Elastic impedance (EI) inversion for partial angle stack seismic data is a key technology in seismic reservoir prediction within the oil and gas industry. EI inversion provides a consistent framework to invert partial angle stack seismic data, just as the AI inversion does for post-stack data. The commonly used EI inversion process is angle by angle. Hence, the inverted EI for different angles may be nonconforming, especially for the seismic data with a low signal-to-noise ratio. This paper proposes to simultaneously invert multiple partial angle stack seismic data to obtain EI for different angles at once. To obtain conformable EI, we used the joint sparse constraint on the reflection coefficients for different angles. Then, the objective function for simultaneous EI inversion was constructed. Next, synthetic seismic data profiles with three different angles were used to show the superiority of the proposed EI inversion method compared to the conventional method. At last, a real seismic data line was used to test the feasibility of the proposed method in practice. The inversion results of synthetic data and real data showed that it provides an effective new alternative method to estimate EI from partial stack seismic data.

In exploration geophysics, seismic impedance is a physical characteristic parameter of underground formations. It can mark rock characteristics and help stratigraphic analysis. Hence, seismic data inversion for impedance is a key technology in oil and gas reservoir prediction. To invert impedance from seismic data, one can perform reflectivity series inversion first. Then, under a simple exponential integration transformation, the inverted reflectivity series can give the final inverted impedance. The quality of the inverted reflectivity series directly affects the quality of impedance. Sparse-spike inversion is the most common method to obtain reflectivity series with high resolution. It adopts a sparse regularization to impose sparsity on the inverted reflectivity series. However, the high resolution of sparse-spike-like reflectivity series is obtained at the cost of sacrificing small reflectivity. This is the inherent problem of sparse regularization. In fact, the reflectivity series from the actual impedance well log is not strictly sparse. It contains not only the sparse major large reflectivity, but also small reflectivity between major reflectivity. That is to say, the large reflectivity is sparse, but the small reflectivity is dense. To combat this issue, we adopt elastic-net regularization to replace sparse regularization in seismic impedance inversion. The elastic net is a hybrid regularization that combines sparse regularization and dense regularization. The proposed inversion method was performed on a synthetic seismic trace, which is created from an actual well log. Then, a real seismic data profile was used to test the practice application. The inversion results showed that it provides an effective new alternative method to invert impedance.