the current paper. By combining empirical formulas, computational fluid dynamics (CFD) analysis, and artificial neural networks (ANNs), the research focuses on achieving high efficiency and fast manufacturing. A series of geometries have been sized and validated using steady-state RANS (Reynolds Averaged Navier-Stokes) simulations, leading to the identification of the most efficient configuration. Subsequent optimization using an ANN resulted in a refined impeller design with notable improvements in hydraulic performance: a 3.55% increase in efficiency and a 7.9% increase in head. Key parameters influencing impeller performance, including blade number, incidence, and backsweep angles, are identified. This approach offers a comprehensive method to address the evolving requirements of space missions and contributes to the advancement of centrifugal pump technology in the space domain.

The design of diffusers is a critical aspect of compressor performance, directly influencing pressure recovery, flow stability, and overall stage efficiency and operating range. This review paper provides an analysis of diffuser design principles, methodologies, and practical considerations in turbomachinery applications. The importance of diffusers in compressors is discussed, and the main types of diffusers are presented, highlighting, for each type of diffuser, their aerodynamic characteristics and operational advantages. Traditional empirical correlations and analytical models for diffuser geometry generation are reviewed, emphasizing their role in guiding preliminary design decisions. The integration of one-dimensional (1D) performance analysis methods with computational fluid dynamics (CFD) simulations is also discussed, illustrating how these approaches improve performance prediction and optimization accuracy. Design constraints are analyzed alongside performance trade-offs, highlighting the need to balance efficiency and stability. Overall, this review synthesizes existing knowledge on diffuser design in compressors, providing a structured framework for engineers and researchers to understand the key factors affecting performance and guiding the development of efficient, reliable diffuser configurations for real-world turbomachinery applications.

This paper describes the effort of designing an unconventional exhaust manifold for a marine gas turbine engine, with an integrated passive ventilation port for cooling the engine housing. The study is part of a larger program to substitute the propulsion gas turbines for the T22R defense frigate and make the proper aerodynamic adaptations. The system in question is unique, in the sense that it uses the exhaust gas momentum to entrain outside air and ventilate the engine enclosure. In achieving this, RANS computation was used to test various concepts and dimensions for the ventilation system. Based on these analyses, the design that provided adequate air circulation with minimum pressure losses was chosen and the parts were integrated in the overall assembly. The experimental campaign performed on the entire aero-package showed good synergies of the ventilation system with the other adaptations and the engine itself. Performance was evaluated with pressure and temperature probes distributed around the aero-package and were found to be within 3.5% of the data predicted by CFD. This brings further studies closer to a technology readiness level vital for insitu testing on board the ship itself.

This research investigated a passive flow control technique to mitigate the adverse effects of shock wave–boundary layer interaction on a NACA 0012 airfoil. A perforated plate with a strategically positioned cavity beneath the shock wave anchoring spot was employed. Airfoils with perforated plates of varying orifice sizes (ranging from 0.5 to 1.2 mm) were constructed using various manufacturing techniques. Experimental analysis utilized an “Eiffel”-type open wind tunnel and a Z-type Schlieren system for flow visualization, along with static pressure measurements obtained from the bottom wall. Empirical observations were compared with steady 3D density-based numerical simulations conducted in Ansys FLUENT for comprehensive analysis and validation. The implementation of the perforated plate induced a significant alteration in shock structure, transforming it from a strong normal shock wave into a large lambda-type shock. The passive control case exhibited a 0.2% improvement in total pressure loss and attributed to the perforated plate’s capability to diminish the intensity of the shock wave anchored above. Significant fluctuations in shear stress were introduced by the perforated plate, with lower stress observed in the plate area due to flow detachment from cavity blowing. Balancing shock and viscous losses proved crucial for achieving a favorable outcome with this passive flow control method.

The current paper concerns the development of a very high pressure ratio single stage centrifugal compressor. Several research questions: assessing the design point of the impeller, behavior towards stall and surge as well as the turbulence model sensitivity under RANS assumptions. Three turbulence models, k-omega SST, Spalart Allmaras RC and Reynolds Stress Model, were assessed over the design speed line through a grid sensitivity test. All grids maintain the same first cell size, insuring a y+<1 and are fully conformal in order to minimize artificial entropy and interface reflections. Findings show that mesh convergence depends highly on the operating point, with increased density being needed close to choke. Near stall, the behavior depends significantly on the averaging method for the outlet parameters, particularly due to flow patterns emerging from the very shallow tangential streamlines. The paper sets the scene for more elaborate simulations such as DES or URANS helping make decisions on the meshing strategy and turbulence modeling for modern day centrifugal compressors.