Gas adsorption experiments are becoming one of the most common methods to quantify and analyze the pore structures of shale samples in the petroleum industry. In this regard, particle size of the specimen plays an important role in the results that could ultimately affect the pore structure interpretation. Hence, in this study, five shale samples at different thermal maturity levels are picked, and all are crushed into different groups of particle sizes: less than 40 mesh (375μm), less than 60 mesh (250μm), less than 80 mesh (187.5μm), and less than 100 mesh (150μm). Next, N₂ adsorption is used to characterize the pore structures of the samples within different particle sizes. Furthermore, to interpret the data, several attributes such as the pore volume, surface area, fractal dimension (from the fractal analysis), and heterogeneity index (from the multifractal analysis), are studied and compared between the samples and particle size intervals to provide us with the effect that particle size could have on the pore structure analysis. The results showed that as the particle size varies, the pore structures of the shale samples could get affected. Based on the comparison of the results, it is recommended that a suitable particle size for the shale pore structure characterization in N₂ adsorption experiments should be less than 60 mesh (250μm).

Tight oil is a great potential resource for unconventional oil exploration and development. Determining the content of adsorbed tight oil in sandstone reservoirs and the factors controlling its content is crucial for the evaluation and development of tight oil resources. Using fluorescence petrography, environmental scanning electron microscopy, porosity as well as permeability analyses, high-pressure mercury intrusion, and nuclear magnetic resonance imaging, the present study analyzed the occurrence form, location, and relative content of free and adsorbed tight oils and effect of controlling factors on the content of adsorbed tight oil in sandstone reservoirs of the Chang 8 member in the Huaqing area of the Ordos Basin. The free tight oil mainly exists in residual intergranular, intergranular dissolved, intragranular dissolved, and dissolution-enlarged pores as well as some throats in the form of flakes with various areas and slender strips. The adsorbed tight oil mainly occurs on the surfaces of the mineral particles and mica fragments as well as in fractures, some throats or the intragranular as well as intergranular dissolved pores in the form of films with variable thicknesses and long strips. The lower limit of the pore radius at which free tight oil occurs in sandstone is approximately 0.1 μm and the adsorbed tight oil occurs on the surface of mineral particles and in spaces with pore radii of 0.02–0.3 μm. The contribution of free tight oil to total tight oil in the present study has highest and lowest content of 60.95% and 32.48%, respectively, with an average content of 50.14%. The contribution of adsorbed tight oil to total tight oil has highest and lowest content of 67.52% and 39.05%, respectively, with an average content of 49.86%. The content of adsorbed tight oil is generally proportional to the median pressure and inversely proportional to the porosity as well as permeability of the reservoir; particularly, porosity is relevant. The content of adsorbed tight oil is inversely proportional to the quartz content and directly proportional to the feldspar, carbonate cement, and clay mineral content of the sandstone.

This study delves into the micro-occurrence states and enrichment mechanisms of residual oil, pivotal for advancing the production from tight sandstone reservoirs, particularly from the Chang 8 Member of the Upper Triassic Yanchang Formation, Ordos Basin. Through an analysis of 23 core samples, employing high-pressure mercury injection, field emission scanning electron microscopy, thin section, and X-ray diffraction techniques, distinct reservoir types were categorized. The utilization of environmental scanning electron microscope, multi-solvent continuous extraction, and an oil components separation system facilitated an intricate analysis of residual oil micro-occurrence states and their subsequent effects on porosity and permeability reduction across varying reservoir types. The findings accentuate the integral role of reservoir type in determining residual oil distribution within tight sandstone reservoirs. Favorable pore throat sorting and connectivity in specified reservoir types are identified as conducive to residual oil enrichment with a higher concentration of light components. In contrast, elevated carbonatite and clay content in other reservoir types leads to adsorption of heavy components, disrupting pore throat connectivity, and impeding crude oil filling. The varied interactions between oil and rock, oil–oil, and pore throat sealing significantly impact the distribution of oil components of residual oil, culminating in a notable reduction of porosity and permeability by 2.63% and 0.197 mD, with corresponding reduction rates of 27.19% and 46.69%, respectively. The insights derived from this study furnish a theoretical foundation for augmenting tight oil recovery and comprehending the enrichment mechanism of residual oil driven by the heterogeneity of tight sandstone reservoirs.

