This work develops a material reconstruction method for spectral CT, namely Total Image Constrained Material Reconstruction (TICMR), to maximize the utility of projection data in terms of both spectral information and high signal-to-noise ratio (SNR). This is motivated by the following fact: when viewed as a spectrally-integrated measurement, the projection data can be used to reconstruct a total image without spectral information, which however has a relatively high SNR; when viewed as a spectrally-resolved measurement, the projection data can be utilized to reconstruct the material composition, which however has a relatively low SNR. The material reconstruction synergizes material decomposition and image reconstruction, i.e., the direct reconstruction of material compositions instead of a two-step procedure that first reconstructs images and then decomposes images. For material reconstruction with high SNR, we propose TICMR with nonlocal total variation (NLTV) regularization. That is, first we reconstruct a total image using spectrally-integrated measurement without spectral binning, and build the NLTV weights from this image that characterize nonlocal image features; then the NLTV weights are incorporated into a NLTV-based iterative material reconstruction scheme using spectrally-binned projection data, so that these weights serve as a high-SNR reference to regularize material reconstruction. Note that the nonlocal property of NLTV is essential for material reconstruction, since material compositions may have significant local intensity variations although their structural information is often similar. In terms of solution algorithm, TICMR is formulated as an iterative reconstruction method with the NLTV regularization, in which the nonlocal divergence is utilized based on the adjoint relationship. The alternating direction method of multipliers is developed to solve this sparsity optimization problem. The proposed TICMR method was validated using both simulated and experimental data. In comparison with FBP and total-variation-based iterative method, TICMR had improved image quality, e.g., contrast-to-noise ratio and spatial resolution.
The goal of radiation therapy is to deliver tumoricidal dose to clinical target volume (CTV) while sparing organs-at-risk (OAR). We hypothesize that the joint use of proton and photon radiation therapy via appropriate hybrid proton-photon inverse planning method will be more favorable than proton or photon therapy alone, in terms of optimized combination of CTV coverage and OAR sparing. This work develops hybrid proton-photon inverse optimization method that simultaneously optimizes proton and photon variables. To account for delivery uncertainty, proton dose is targeted at CTV using robust optimization, and photon dose is targeted at either CTV using robust optimization or planning target volume (PTV) using the same setup shifts. The optimization objectives enforce OAR sparing and uniform CTV coverage for the total dose, while imposing uniform-dose regularization at targets for both the proton and photon component in order for both components to be individually deliverable. The hybrid problem with dose-volume-histogram (DVH) constraints is nonconvex and solved by iterative convex relaxations of DVH constraints and alternating direction method of multipliers (ADMM). Preliminary results suggest the hybrid proton-photon planning potentially improves proton or photon planning in terms of optimized combination of CTV coverage and OAR sparing.
For the treatment planning during intensity modulated radiation therapy (IMRT) or volumetric modulated arc therapy (VMAT), beam fluence maps can be first optimized via fluence map optimization (FMO) under the given dose prescriptions and constraints to conformally deliver the radiation dose to the targets while sparing the organs-at-risk, and then segmented into deliverable MLC apertures via leaf or arc sequencing algorithms. This work is to develop an efficient algorithm for FMO based on alternating direction method of multipliers (ADMM). Here we consider FMO with the least-square cost function and non-negative fluence constraints, and its solution algorithm is based on ADMM, which is efficient and simple-to-implement. In addition, an empirical method for optimizing the ADMM parameter is developed to improve the robustness of the ADMM algorithm. The ADMM based FMO solver was benchmarked with the quadratic programming method based on the interior-point (IP) method using the CORT dataset. The comparison results suggested the ADMM solver had a similar plan quality with slightly smaller total objective function value than IP. A simple-to-implement ADMM based FMO solver with empirical parameter optimization is proposed for IMRT or VMAT.
Low-dose x-ray computed tomography (LDCT) is desirable for reduced patient dose. This work develops new image reconstruction methods with deep learning (DL) regularization for LDCT. Our methods are based on the unrolling of a proximal forward–backward splitting (PFBS) framework with data-driven image regularization via deep neural networks. In contrast to PFBS-IR, which utilizes standard data fidelity updates via an iterative reconstruction (IR) method, PFBS-AIR involves preconditioned data fidelity updates that fuse the analytical reconstruction (AR) and IR methods in a synergistic way, i.e. fused analytical and iterative reconstruction (AIR). The results suggest that the DL-regularized methods (PFBS-IR and PFBS-AIR) provide better reconstruction quality compared to conventional methods (AR or IR). In addition, owing to the AIR, PFBS-AIR noticeably outperformed PFBS-IR and another DL-based postprocessing method, FBPConvNet.