Lithium-ion batteries (LIBs) have recently become popular for energy storage due to their high energy density, storage capacity, and long-term cycle life. Although binders make up only a small proportion of LIBs, they have become the key to promoting the transformation of the battery preparation process. Along with the development of binders, the battery manufacturing process has evolved from the conventional slurry-casting (SC) process to a more attractive solvent-free (SF) method. Compared with traditional LIBs manufacturing method, the SF method could dramatically reduce and increase the energy density due to the reduced preparation steps and enhanced electrode loading. Polytetrafluoroethylene (PTFE), as a typical binder, has played an important role in fabricating high-performance LIBs, particularly in regards to the SF technique. In this paper, the development history and application status of PTFE binder was introduced, and then its contributions and the inherent problems involved in the SF process were described and analyzed. Finally, the viewpoints concerning the future trends for PTFE-based SF manufacturing methods were also discussed. We hope this work can inspire future research concerning high-quality SF binders and assist in promoting the evolution of the SF manufacturing technology in regards to LIBs.

As a popular energy storage equipment, lithium-ion batteries (LIBs) have many advantages, such as high energy density and long cycle life. At this stage, with the increasing demand for energy storage materials, the industrialization of batteries is facing new challenges such as enhancing efficiency, reducing energy consumption, and improving battery performance. In particular, the challenges mentioned above are particularly critical in advanced next-generation battery manufacturing. For batteries, the electrode processing process plays a crucial role in advancing lithium-ion battery technology and has a significant impact on battery energy density, manufacturing cost, and yield. Dry electrode technology is an emerging technology that has attracted extensive attention from both academia and the manufacturing industry due to its unique advantages and compatibility. This paper provides a detailed introduction to the development status and application examples of various dry electrode technologies. It discusses the latest advancements in commonly used binders for different dry processes and offers insights into future electrode manufacturing.

Solid-state electrolytes (SSEs), particularly garnet-type Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO), offer high stability and a wide electrochemical window. However, their grain boundaries limit ionic conductivity, necessitating high-temperature sintering for improved performance. Yet, this process results in brittle electrolytes prone to fracture during manufacturing. To address these difficulties, solvent-free solid-state electrolytes with a polyacrylonitrile (PAN) coating on LLZTO particles are reported in this work. Most notably, the PAN-coated LLZTO (PAN@LLZTO) electrolyte demonstrates self-supporting characteristics, eliminating the need for high-temperature sintering. Importantly, the homogeneous polymeric PAN coating, synthesized via the described method, facilitates efficient Li⁺ transport between LLZTO particles. This electrolyte not only achieves an ionic conductivity of up to 2.11 × 10⁻³ S cm⁻¹ but also exhibits excellent interfacial compatibility with lithium. Furthermore, a lithium metal battery incorporating 3% PAN@LLZTO-3%PTFE as the solid-state electrolyte and LiFePO₄ as the cathode demonstrates a remarkable specific discharge capacity of 169 mAh g⁻¹ at 0.1 °C. The strategy of organic polymer-coated LLZTO provides the possibility of a green manufacturing process for preparing room-temperature sinter-free solid-state electrolytes, which shows significant cost-effectiveness.