Solar control film is usually positioned on the interior side of the window to reduce heat radiation into buildings. This work, in contrast, investigates the thermal performance and durability properties of window glazing with film on the exterior side and glazing with an additional TiO2 layer, as a protective film, on the exterior side. A small-sized hot-box was developed to evaluate the performance of glass samples: low-E glass, clear glass with solar film and tinted glass with TiO2 coating. It was concluded that the glass with coating facing toward outdoor could result in a reduction of interior surface temperature by 2℃–7℃. The thermal discomfort caused by these exterior films for the occupants would therefore be lowered. Experiments on surface properties found that heat treatment could provide improved durability properties for low-E and TiO2 glass samples. Adding another TiO2 layer to the low-E or solar films was found to exhibit even lower interior temperatures. An energy analysis showed that the heat transfer rate to the building inside was reduced by 25.8% for TiO2/solar film on the exterior compared to the low-E glass with film facing inside. TiO2/solar film placed on the exterior side is therefore highly recommended for window glazing by this study.
Toluene and naphthalene degrading (ND) bacteria, obtained from contaminated lake sediment, were used to degrade both monoaromatics and polycyclic aromatic hydrocarbons (PAHs) and the effects of cosubstrates and cocultures were examined. When toluene and naphthalene enrichments were used, the effect of the substrate interaction on their metabolism was found to be inhibitory and yet the cocultures were stimulatory, especially for toluene enrichment degradation of naphthalene (with toluene). Pseudomonas putida M2T14, a toluene degrading isolate, could efficiently degrade benzene and toluene but not naphthalene. Nonetheless, when toluene was present, this monoaromatic degrader became capable of degrading PAHs, among which the methyl substituted PAHs (mPAHs) were preferred to their corresponding unsubstituted PAHs (uPAHs). Pseudomonas azelaica ND isolate could degrade benzene, toluene, and all test PAHs. Although the uPAHs were preferred, the degradation rates of mPAHs were greatly increased via substrate inte...
26 July 2016 in Journal of the Chinese Institute of Engineers
Inserting carbon dioxide (CO2) into ammonia molecules to produce urea is a traditional CO2 utilization method. An ionic liquid (IL), 1-butyl-3-methylimidazolium bromide ([Bmim]Br), was used as reaction medium and [Bmim]Br/KOH as catalyst. This study investigates CO2 carbonylation of cyclohexylamine and its reaction performance in a number of low- and high-pressure CO2/IL systems. The reaction yield was greatly increased as pressure ranges changed from 15–50 bar to 80–100 bar; the physiochemical properties of substrates and catalyst were greatly affected by CO2 in supercritical state. The yield was improved from 69% at 30 bar to 91.6% at 100 bar, much better than a previous study result of 53.5%, but as pressures further increased, a significant decrease was observed. The reaction activation energy was calculated to be 3.942 and 4.354 kcal/mol in mild and supercritical conditions. This process shows a low threshold reaction energy and great potential for industrial applications to store CO2 in amine molecular structures.