Shi-qiang Lu

Shi-qiang Lu


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 October 2016 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
YWYachao Wang
Yachao Wang
Jing ShiJing Shi
Jing Shi
SLShi-qiang Lu
Shi-qiang Lu
YWYun Wang
Yun Wang
Graphene nanoplatelets (GNPs) have many outstanding properties, such as high mechanical strengths, light weight, and high electric conductivity. These unique properties make it an ideal reinforcement used for metal matrix composites (MMCs). In the past few years, many studies have been performed to incorporate GNPs into metal matrix and investigate the properties of obtained metal matrix composites. Meanwhile, fabrication of MMCs through laser-assisted additive manufacturing (LAAM) has attracted much attention in recent years due to the advantages of low waste, high precision, short production lead time, and high workpiece complexity capability. In this study, the two attractive features are combined to produce GNPs reinforced MMC using selective laser melting (SLM) process, one of the LAAM processes. The target metal matrix material is Inconel 718, a nickel-based Ni–Cr–Fe austenitic superalloy that possesses excellent workability and mechanical performance, and has wide applications in industries. In the experiment, pure Inconel 718 and GNPs reinforced Inconel 718 composites with two levels of GNPs content (i.e., 0.25 and 1 wt. %) are obtained by SLM. Note that before the SLM process, a novel powder mixture procedure is employed to ensure the even dispersion of GNPs in the Inconel 718 powders. Room temperature tensile tests are conducted to evaluate the tensile properties. Scanning electron microscopy (SEM) observations are conducted to analyze the fracture surface of materials and to understand the reinforcing mechanism. It is found that fabrication of GNPs reinforced MMC using SLM is a viable approach. The obtained composite possesses dense microstructure and significantly enhanced tensile strength. The ultimate tensile strengths (UTSs) are 997.8, 1296.3, and 1511.6 MPa, and the Young's moduli are 475, 536, and 675 GPa, for 0 wt. % (pure Inconel 718), 0.25 wt. %, and 1 wt. % GNP additions, respectively. The bonding between GNPs and matrix material appears to be strong, and GNPs could be retained during the SLM process. The strengthening effect and mechanisms involved in the composites are discussed. Load transfer, thermal expansion coefficient mismatch, and dislocation hindering are believed to be the three main reinforcing mechanisms involved. It should be noted that more work needs to be conducted in the future to obtain more comprehensive information regarding other static and dynamic properties and the high-temperature performances of the GNP-reinforced MMCs produced by SLM. Process parameter optimization should also be investigated.

21 October 2013 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
JFJun Fang
Jun Fang
SLShi-qiang Lu
Shi-qiang Lu
KWKelu Wang
Kelu Wang
JXJianmei Xu
Jianmei Xu
XXXiaomei Xu
Xiaomei Xu
ZYZhengjun Yao
Zhengjun Yao
The tube numerical control (NC) bending process is a much complex physical process with multifactors coupling interactive effects. The mandrel is the key to improve forming quality and to enhance forming limit. In this study, based on the platform of ABAQUS/Explicit, a 3D elastic-plastic finite element model of NC bending process of 2169 (0Cr21Ni6Mn9N) stainless steel tube was established, key technological problems were solved, and its reliability was validated. Then, simulation and analysis of the processes were carried out, and the influence laws of mandrel types and mandrel parameters on cross-section quality were obtained. The results show that the wall thinning or cross section deformation is serious at the middle part and small in the vicinity of the bending plane or initial bending plane; the wall thinning degree increases or the cross section deformation degree decreases with the increase of mandrel diameter or mandrel extension length; the effect of bulb mandrel on the cross section quality is more significant than that of cylinder mandrel. And the reasonable mandrel types and mandrel parameters are chosen for the 2169 high-pressure hydraulic tube with small diameter. The results may lead to better understanding of mandrel role in the improvement of forming quality and forming limit in the NC bending process.

1 August 2013 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
XLXin Li
Xin Li
SLShi-qiang Lu
Shi-qiang Lu
KWKelu Wang
Kelu Wang
Mingwang FuMingwang Fu
Mingwang Fu
CCChunxiao Cao
Chunxiao Cao

6 August 2015 in Journal of Central South University
Verified
Journal Article
Closed access
PDF file
JFJun Fang
Jun Fang
SLShi-qiang Lu
Shi-qiang Lu
KWKe-Lu Wang
Ke-Lu Wang
ZYZheng-Jun Yao
Zheng-Jun Yao

18 June 2015 in Metals and Materials International
Verified
Journal Article
Closed access
PDF file
XSXiaoyong Shu
Xiaoyong Shu
SLShi-qiang Lu
Shi-qiang Lu
KWKelu Wang
Kelu Wang
GLGuifa Li
Guifa Li

31 December 2010 in Transactions of Nonferrous Metals Society of China
Verified
Journal Article
Closed access
XDXian-Juan Dong
Xian-Juan Dong
SLShi-qiang Lu
Shi-qiang Lu
HZHai-Zhong Zheng
Hai-Zhong Zheng
XLXin Li
Xin Li
DODe-Lai Ouyang
De-Lai Ouyang