Authigenic chlorite, which is frequently found in sandstone, has a controlling effect on the reservoirs in which tight oil is adsorbed during hydrocarbon filling. In this study, the content, occurrence state, timing, mechanism and influence of authigenic chlorite on the micro-occurrence states of tight oil were studied using Thin Section (TS), Fluorescent Thin Section (FTS), X-Ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM), Environmental Scanning Electron Microscopy (ESEM), and Energy Dispersive Spectroscopy (EDS). The results indicate: (1) a spatial coupling between chlorite development, a brackish water delta front facies depositional environment, and biotite-rich arkosic sandstone. (2) Authigenic chlorite can be divided into three types: grain-coating chlorite, pore-lining chlorite, and rosette chlorite. Chlorite forms after early compaction but before other diagenetic phases, and grows via precipitation from pore waters that contain products released during the dissolution of volcanic rock fragments and biotites. Porewater is also pressure-released from feldspars and mudstone. (3) The micro-occurrence states of tight oil can be divided into five types: emulsion form, cluster form, throat form, thin-film form, and the isolated or agglomerated particle form. (4) During hydrocarbon filling, tight oil mainly occurs on the surface of grain-coating and pore-lining chlorite in the form of a thin film, the granular or agglomerated forms are mainly enriched within the intercrystalline pores within the authigenic chlorite, and the cluster forms are mainly enriched in dissolution pores. Isolated or agglomerated particles of tight oil primarily occur in the intercrystalline pores of the rosette chlorite. (5) The specific surface area and the authigenic chlorite’s adsorption potential of authigenic chlorite control the micro-occurrence of tight oil on the surface of the chlorite and in intercrystalline pores. The adsorption capacity of chlorite lies in the following order: pore-lining chlorite intercrystalline pores > rosette chlorite > chlorite in feldspar dissolution pores > pore-lining chlorite surface > grain-coating chlorite intercrystalline pores > grain-coating chlorite surface.

The adsorption of crude oil in the tight sandstone reservoir is significant. Occurrence states of adsorbed tight oil and its pore and throat reduction effect are two significant directions in tight oil exploration and development. In this paper, the occurrence state of adsorbed tight oil and its porosity and permeability reduction effect is systematically analyzed based on a detailed description and discussion of occurrence space, states, changes of porosity and permeability, and its controlling factors. Five occurrence states are recognized based on the differences in spatial location and morphology of adsorbed tight oil. Adsorbed oil is distributed in all kinds of reservoir spaces and primarily concentrated in the μm. The distribution characteristics of reservoir spaces control the occurrence states of adsorbed tight oil. The emulsion form, cluster form, throat form, thin film form, and isolation form are mainly stored in intergranular pores, feldspar dissolved pores, throats, the surface of minerals, and intercrystalline pores, respectively. The massive development of quartz, feldspar, and illite is conducive to the distribution of emulsion form, cluster form, and the throat form of tight oil, while the abundance of clay, especially chlorite, controls the distribution of the thin film form and isolated form of tight oil. The adsorption of tight oil causes clogging in the pore network, resulting in reservoir damage. The adsorption of tight oil in the reservoir leads to increased reservoir density by 0.290 g/cm³ and the reduction of porosity and permeability by 3.14% and μm², respectively. And the damage of adsorbed oil to permeability (30.79%) is more severe than that of porosity (19.96%). The effect of pore and throat reduction is more evident in reservoirs with higher content of quartz and feldspar. However, the strong adsorption of clay makes it difficult to separate the tight oil adsorbed on its surface. The nature of adsorbed oil in different occurrence states also can determine the separation efficiency in the extraction process. The adsorbed tight oil with emulsion, cluster, and throat forms is easier to desorb than the isolation and thin film forms. The research results can provide a basis for analyzing the occurrence characteristics and reasonably formulating the development method of tight oil. In addition, it can even provide a new understanding and basis for the densification process of reservoir permeability under different conditions.