Heat transfer through building envelopes is a crucial aspect of energy efficiency in construction. Masonry walls, being a commonly used building material, have a significant impact on thermal performance. In recent years, green roofs and walls have gained popularity as a means of improving energy efficiency, reducing urban heat islands, and enhancing building aesthetics. This study aims to investigate the effect of ivy (Hedera helix) greening on heat transfer through masonry walls and their corresponding surface temperatures. Ivy was chosen as a model plant due to its widespread use and ability to cover large surface areas. The results of this study suggest that ivy greening can have a significant impact on the thermal performance of masonry walls. During winter, the heat transfer coefficient of greened walls was found to be up to 30% lower compared to non-greened walls. This indicates that ivy greening can help reduce energy consumption for heating and thus improve the energy efficiency of buildings. In addition, the surface temperature under the ivy was found to be significantly higher than on the bare wall during winter. However, during summer, the surface temperature under the ivy was lower than on the bare wall, which may help reduce cooling energy consumption. The results of this study are consistent with previous research in the field. Overall, this study provides valuable insights into the potential benefits of ivy greening on the thermal performance of masonry walls.

There is an increasing demand for green plant walls in indoor environments because of their multifaced benefits, such as aesthetic appeal, indoor air quality improvement, or psychological well-being. Mosses are believed to be excellent for these walls due to their easy application and maintenance. However, so far there is no evidence for their indoor survival. In this study, we tested the moss species Hypnum cupressiforme, Bryachythecium rutabulum, Eurrhynchium angustirete, Thuidium tamariscinum, Streblotrichum convolutum, Syntrichia ruralis, and Ceratodon purpureus for indoor use in living moss walls. We evaluated their vitality through the monitoring of leaf coloration over a twelve month period, subjecting them to varying temperature ranges (14–20 °C), humidity levels (60–100%), and diverse irrigation methods (drip and spray irrigation, 300–1500 mL per day) within controlled climate chambers. Depending on the combination of these variables, mosses survived up to six months. Hypnum cupressiforme and Ceratodon purpureus performed best. However, as the time span of survival was limited, the use of living mosses for indoor purposes at the current stage cannot be recommended. An additional problem is that the requisition of living material such as in the culturing of moss under horticultural conditions is difficult and harvesting from natural environments is detrimental to most habitats.

Integrating photovoltaic (PV) systems with green roofs presents a synergistic approach to urban sustainability. Many existing flat-roof PV installations, often east–west oriented with limited elevation, present integration challenges for green roofs and are therefore understudied. This study addresses this by investigating the microclimatic effects of retrofitting an extensive green roof beneath such an existing PV array. Over a two-year period, continuous measurements of sub-panel air temperature, relative humidity, and module surface temperature were conducted. Results show that the green roof reduced average midday sub-panel air temperatures by 1.7–2.2 °C, with peak reductions up to 8 °C during summer, while nighttime temperatures were higher above the green roof. Relative humidity increased by up to 8.1 percentage points and module surface temperatures beneath the green roof were lowered by 0.4–1.5 °C, though with greater variability. Computational fluid dynamics simulations confirmed that evaporative cooling was spatially confined beneath the panels and highlighted the influence of structural features on airflow and convective cooling. Despite limited vegetation beneath the panels, the green roof retained moisture longer than the gravel roof, resulting in particularly strong cooling effects in the days following rainfall. The study highlights the retrofitting potential for improving rooftop climates, while showing key design recommendations for enhanced system performance.

Particulate matter (PM) is a major health risk, particularly in indoor environments where air quality should be optimized and pollution reduced efficiently. While technical air purification systems can be costly and impractical, indoor plants offer a sustainable alternative. Using a novel methodology, four common indoor plants were evaluated for their potential to reduce PM_2.5. PM_2.5 was introduced via incense in a custom-designed test chamber with air circulating at 0.3 m/s. Air quality was continuously monitored with an AirGradient Open Air device (Model O-1PST), an optical particle counter. Statistical significance was confirmed by independent t-tests and ANOVA. Calcium chloride regulated relative humidity in the chamber. The plants Epipremnum aureum, Chlorophytum comosum, Nephrolepis exaltata, and Maranta leuconeura were assessed for their PM_2.5-binding capacity. Nephrolepis exaltata showed the highest reduction efficiency. Maranta leuconeura with its hemispherical leaf cells was tested for the first time and proved to trap particles within its leaf structure. It is ranked second and showed a stronger dependence on ambient PM_2.5 concentrations for reduction efficiency.

The construction industry consumes a substantial amount of resources. The associated environmental degradation and accelerating biodiversity loss highlight the urgent need for sustainable building materials that can match the performance of conventional alternatives. The objective of this experimental study was to investigate a fully reused, binder-free earth-based material that remains recyclable after its useful life. The material consists of smectite-rich excavation earth and processed demolition waste in a 2:1 ratio, which was compacted under high pressures and subsequently tested to evaluate its mechanical properties. Cylindrical specimens were fabricated via double-ended uniaxial compaction at pressures ranging from 12.5 to 100 MPa and consolidation times between 1 s and 30 min. They were then tested for their compressive strength and water durability. The findings indicate a strong positive correlation between compaction pressure, density, and compressive strength. A compressive strength of 19.2 MPa was reached by specimens that were compacted at 100 MPa for 30 min, achieving values comparable to standard C20/25 concrete. Despite an increase in strength, water durability decreased with increasing compaction pressure but improved with higher molding water content, possibly due to changes in the microstructure. The findings confirm that compressed earth can reach similar compressive strength to conventional materials with a significantly smaller ecological footprint.