Corrosion inhibitors are one of the best practices to prevent the far-reaching negative impacts of corrosion on ferrous alloys. A thorough understanding of their corrosion-inhibiting effects is essential for a sustainable economy and environment. Anionic surfactants are known to act efficiently as corrosion inhibitors. Here, we present that in-situ atomic force microscopy (AFM) measurements can provide deep insights into the adsorption and inhibition mechanism of surfactants on stainless steel surfaces during local corrosion. These include the configuration of surfactant molecules on the surface and how the microstructure of the stainless steel surface influences the inhibition process. Three different anionic surfactants, namely palm kernel oil (PKO), linear alkylbenzene sulfonate (LAS), and fatty alcohol ether sulfate (FAES), were investigated on a titanium-stabilized ferritic stainless steel (1.4510) in NaCl solution. For PKO, the results show random adsorption of bi- and multilayer whereas LAS and FAES adsorb only as local corrosion occurs. Thereby, LAS accumulates only locally and especially at the titanium precipitates of the 1.4510 and FAES forms a densely packed monolayer on the surface. This leads to better corrosion inhibiting properties for LAS and FAES compared to PKO.
Over the past decades, the importance of lightweight structures in the aircraft and automotive industries has steadily increased due to regulations aimed at reducing global warming. Work hardened steel alloys are commonly used for lightweight applications, but they face stability issues when the material thickness reaches certain thresholds. Fiber Reinforced Plastics (FRP) offer a viable alternative due to their high strength-to-weight ratio, but they are often expensive due to long production cycles and high material costs. A feasible solution lies in hybrid lightweight designs that utilize expensive FRP materials only in highly stressed areas, achieving a balance between low mass and acceptable cost. These hybrid structures are lighter than metal components and more cost-effective compared to fully FRP structures, without compromising mechanical properties. This study focuses on producing rotationally symmetrical hybrid structures using Resin Transfer Molding (RTM) combined with vacuum assistance in a single-stage process. The research examines the effects of injection pressure, mold temperature, and the interface between metal and FRP. The mechanical characterization of these hybrid structures was conducted to assess their performance under torsion, compression, and interlaminar shear strength (ILSS) loading conditions. The results indicate that hybrid designs can offer a lightweight alternative without compromising mechanical properties.