This paper analyzes traditional vibration suppression methods in order to solve the vibration problem caused by the stiffness of flexible industrial robots. The principle of closed-loop control dynamic feedforward vibration suppression is described as the main method for solving robot vibration suppression. This paper proposes a method for time-lag filtering based on T-trajectory interpolation, which combines the T-planning curve and the time-lag filtering method. The method’s basic principle is to dynamically adjust the trajectory output through the algorithm, which effectively suppresses the amplitude of the harmonic components of a specific frequency band to improve the vibration response of industrial robot systems. This experiment compared traditional vibration suppression methods with the time-lag filtering method based on T-trajectory interpolation. A straight-line method was proposed to measure the degree of vibration. The results demonstrate that the time-lag filtering method based on T-trajectory interpolation is highly effective in reducing the vibration of industrial robots. This makes it an excellent option for scenarios that demand real-time response and high-precision control, ultimately enhancing the efficiency and stability of robots in performing their tasks.
Vibration problems have become one of the most important factors affecting robot performance. To this end, a terminal residual vibration suppression method based on joint trajectory optimization is proposed to improve the accuracy and stability of robot motion. Firstly, based on the characteristics of the friction nonlinearity due to joint coupling and physical feasibility of dynamic parameters, a semidefinite programming method is used to identify dynamic parameters with actual physical meaning, thereby obtaining an accurate dynamic model. Then, based on the result of the residual vibration time domain analysis, a joint trajectory optimization model with the goal of minimizing joint tracking error is established. The Chebyshev collocation method is used to discretize the optimization model. The dynamic model is used as the optimization constraint, and barycentric interpolation is used to obtain the optimized joint motion trajectory. Finally, industrial robot experiments prove that the vibration suppression method proposed in this article can reduce the maximum acceleration amplitude of residual vibration by 62% and the vibration duration by 71%. Compared with the input shaping method, the method proposed in this paper can reduce the terminal residual vibration more effectively and ensure the consistency of running time and trajectory.
Automatic charging can improve the endurance of unmanned work platforms, but the docking accuracy limits its success rate and charging efficiency. In order to solve this problem, an accurate docking method based on elliptic integral series expansion is proposed. The relationship between load voltage and coil transverse offset distance is constructed by establishing a coil mutual inductance circuit, a coil center points transverse offset mutual inductance coefficient calculation model, and a triangular positioning geometry structure Numerical integration and elliptic integration series expansion are used to solve the exact correspondence between the coil mutual inductance coefficient and the coil transverse offset distance. Finally, the relationship between the load voltage and the lateral offset distance from the center of the coil is obtained. The method does not require the arrangement of additional sensors and coils, nor does it require extensive prior data collection for unique coil configurations. The system can be used for energy transmission and as a displacement sensor. It has been verified by COMSOL simulations that the maximum relative error in the coefficient of mutual inductance is 6.507% for the numerical integration method and 9.022% for the elliptic integration series expansion approach. After experimental verification, the maximum average relative error of the load voltage is 4.048% for the numerical integration method and 11.89% for the elliptic integration series expansion approach. This method achieved high accuracy positioning measurement with the error range at the centimeter level. The method contributes to the long-term application of unmanned operating platforms.
Aiming at the problems of difficult hard constraint enforcement, weak environmental generalization ability in the safe trajectory planning of manipulators in complex environments, a Policy-Guided Model Predictive Path Integral (PG-MPPI) planning framework is proposed. This framework integrates the advantages of reinforcement learning and model predictive control to construct a global prior guidance, local real-time optimization and hard constraint safety assurance: a Constraint-Discounted Soft Actor-Critic (CD-SAC) offline learning policy is designed, which incorporates the configuration-space distance field as a safety guidance term to realize the learning of obstacle avoidance behavior; the offline policy is used to guide the online sampling and optimization of MPPI, improving sampling efficiency and planning quality; a Control Barrier Function (CBF) safety filter is introduced to revise control commands in real time, ensuring the strict satisfaction of constraints. Taking the SIASUN T12B manipulator as the research object, simulation comparison experiments are carried out in multi-obstacle scenarios. The results show that the PG-MPPI algorithm outperforms the comparison algorithms in the success rate of collision-free target reaching, ensure the smoothness and feasibility of the trajectory, and has a good adaptive capacity to dynamic environments, thus providing an efficient solution for the autonomous and safe operation of manipulators.
Aiming at the problems of difficult hard-constraint enforcement and weak environmental generalization ability in the safe trajectory planning of manipulators in complex environments, a Policy-Guided Model Predictive Path Integral (PG-MPPI) planning framework is proposed. This framework integrates the advantages of reinforcement learning and model predictive control to construct a global prior guidance, local real-time optimization and hard-constraint safety assurance: a Constraint-Discounted Soft Actor–Critic (CD-SAC) offline learning policy is designed, which incorporates the configuration-space distance field as a safety guidance term to realize the learning of obstacle avoidance behavior; the offline policy is used to guide the online sampling and optimization of MPPI, improving sampling efficiency and planning quality; and a Control Barrier Function (CBF) safety filter is introduced to revise control commands in real time, ensuring the strict satisfaction of constraints. Taking the SIASUN T12B manipulator as the research object, simulation comparison experiments are carried out in multi-obstacle scenarios. The results show that the PG-MPPI algorithm outperforms the comparison algorithms in the success rate of collision-free target reaching, ensures the smoothness and feasibility of the trajectory, and has a good adaptive capacity to complex environments with unknown obstacle configurations, thus providing an efficient solution for the autonomous and safe operation of manipulators.
Vibration problems have become one of the most important factors affecting robot performance. To this end, a terminal residual vibration suppression method based on joint trajectory optimization is proposed to improve the accuracy and stability of robot motion. Firstly, based on the characteristics of the friction nonlinearity due to joint coupling and physical feasibility of dynamic parameters, a semidefinite programming method is used to identify dynamic parameters with actual physical meaning, thereby obtaining an accurate dynamic model. Then, based on the result of the residual vibration time domain analysis, a joint trajectory optimization model with the goal of minimizing joint tracking error is established. The Chebyshev collocation method is used to discretize the optimization model. The dynamic model is used as the optimization constraint, and barycentric interpolation is used to obtain the optimized joint motion trajectory. Finally, industrial robot experiments prove that the vibration suppression method proposed in this article can reduce the maximum acceleration amplitude of residual vibration by 62% and the vibration duration by 71%. Compared with the input shaping method, the method proposed in this paper can reduce the terminal residual vibration more effectively and ensure the consistency of running time and trajectory.