Erlend Sørmo

Dr. Erlend Sørmo

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2021 in Science of The Total Environment
Verified
Journal Article
Open access
ESErlend Sørmo
Erlend Sørmo
LSLudovica Silvani
Ludovica Silvani
NBNora Bjerkli
Nora Bjerkli
NHNikolas Hagemann
Nikolas Hagemann
AZAndrew R. Zimmerman
Andrew R. Zimmerman
GCGerard Cornelissen
Gerard Cornelissen
Biochars are considered potential sustainable sorbents to reduce the leaching of per- and polyfluoroalkyl substances (PFAS) from contaminated soils. However, biochar characteristics must probably be optimized to achieve useful sorption capacity. In the present work, eight waste timber biochars were produced, including biochars activated to different degrees, at different temperatures, and using both steam and CO2. In laboratory batch experiments, the eight biochars were amended to soil samples from two different horizons, with low and high total organic carbon (TOC, 1.6% and 34.2%, respectively), of a heavily PFAS-contaminated soil (1200-3800 μg kg-1 PFAStot), at varying doses (0, 0.1, 0.5, 1.0 and 5.0%). With a 5% amendment to the low-TOC soil, all eight biochars resulted in strongly reduced leachate PFAS concentrations (by 98-100%). At the same amendment dose in the high-TOC soil, leachate concentration reductions were more modest (23-100%). This was likely due to a strong PFAS-sorption to the high-TOC soil itself, as well as biochar pore clogging in the presence of abundant organic matter, resulting in fewer sorption sites available to PFAS. Reduction in PFAS leaching was proportional to the degree of activation and activation temperature. Thus, lower amendment doses of activated biochars were needed to reduce PFAS leaching to the same level as with the non-activated biochar. Activation however, came at a tradeoff with biochar yield. Furthermore, the adsorption ability of these biochars increased proportionally with PFAS-fluorocarbon chain length, demonstrating the role of hydrophobic interactions in reduction of PFAS leaching. Development of internal surface area and porosity was proposed as the main factor causing the improved performance of activated biochars. This study shows that woody residues such as waste timber can be used to produce effective sorbents for the remediation of PFAS-contaminated soil. It also highlights the desirability of sorbate and matrix-specific optimization of biochar production.

19 November 2022 in Journal of Hazardous Materials
Verified
Journal Article
Open access
KKKatinka M. Krahn
Katinka M. Krahn
GCGerard Cornelissen
Gerard Cornelissen
GCGabriela Castro
Gabriela Castro
HAHans Peter H. Arp
Hans Peter H. Arp
AAAlexandros G. Asimakopoulos
Alexandros G. Asimakopoulos
ESErlend Sørmo
Erlend Sørmo
The use of sewage sludge to produce biochar-based sorbents for per- and polyfluoroalkyl substances (PFAS) removal from water and soil may be an economically and environmentally sustainable waste management option. This study compared the sorption of six perfluorinated carboxylic acids (PFCAs) by two sewage sludge biochars (SSBCs) and one wood chip biochar (WCBC), dry pyrolyzed at 700 °C. Batch sorption tests were conducted by adding individual PFCAs and a PFCA-mixture to pure biochars and mixtures of biochar and a sandy soil (1.3% TOC). PFAS-sorption to the SSBCs exhibited log-linear biochar-water distribution coefficients (log Kd), comparable to those previously reported for commercial activated carbons (e.g., 5.73 ± 0.02 for perfluorooctanoic acid at 1 µg/L). The strong sorption of PFCAs was attributed to the SSBCs relatively high pore volumes in the pore size range that can accommodate these compounds. Sorption was attenuated by the presence of soil (by factors 3-10), by the presence of a mixture of PFCAs (by factors of 6-532) and by both together (by factors of 8-6581), indicating strongly competitive sorption between PFCA-congeners, and less severe sorption attenuation by soil organic matter. These findings could enable sustainable value chains for SSBs in soil remediation and water filtration solutions.

1 June 2020 in Science of The Total Environment
Verified
Journal Article
Open access
SHSarah Hale
Sarah Hale
NNNeneng L. Nurida
Neneng L. Nurida
JUJubaedah
Jubaedah
JMJan Mulder
Jan Mulder
ESErlend Sørmo
Erlend Sørmo
GCGerard Cornelissen
Gerard Cornelissen
A multi-season field trial was carried out to investigate the effect of the amendment of biochar, lime, ash and washed biochar on the growth of maize. A degraded, strongly acidic Ultisol (pHKCl 3.60), with a relatively high exchangeable aluminium content (2.4 cmolc/kg) and a low exchangeable calcium content (0.99 cmolc/kg), was used. Soil was treated once at the beginning of the field trial and crop growth was monitored over seven planting seasons (PS). All treatments increased maize yield. The average increases were; seven times for biochar, five times for lime, five times for washed biochar and eight times for ash treatment, when compared to the control across all PS. The effect of biochar, lime and ash treatments on maize yield were sustained over the seven PS. Soil pHKCl was significantly increased (p < 0.05 level) following the addition of all of the amendment materials. All treatments significantly reduced the concentration of Al3+ when compared to the control (p < 0.05), with the lowest concentrations for the lime and ash treatments. The ash treatment also increased the concentration of macronutrients (K, P and Mg) to the greatest extent. Results showed that there was a clear liming effect at play. The better performance of biochar compared to lime, despite lime having the highest pH and the lowest Al3+ concentration, can be explained by the additional K, Mg and P the biochar adds to the soil. Results also showed a clear nutrient addition effect where ash added the most nutrients. Overall, this work supports the fact that small scale farmers in Indonesia should produce biochar from their waste agricultural materials. Doing so not only provides an increase in crop productivity, but also sequesters carbon resulting in the best overall environmental benefit.

