Ilka Jahn

Prof. Ilka Jahn


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 April 2019 in IEEE Power and Energy Magazine
Verified
Journal Article
Closed access
WLWillem Leterme
Willem Leterme
IJIlka Jahn
Ilka Jahn
PRPhilipp Ruffing
Philipp Ruffing
KSKamran Sharifabadi
Kamran Sharifabadi
DHDirk Van Hertem
Dirk Van Hertem
Protecting high-voltage (HV) DC grids requires a different approach compared with that of ac power system protection and poses one of the major challenges that must be resolved before the realization of largescale HVdc grids that use equipment from multiple vendors. HVdc grid protection, which is essential for safe and reliable HVdc grid operation, entails the appropriate detection and fault clearing of dc-side short circuit faults (i.e., dc faults). In this context, fault clearing refers to interrupting the dc fault current and isolating the faulted component.

1 January 2017
Verified
Conference Paper
Closed access
IJIlka Jahn
Ilka Jahn
NJN. Johannesson
N. Johannesson
SNS. Norrga
S. Norrga

30 January 2020 in IEEE Transactions on Power Systems
Verified
Journal Article
Closed access
IJIlka Jahn
Ilka Jahn
FHFabian Hohn
Fabian Hohn
GCGeraint Chaffey
Geraint Chaffey
SNStaffan Norrga
Staffan Norrga
The integration of large amounts of renewable energy will require multiterminal high-voltage direct-current (MTDC) grids to reliably transport the energy over long distances. However, before building an MTDC grid, a functional protection system design is needed. Realistic and industrial studies are required to validate the functionality of such a system. In addition, further academic research as well as education in the field are needed. This paper presents an open-source, low-cost protection intelligent electronic device (IED) prototype for use in a laboratory environment. In particular, the IED design, its fastest measured performance, example results for different fault scenarios, and an assessment of its use in education are shown. The open-source IED is useful to accelerate industrial and academic research, as well as to enable education in protection for MTDC grids.

20 May 2022 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Open access
MNMehrdad Nahalparvari
Mehrdad Nahalparvari
MAMohsen Asoodar
Mohsen Asoodar
IJIlka Jahn
Ilka Jahn
LBLuca Bessegato
Luca Bessegato
ODOlivier Despouys
Olivier Despouys
HNHans-Peter Nee
Hans-Peter Nee
The stability of a power electronics system can be assessed by means of the impedance-based stability criterion. Impedance modeling is a useful tool to analyze the effect of different circuit parameters and control schemes on the behavior of a converter. Modeling the input impedance of a power electronics converter is often successful when having full knowledge of the converter topology, the circuit parameters, and the parameters and implementation of the control system. However, due to the proprietary nature of voltage source converter-based high voltage direct current systems, their exact control structure is often concealed. This complicates the calculation of the impedance of a modular multilevel converter, known for its complex internal dynamics. This paper proposes a method to estimate the impedance of a modular multilevel converter with partially black-boxed converter control. A discussion on partitioning the control system into open and closed parts is made, and the results are verified with simulations in time and frequency domains.

1 September 2017
Verified
Conference Paper
Closed access
TATim Augustin
Tim Augustin
IJIlka Jahn
Ilka Jahn
SNStaffan Norrga
Staffan Norrga
HNHans-Peter Nee
Hans-Peter Nee

16 May 2024 in Energies
Verified
Journal Article
Open access
PDF file
JRJaqueline Cabañas Ramos
Jaqueline Cabañas Ramos
MMMarc Moritz
Marc Moritz
NKNico Klötzl
Nico Klötzl
CNCeciel Nieuwenhout
Ceciel Nieuwenhout
WGWilliam Leon Garcia
William Leon Garcia
Antonello MontiAntonello Monti
Antonello Monti
Interoperable multi-vendor High-Voltage Direct-Current (HVDC) grids are a key enabler for the integration of renewable energy (in particular offshore wind) and its transmission over longer distances to consumers. However, most HVDC systems today are single-vendor and point-to-point. Various technical and non-technical aspects need to be considered, for example, (real-time) testing, legal aspects (intellectual property and regulation), and the multi-vendor interoperability process. This paper presents findings from the READY4DC project, which is a larger and open European effort involving diverse stakeholders, including HVDC manufacturers, transmission system operators, wind developers, academia, and research institutes. It summarizes key technical recommendations, emphasizing comprehensive interaction studies and the development of a structured legal framework to facilitate the development and operation of a multi-vendor, multi-terminal HVDC grid. The READY4DC project highlights the need for increased harmonization, transparent communication among stakeholders, and future-oriented research to ensure the robustness and interoperability of interconnected grids. Collaborative efforts are key for addressing technical complexities and advancing the deployment of multi-vendor multi-terminal HVDC technology.