A new strategy to improve the CO2 capture performance of solid amine sorbents has been developed based on the balance of CO2 kinetic diffusion and thermodynamic sorption. The CO2-neutral surfactant was introduced into polyethyleneimine (PEI) to create extra CO2 transfer pathways, facilitating CO2 diffusion into the deeper PEI films. Consequently, the sorbents offered increased amount of reactive sites and higher utilization efficiency of amine groups, leading to a dramatically enhanced CO2 dynamic capacity and total capacity. Due to the facilitating diffusion, the sorbents could work at room temperature with very good performance. At 30 °C the surfactant-promoted sorbents had the CO2 capture capacity as high as 142 mg g−1 and their amine utilization was over 50%, which are the highest values ever reported for the PEI loaded sorbents working at this temperature. The surfactant-promoted sorbents also exhibited much better sorption kinetics and regeneration performance. In addition to advancing the support or amine, the present study provides another cost-efficient and general approach to design high performance CO2 solid sorbents and may have a major impact on the advance of current carbon capture and storage technologies.
Developing durable acidic oxygen evolution reaction catalysts is critical for industrial proton exchange membrane water electrolyzers. We incorporate high-entropy atoms (Co, Ni, Cu, Mn, Sm) into RuO2 (RuO2-HEAE) via annealing, achieving remarkably high stability (>1500 h at 100 mA cm−2). In situ differential electrochemical mass spectrometry and operando Attenuated Total Reflection Surface-Enhanced Infrared Absorption Spectroscopy reveal RuO2-HEAE follows a dual-site oxide path mechanism instead of the conventional adsorbate evolution mechanism. Quantitative Fourier-transformed extended X-ray absorption fine structure fitting and density functional theory calculations show this mechanistic shift stems from an elongated Ru-M distance in second coordination shell of RuO2-HEAE, enabling direct O-O coupling. This OPM-type catalyst delivers ~1500 h of stable operation at 1 A cm−2 and 50 °C, demonstrating superior durability versus most reported RuO2-based catalysts. This work provides fundamental insights for designing highly stable proton exchange membrane water electrolysis.
4 September 2023 in Industrial Chemistry & Materials
Achieving single-atom dispersion of metal active components remains daunting. Here, we summarized several key synthesis methods and applications of high-loading SACs, hoping to highlight important research areas for future development.
25 February 2010 in Industrial & Engineering Chemistry Research