The estimation of aboveground biomass (AGB), an important indicator of grassland production, is crucial for evaluating livestock carrying capacity, understanding the response and feedback to climate change, and achieving sustainable development. Most existing grassland AGB estimation studies were based on empirical methods, in which field measurements are indispensable, hindering their operational use. This study proposed a novel physically-based grassland AGB retrieval method through the inversion of PROSAIL model against MCD43A4 imagery. This method relies on the basic understanding that grassland is herbaceous, and therefore AGB can be represented as the product of leaf dry matter content (Cm) and leaf area index (LAI), i.e., AGB = Cm × LAI. First, the PROSAIL model was parameterized according to the literature regarding grassland parameters retrieval, then Cm and LAI were retrieved using a lookup table (LUT) algorithm, finally, the retrieved Cm and LAI were multiplied to obtain the AGB. The method was assessed in Zoige Plateau, China. Results show that it could reproduce the reference AGB map, which is generated by upscaling the field measurements, in terms of magnitude (with RMSE and R-RMSE of 60.06 g·m−2 and 18.1%, respectively) and spatial distribution. The estimated AGB time series also agreed reasonably well with the expected temporal dynamic trends of the grassland in our study area. The greatest advantage of our method is its fully physical nature, i.e., no field measurement is needed. Our method has the potential for operational monitoring of grassland AGB at regional and even larger scales.
Land cover mapping in mountainous areas is a notoriously challenging task due to the rugged terrain and high spatial heterogeneity of land surfaces as well as the frequent cloud contamination of satellite imagery. Taking Southwestern China (a typical mountainous region) as an example, this paper established a new HC-MMK approach (Hierarchical Classification based on Multi-source and Multi-temporal data and geo-Knowledge), which was especially designed for land cover mapping in mountainous areas. This approach was taken in order to generate a 30 m-resolution land cover product in Southwestern China in 2010 (hereinafter referred to as CLC-SW2010). The multi-temporal native HJ (HuanJing, small satellite constellation for disaster and environmental monitoring) CCD (Charge-Coupled Device) images, Landsat TM (Thematic Mapper) images and topographical data (including elevation, aspect, slope, etc.) were taken as the main input data sources. Hierarchical classification tree construction and a five-step knowledge-based interactive quality control were the major components of this proposed approach. The CLC-SW2010 product contained six primary categories and 38 secondary categories, which covered about 2.33 million km2 (accounting for about a quarter of the land area of China). The accuracies of primary and secondary categories for CLC-SW2010 reached 95.09% and 87.14%, respectively, which were assessed independently by a third-party group. This product has so far been used to estimate the terrestrial carbon stocks and assess the quality of the ecological environments. The proposed HC-MMK approach could be used not only in mountainous areas, but also for plains, hills and other regions. Meanwhile, this study could also be used as a reference for other land cover mapping projects over large areas or even the entire globe.
Land cover samples are usually the foundation for supervised classification. Unfortunately, for land cover mapping in large areas, only limited samples can be used due to the time-consuming and labor-intensive sample collection. A novel and practical Object-oriented Iterative Classification method based on Multiple Classifiers Ensemble (OIC-MCE) was proposed in this paper. It systematically integrated object-oriented segmentation, Multiple Classifier Ensemble (MCE), and Iterative Classification (IC). In this method, the initial training samples were updated self-adaptively during the iterative processes. Based on these updated training samples, the inconsistent regions (ICR) in the classification results of the MCE method were reclassified to reduce their uncertainty. Three typical case studies in the China-Pakistan Economic Corridor (CPEC) indicate that the overall accuracy of the OIC-MCE method is significantly higher than that of the single classifier. After five iterations, the overall accuracy of the OIC-MCE approach increased by 5.58%–8.38% compared to the accuracy of the traditional MCE method. The spatial distribution of newly added training samples generated by the OIC-MCE approach was relatively uniform. It was confirmed by ten repeated experiments that the OIC-MCE approach has good stability. More importantly, even if the initial sample size reduced by 65%, the quality of the final classification result based on the proposed OIC-MCE approach would not be greatly affected. Therefore, the proposed OIC-MCE approach provides a new solution for land cover mapping with limited samples. Certainly, it is also well suited for land cover mapping with abundant samples.
