Digital, practical, user-friendly tools generate actionable insights for the food industry to develop effective food waste reduction strategies. This study aimed to develop a methodology behind a digital food waste estimator that may be used to calculate the potential food waste reduction and the environmental and nutritional reach impact by extending the shelf life of foods. The methodology for this tool incorporates a straightforward algorithm and robust data sources. Additionally, two case studies were analyzed and discussed to demonstrate the tool’s application and effectiveness. The results from the food waste estimator revealed that by increasing the shelf life of poultry meat by 40%, waste could be reduced by 6–7%, CO2 emission by 457–567 kg, and water usage by 656,571–814,149 L/1000 kg of product. Meanwhile, by increasing the shelf life of bread by 20%, waste can be reduced by 5–6%, CO2 emission by 155–192 kg, and water usage by 248,000–307,520 L/1000 kg of product. This study demonstrated that the fundamental mathematical approach to and assumptions behind the food waste estimator can be effectively used to determine the potential for food waste reduction and environmental impact by extending a product’s shelf life. Extending the shelf life of food may reduce environmental impact and food waste.
Satsuma mandarins are good sources of vitamin C and can be used as raw materials to produce novel plant-based food ingredients including satsuma mandarin juice powders (SJP). Food powders produced via spray drying often show thermal degradation due to the drying conditions and high drying air temperatures. The aim of this study was to evaluate the effect of using different spray drying configurations, including concurrent (CC), mixed flow (MX), and combined (CC + MX), at two inlet air temperatures (160 and 180 °C) on the physicochemical properties of SJP. Remarkably, SJP produced using the CC spray drying configuration exhibited a higher vitamin C content (3.56–4.01 mg/g) and lower moisture levels (15.18–16.35 g/100 g) than powders produced via MX or CC + MX. The vitamin C content of MX and CC + MX powders ranged from 2.88 to 3.33 mg/g. Meanwhile, all SJP had water activity values below 0.19. Furthermore, MX powders displayed the largest mean particle sizes (D50) (8.69–8.83 µm), higher agglomeration, and a rapid dissolution. Despite these differences, all SJP variants exhibited consistent color, surface area, and pore volumes. Notably, powders dried at higher inlet air temperatures (180 °C) showed less vitamin C content and increased thermal damage when compared with powders dried at 160 °C inlet air temperature. This study demonstrated the feasibility of producing high-quality SJP with an extended shelf life. SJP can be used as a novel plant-based ingredient in different food applications.