18 April 2023 in Journal of Hazardous Materials
Verified
Journal Article
Open access
ESErlend Sørmo
Erlend Sørmo
GCGabriela Castro
Gabriela Castro
MHMichel Hubert
Michel Hubert
VLViktória Licul-Kucera
Viktória Licul-Kucera
MQMarjorie Quintanilla
Marjorie Quintanilla
HAHans Peter H. Arp
Hans Peter H. Arp
Current treatment options for organic waste contaminated with per- and polyfluoroalkyl substances (PFAS) are generally limited to incineration, composting or landfilling, all resulting in emissions. Dry pyrolysis is a promising emerging alternative to these practices, but there is uncertainty related to the fate of PFAS during this process. The present work first developed a robust method for the determination of PFAS in complex matrices, such as sewage sludge and biochar. Then, a mass balance was established for 56 different PFAS during full-scale pyrolysis (2-10 kg biochar hr-1, 500-800 °C) of sewage sludges, food waste reject, garden waste and waste timber. PFAS were found in all wastes (56-3651 ng g-1), but pyrolysis resulted in a ≥ 96.9% removal. Residual PFAS (0.1-3.4 ng g-1) were detected in biochars obtained at temperatures up to 750 °C and were dominated by long chain PFAS. Emitted PFAS loads ranged from 0.01 to 3.1 mg tonne-1 of biochar produced and were dominated by short chain PFAS. Emissions made up < 3% of total PFAS-mass in the wastes. Remaining uncertainties are mainly related to the presence of thermal degradation products in flue gas and condensation oils.

28 May 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
SHSarah Hale
Sarah Hale
ARAntónio Roque
António Roque
GOGudny Okkenhaug
Gudny Okkenhaug
ESErlend Sørmo
Erlend Sørmo
TLThomas Lenoir
Thomas Lenoir
BŽBojan Žlender
Bojan Žlender
The construction and demolition of infrastructure can produce a surplus of excavated soils that ends up at landfills. This practice is not sustainable, and approaches are needed to reduce soil waste and minimize environmental and human health hazards. The “Reuse of urban soils and sites” Working Group in the European Large Geotechnical Institute Platform (ELGIP) works towards a safe and resource efficient use of excavated soils for construction. By considering relevant literature and practicals based on experience in the participating ELGIP countries (France, Norway, Portugal, Slovenia and Sweden), this study presents current practice related to the reuse of excavated soils, and the main barriers (regulatory, organizational, logistical and material quality) to effectively reuse them. Results show that there is no consensus on the best strategies to manage excavated soils in urban areas. This paper provides suggestions of ways in which stakeholders can increase reuse of excavated soils.

1 May 2020 in Science of The Total Environment
Verified
Journal Article
Open access
ESErlend Sørmo
Erlend Sørmo
LSLudovica Silvani
Ludovica Silvani
GTGorm Thune
Gorm Thune
HGHelmut Gerber
Helmut Gerber
HSHans Peter Schmidt
Hans Peter Schmidt
GCGerard Cornelissen
Gerard Cornelissen
Pyrolysis of organic waste or woody materials yields a stable carbonaceous product that can be mixed into soil and is often termed "biochar". During pyrolysis carbon-containing gases are emitted, mainly volatile organic carbon species, carbon monoxide and aerosols. In modern pyrolysis units, gases are after-combusted, which reduces emissions substantially. However, emission data for medium- to large-scale pyrolysis units are scant, both regarding gases, aerosols, heavy metals and polycyclic aromatic hydrocarbons (PAH). Making biochar from lightly contaminated waste timber (WT) is a promising waste handling option as it results in the potential valorization of such residues into e.g. sorbents for contaminant stabilization. For this process to be environmentally sustainable, emissions during the process need to be low and the resulting biochar of sufficient quality. To investigate both issues, we pyrolyzed three batches of WT and one reference batch of clean wood/leaves in a representative medium-scale pyrolysis unit (Pyreg-500, 750 t/year) with after-combustion of the pyrolysis gases, and measured the gas, aerosol, metal and PAH emissions, as well as the characteristics and contamination levels of the resulting biochar, including contaminant leaching. Mean emission factors for the WT were (g/kg biochar); CO = 7 ± 2, non-methane volatile organic compounds (NMVOC) = 0.86 ± 0.14, CH4 = 0, aerosols (PM10) = 0.6 ± 0.3, total products of incomplete combustion (PIC) = 9 ± 3, PAH-16 = (2.0 ± 0.2) · 10-5, As (most abundant metal) = (2.3 ± 1.9) · 10-3 and NOX = 0.65 ± 0.10. There were no significant differences in emission factors between the pyrolysis of WT and the reference respectively, except for PM10, NMVOC, and PAH-16, which were significantly lower for WT than for the clean wood/leaves. The WT biochar did not satisfy premium or basic European Biochar Certificate criteria due to high levels of zinc and PAH. However, leachable metal contents were <0.1% of total contents. Still, use of the WT-biochar without further improvement or investigation would be limited to ex situ use, not improving soil fertility or in situ remediation.