To meet current economic demands enforcing the replacement of platinum-group metals, extensively used in three-way-catalytic converters (TWC), research is driven towards low-cost and widely available base metals. However, to cope with their lower activity, high metal loadings must be coupled with increased dispersion. Herein, a series of CuO/Al₂O₃ samples is produced and the effect of different alumina supports’ properties on CuO dispersion, speciation and eventually on the TWC performance is studied. The alumina samples are synthesized via different methods, including soft-templating routes and flame spray pyrolysis, and compared with a commercial one, while CuO used as the catalytic active phase is added through ammonia-driven deposition–precipitation. As found, the large surface area and low crystallinity of the aluminas produced by soft-templating routes favor strong metal–support interaction, generating highly dispersed and strongly bonded CuO species at low loading and copper-aluminate phases at high loading. Notably, the use of amorphous mesoporous alumina completely prevents the formation of crystalline CuO even at 15 wt% Cu. Such high metal loading and dispersion capacity without the application of elevated calcination temperatures is one of the best reported for nonreducible supports. Catalytic evaluation of this material reveals a pronounced enhancement of oxidation activity with metal loading increase.

Oxidized multi-walled carbon nanotubes (oxCNTs) were functionalized by a simple non-covalent modification procedure using quaternized hyperbranched poly(ethyleneimine) derivatives (QPEIs), with various quaternization degrees. Structural characterization of these hybrids using a variety of techniques, revealed the successful and homogenous anchoring of QPEIs on the oxCNTs’ surface. Moreover, these hybrids efficiently dispersed in aqueous media, forming dispersions with excellent aqueous stability for over 12 months. Their cytotoxicity effect was investigated on two types of gram(−) bacteria, an autotrophic (cyanobacterium Synechococcus sp. PCC 7942) and a heterotrophic (bacterium Escherichia coli). An enhanced, dose-dependent antibacterial and anti-cyanobacterial activity against both tested organisms was observed, increasing with the quaternization degree. Remarkably, in the photosynthetic bacteria it was shown that the hybrid materials affect their photosynthetic apparatus by selective inhibition of the Photosystem-I electron transport activity. Cytotoxicity studies on a human prostate carcinoma DU145 cell line and 3T3 mouse fibroblasts revealed that all hybrids exhibit high cytocompatibility in the concentration range, in which they also exhibit both high antibacterial and anti-cyanobacterial activity. Thus, QPEI-functionalized oxCNTs can be very attractive candidates as antibacterial and anti-cyanobacterial agents that can be used for potential applications in the disinfection industry, as well as for the control of harmful cyanobacterial blooms.

Copper containing silica nanostructures are easily produced through a low cost versatile approach by means of hyperbranched polyethyleneimine (PEI), a water soluble dendritic polymer. This dendritic molecule enables the formation of hybrid organic/inorganic silica nanoparticles in buffered aqueous media, at room temperature and neutral pH, through a biomimetic silicification process. Furthermore, the derived hybrid organic/inorganic materials dispersed in water can be easily loaded with various copper amounts, due to the presence of PEI, which, despite having been integrated in the silica network, retains its strong copper chelating ability. Following calcination, the obtained copper loaded nanopowders are characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), N₂ adsorption, Temperature programmed reduction (TPR) and UV-Vis diffuse reflectance (UV-Vis-DR) techniques and evaluated for automotive exhaust purification under simulated conditions at the stoichiometric point. Effective control over final materials’ pore structural and morphological characteristics is provided by employing different buffer solutions, i.e., tris(hydroxymethyl)aminomethane (Tris) or phosphate buffer. It was found that the enhancement of the nanopowders textural features, obtained in the presence of Tris buffer, had a great impact on the material’s catalytic behavior, improving significantly its activity towards pollutants oxidation.

Non-toxic carbon-based hybrid nanomaterials based on carbon nanodisks were synthesized and assessed as novel antibacterial agents. Specifically, acid-treated carbon nanodisks (oxCNDs), as a safe alternative material to graphene oxide, interacted through covalent and non-covalent bonding with guanidinylated hyperbranched polyethyleneimine derivatives (GPEI5K and GPEI25K), affording the oxCNDs@GPEI5K and oxCNDs@GPEI25K hybrids. Their physico-chemical characterization confirmed the successful and homogenous attachment of GPEIs on the surface of oxCNDs, which, due to the presence of guanidinium groups, offered them improved aqueous stability. Moreover, the antibacterial activity of oxCNDs@GPEIs was evaluated against Gram-negative E. coli and Gram-positive S. aureus bacteria. It was found that both hybrids exhibited enhanced antibacterial activity, with oxCNDs@GPEI5K being more active than oxCNDs@GPEI25K. Their MIC and MBC values were found to be much lower than those of oxCNDs, revealing that the GPEI attachment endowed the hybrids with enhanced antibacterial properties. These improved properties were attributed to the polycationic character of the oxCNDs@GPEIs, which enables effective interaction with the bacterial cytoplasmic membrane and cell walls, leading to cell envelope damage, and eventually cell lysis. Finally, oxCNDs@GPEIs showed minimal cytotoxicity on mammalian cells, indicating that these hybrid nanomaterials have great potential to be used as safe and efficient antibacterial agents.

Diseases caused by infection are a threat to human health and the world economy, with bacterial infections being responsible for a large portion of hospitalizations, morbidity, and mortality, which necessitates the quest for advanced medications and/or sustainable antibacterial strategies. This study aims to develop bioderived chitin nanofibers (ChNFs) and ZnO nanoparticles to produce non-toxic nanohybrid materials with improved aqueous stability and enhanced antibacterial properties. These nanohybrids were formed via either (i) an ex situ route by mixing the ChNFs with ZnO nanoparticles prepared by flame spray pyrolysis or (ii) an in situ route resulting in ZnO nanoparticles being formed and embedded into ChNFs by a simple aqueous hydrothermal process, utilizing a low-cost Zn inorganic precursor. The ChNFs, the ZnO nanoparticles, and the nanohybrids were physicochemically characterized for their size, morphology, charge and stability. Their antibacterial activity was evaluated against Gram (−) E. coli and Gram (+) S. aureus bacteria, while their cytocompatibility was assessed against mammalian cell lines. The obtained results reveal a balance between antibacterial activity and cytocompatibility, as both nanohybrids exhibited satisfactory antibacterial activity (MIC 200–300 μg/mL) combined with low cytotoxicity against mammalian cell lines (cell viability 80–100%), indicating that their further application as safe and effective antibacterial agents is promising.