Due to a high Raman threshold and serious thermal effect, a challenge is to achieve efficient continuous-wave (CW) operation of a crystalline Raman laser at 1.5 µm. Based on effective thermal management and the self-Raman effect, we demonstrate, to our knowledge, the first efficient CW operation of a Raman laser at 1.5 µm. We achieve 685 mW of CW eye-safe emission at 1524.5 nm by the use of a 20-mm-long composite and 300-µm pump beam radius, with a diode-to-Stokes conversion efficiency of 4.8%. Lasers operating at have found many important applications in various areas such as optical communication, laser radar, laser ranging, remote sensing, and spectral research.
The CLP Publishing collects CLP journals and partnered optics and photonics journals, and provides readers an optical publishing platform with global influence. SPIE, OSA, CUP. Chinese Laser Press (CLP), established by Shanghai Institute of Optics and Fine Mechanics (SIOM), Chinese Academy of Sciences (CAS) and Chinese Optical Society (COS) in 2009, nowadays publishes eight journals and manages three online platforms.
The 1.4–1.8 µm eye-safe lasers have been widely used in the fields of laser medicine and laser detection and ranging. The diamond Raman lasers are capable of delivering excellent characteristics, such as good beam quality concomitantly with high output power. The intra-cavity diamond Raman lasers have the advantages of compactness and low Raman thresholds compared to the external-cavity Raman lasers. However, to date, the intra-cavity diamond cascaded Raman lasers in the spectral region of the eye-safe laser have an output power of only a few hundred milliwatts. A 1485 nm Nd:YVO4/diamond intra-cavity cascaded Raman laser is reported in this paper. The mode matching and stability of the cavity were optimally designed by a V-shaped folded cavity, which yielded an average output power of up to 2.2 W at a pulse repetition frequency of 50 kHz with a diode to second-Stokes conversion efficiency of 8.1%. Meanwhile, the pulse width of the second-Stokes laser was drastically reduced from 60 ns of the fundamental laser to 1.1 ns, which resulted in a high peak power of 40 kW. The device also exhibited single longitudinal mode with a narrow spectral width of < 0.02 nm.
We demonstrate an actively Q -switched orthogonally-polarized dual-wavelength laser at 1047.4 nm and 1053.4 nm with high average power and high efficiency. The gain competition between dual-wavelength lasers is effectively suppressed by using two Nd:YLF crystals as laser gain medium. Investigations concerning different resonator structures and pulse repetition frequency were conducted to achieve the best performance of this laser. Under the total incident pump power of 32.7 W, a maximum dual-wavelength laser output power of 13.4 W is obtained at the pulse repetition rate of 30 kHz, corresponding to an optical conversion efficiency of 41%. For 1047.4 nm and 1053.4 nm lasers, the maximum average output powers are as high as 7.6 W and 5.8 W, respectively, and they also demonstrate good output power stability and beam quality. This orthogonally-polarized dual-wavelength laser has significant practical applications in various fields, such as terahertz radiation generation, precision metrology, laser radar, and spectral analysis.
In this paper, the composite Nd:YVO4 laser crystal is in-band pumped by a wavelength-locked laser diode at 878.9 nm, with the purpose of reducing thermal effects and improving pump absorption simultaneously. By using the YVO4 and BaWO4 crystals as Raman media, the influences of crystal properties, resonator structure and stability on the performance of continuous-wave intracavity Raman laser are investigated experimentally and theoretically. The results show that the resonator stability greatly affects laser performance due to the long cavity length of intracavity Raman laser. By choosing the Raman medium with high Raman gain, we can not only obtain higher Raman conversion efficiency, but also reduce the thermal effect to a certain extent. Furthermore, the smaller the curvature radius of the output mirror in the plano-concave cavity structure, the greater the power density of the fundamental laser in the Raman crystal is and the wider the dynamic stability region of the resonator, and hence the higher output power of the Raman laser can be achieved. Finally, by using 30-mm BaWO4 crystal as Raman medium, a highest Raman output of 3.02 W is obtained at a pump power of 25.1 W, corresponding to a diode-to-Stokes optical conversion efficiency of 12%.