Knowledge of the soil wetting pattern characteristics of vertical moistube-irrigation is essential for the design of cost-effective and efficient irrigation systems. We conducted laboratory experiments to determine the specific discharge calculation formula and compare the accuracy of HYDRUS-2D simulation. The cumulative infiltrations, wetting pattern distances, and water content distributions predicted with HYDRUS-2D were found to align well with experimental data. The results provide support for using HYDRUS-2D as a tool for investigating and designing moistube-irrigation management practices. Numerical simulations were carried out with HYDRUS-2D to investigate the influence of soil texture, initial water content, pressure head, moistube length, and buried depth on wetting pattern characteristics. There are small differences in the shape of the soil wetting pattern, as well as significant differences in size. The wetting pattern and water content contour are approximately “ellipsoid” around the moistube. Soil texture has a significant effect on the wetting pattern characteristics, the vertical and horizontal wetting front distance, and the wetted soil volume decrease along with the increase of soil clay content. The initial water content, pressure head, and moistube length have great influence on the wetting front distance and the wetted soil volume. Both are positively correlated with the initial water content, pressure head, and length. Moistube buried depth affects the wetting pattern position. The soil wetting pattern decreases synchronously as the buried depth drops.

Vertical line source irrigation is a water-saving irrigation method for enhancing direct water and nutrient delivery to the root zone, reducing soil evaporation and improving water and nutrient use efficiency. To identify its influencing factors, we performed computer simulations using the HYDRUS-2D software. The results indicate that for a given soil, the line source seepage area, but not the initial soil water content and buried depth, has a significant effect on the cumulative infiltration. We thus proposed a simplified method, taking into account the seepage area for predicting the cumulative infiltration based on the Philip model. Finally, we evaluated the accuracy of the simplified method using experimental data and found the cumulative infiltrations predicted by the simplified method were in very good agreement with the observed values, showing a low mean average error of 0.028–0.480 L, a root mean square error of 0.043–0.908 L, a percentage bias of 0.321–0.900 and a large Nash-Sutcliffe coefficient close to 1.0 (NSE ≥ 0.995). The results indicate that this simplified infiltration model, for which the only emitter parameter required is the seepage area, could provide a valuable and practical tool for irrigation design.

Straw strip burial in saline soil is an effective method for tideland reclamation in China, but optimal forms of straw strips for regulating soil water and salinity remain unclear. An indoor soil column test investigated the water and salt distribution in soil treated with four different straw forms under freshwater irrigation. The treatments included no straw layer (CK), straw stalks arranged longitudinally (T₅), horizontally (T₂₅), longitudinally combined horizontally in layers (T_25+2.5), and randomly (T_2.5). The results showed that compared to CK, T₂₅, T₅, and T_25+2.5 significantly reduced the infiltration rate of irrigation water, leading to prolonged infiltration times. Wetting front curves under T₅, T_25+2.5, and T₂₅ exhibited similar inverted “V” shapes, while CK and T_2.5 showed fluctuating parallel lines. Water retention in the soil was higher under straw strip treatments (T₅, T₂₅, T_25+2.5) and straw layer treatment (T_2.5) compared to CK after 24 h of the first irrigation. T₅ demonstrated the most effective salt removal, surpassing other treatments, with a desalination rate of 97.71%. Additionally, T₅ had the highest salt leaching efficiency (SLE) in the 0–20 cm soil layer, recommending it as the optimal form for managing saline soils in crop production due to its simplicity and higher SLE. We found that buried straw strips reduced soil water infiltration rate and wetting front propulsion speed, increased soil water content and enhanced salt leaching efficiency in the saline soil. Our findings provide a basis for developing strategies that improve soil quality and irrigation efficiency, mitigate the effects of salinity on crop production, and ensure food security for a rapidly growing global population.