Grazing intensity (GI) is an important indicator for grazing situations in pastoral areas. However, it has been difficult to be observed directly in the field, due to the randomness and dynamics of the grazing behavior of livestock. Consequently, the lack of actual GI information has become a common issue in studies on quantitatively estimating GI. In this paper, a novel quantitative estimation method is proposed based on the Space-Air-Ground integrated monitoring technology. It systematically integrates GPS tracking technology, Unmanned Aerial Vehicle (UAV) observation technology, and satellite remote sensing technology. Taking Xiangdong Village on the Zoige Plateau as a study area, the trajectory data and UAV images were acquired by the GPS tracking experiments and UAV observation experiments, respectively. The GI at paddock scale (PGI) was then generated with the Kernel Density Estimation (KDE) algorithm and the above data. Taking the generated PGI as training data, an estimation model of GI at region scale (RGI) was constructed by using the time-series satellite remote sensing images and random forest regression algorithm. Finally, the time-series RGI data with a spatial resolution of 10 m in Xiangdong Village were produced by the above model. The accuracy assessment demonstrated that the generated time-series RGI data could reflect the spatial-temporal heterogeneity of actual GI, with a mean absolute error of 0.9301 and r2 of 0. 8573. The proposed method provides a new idea for generating the actual GI on the ground and the time-series RGI data. This study also highlights the feasibility and potential of using the Space-Air-Ground integrated monitoring technology to generate time-series RGI data with high spatial resolution. The generated time-series RGI data would provide data support for the formulation of policies and plans related to the sustainable development of animal husbandry.
The spatially explicit aboveground biomass (AGB) generated through upscaling field measurements is critical for carbon cycle simulation and optimized management of grasslands. However, the spatial gaps that exist in the optical remote sensing data, underutilization of the multispectral data cube and unavailability of uncertainty information hinder the generation of seamless and accurate AGB maps. This study proposes a novel framework to address the above challenges. The proposed framework filled the spatial gaps in the remote sensing data via the consistent adjustment of the climatology to actual observations (CACAO) method. Gaussian process regression (GPR) was used to fully exploit the multispectral data cube and generated the pixelwise uncertainty concurrent with the AGB estimation. A case study in a 100 km × 100 km area located in the Zoige Plateau, China was used to evaluate this framework. The results show that the CACAO method can fill almost all of the gaps, accounting for 93.1% of the study area, with satisfactory accuracy. The generated AGB map from the GPR was characterized by a relatively high accuracy (R2 = 0.64, RMSE = 48.13 g/m2) compared to vegetation index-derived ones, and was accompanied by a corresponding uncertainty map that provides a new source of information on the credibility of each pixel. This study demonstrates the potential of the joint use of gap-filling and machine-learning methods to generate spatially explicit AGB.
Increasing attention is being paid on leaf area index (LAI) retrieval in mountainous areas. Mountainous areas present extreme topographic variability, and are characterized by more spatial heterogeneity and inaccessibility compared with flat terrain. It is difficult to collect representative ground-truth measurements, and the validation of LAI in mountainous areas is still problematic. A cost-constrained sampling strategy (CSS) in support of LAI validation was presented in this study. To account for the influence of rugged terrain on implementation cost, a cost-objective function was incorporated to traditional conditioned Latin hypercube (CLH) sampling strategy. A case study in Hailuogou, Sichuan province, China was used to assess the efficiency of CSS. Normalized difference vegetation index (NDVI), land cover type, and slope were selected as auxiliary variables to present the variability of LAI in the study area. Results show that CSS can satisfactorily capture the variability across the site extent, while minimizing field efforts. One appealing feature of CSS is that the compromise between representativeness and implementation cost can be regulated according to actual surface heterogeneity and budget constraints, and this makes CSS flexible. Although the proposed method was only validated for the auxiliary variables rather than the LAI measurements, it serves as a starting point for establishing the locations of field plots and facilitates the preparation of field campaigns in mountainous areas.