A two-dimensional numerical model predicting supercritical flow in open channels has been developed using the finite volume method. The shallow-water equations are solved by the total variation diminishing weighted average flux method. Then the model is applied to a wide range of supercritical flow tests in rectangular chute bends and the results are compared with available experimental data. The results indicate that the model predicts the flow profile well for the channel bend with a width to channel curvature ratio of 0.04 and the present model has limitations for the other tests which have a higher ratio.
23 July 2021 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
Purpose: This paper aims to present a novel numerical technique for solving the incompressible multiphase mixture model. Design/methodology/approach: The multiphase mixture model contains a set of momentum and continuity equations for the mixture phase, a second phase continuity equation and the algebraic equation for the relative velocity. For solving continuity equation for the second phase and advection term of momentum, an improved approach fine grid advection-multiphase mixture flow (FGA-MMF) is developed. In the FGA-MMF method, the continuity equation for the second phase is solved with higher-order schemes in a two times finer grid. To solve the advection term of the momentum equation, the advection fluxes of the volume fraction in the continuity equation for the second phase are used. Findings: This approach has been used in various tests to simulate unsteady flow problems. Comparison between numerical results and experimental data demonstrates a satisfactory performance. Numerical examples show that this approach increases the accuracy and stability of the solution and decreases non-monotonic results. Research limitations/implications: The solver for the multi-phase mixture model can only be adopted to solve the incompressible fluid flow. Originality/value: The paper developed an innovative solution (FGA-MMF) to find multi-phase flow field value in the multi-phase mixture model. Advantages of the FGA-MMF technique are the ability to accurately determine the phases interpenetrating, decreasing the numerical diffusion of the interface and preventing instability and non-monotonicity in solution of large density variation problems.