The paper investigates the physical and mechanical properties of structures with the geometry of triply periodic minimal surfaces (TPMS). Test samples were made from polyamide using SLS (selective laser sintering) 3D printing technology, from polylactide using FDM (Fused deposition modeling) 3D printing technology, and from a photopolymer based on acrylates using LCD (liquid crystal display) technology; samples were made in the form of a cube with edge size 30 mm. The strength and energy-absorbing properties of TPMS-based cellular samples have been determined. To analyze the features of the geometry of the samples, the skeletal graph method was used. It is shown that this approach makes it possible to predict the physical and mechanical characteristics of products with TPMS geometry.
Triply periodic minimal surfaces (TPMSs) are found in many natural objects including butterfly wings, sea urchins, and biological membranes. They simultaneously have zero mean curvature at every point and a crystallographic group symmetry. A metamaterial can be created from such periodic surfaces or used as a reinforcement of a composite material. While a TPMS as a mathematical object has been known since 1865, only novel additive manufacturing (AM) technology made it possible to fabricate cellular materials with complex TPMS shapes. Cellular TPMS-based metamaterials have remarkable properties related to wetting/liquid penetration, shock absorption, and the absence of stress concentrators. Recent studies showed that TPMSs are also found in natural crystals when electron surfaces are considered. Artificial crystal-inspired metamaterials mimic such crystals including zeolites and schwarzites. These metamaterials are used for shock, acoustic waves, and vibration absorption, and as structural materials, heat exchangers, and for other applications. The choice of the crystalline cell of a material, as well as its microstructure, plays a decisive role in its properties. The new area of crystal-inspired materials has many common features with traditional biomimetics with models being borrowed from nature and adjusted for engineering applications.
The search for load-bearing, impact-resistant, and energy-absorbing cellular materials is of central interest in many fields including aerospace, automotive, civil, sports, packaging, and biomedical. In order to achieve the desired characteristic geometry and/or topology, a perspective approach may be used, such as utilization of atomic models as input data for 3D printing of macroscopic objects. In this paper, we suggest a new approach for the development of advanced cellular materials-crystallomorphic design based on selection of perspective crystal structures and modeling of their electron density distribution and utilization of isoelectronic surfaces as a generatrix for 3D-printed cellular materials. The ATLAS database, containing more than 10 million existing and predicted zeolites, was used as a source of data. Herein, we introduced a high-throughput screening of a data array of crystalline compounds. Several perspective designs were identified, implemented by 3D printing, and showed high characteristics. A linear correlation was found between the strength of the samples and the minimum angle and minimum bond length in the simplified crystal structures. A new cellular geometry with reinforcement struts and increased strength was discovered. This property was found by us independent of the other works, in which the cellular structures were developed by an explicit method. Thus, the developed approach holds perspective for the design of new cellular structures with increased characteristics and for the prediction of their properties.
The results of a study of the mechanical properties of the honeycomb material made of polyamide-12, which consists of structural elements that repeat in three directions and have Schwartz primitive geometry, are presented. Samples in the form of a cube (size 30 × 30 × 30 mm) are obtained by layer-by-layer sintering of powder material on a 3D printer of selective laser sintering (SLS) type. Compression tests of samples with various geometry show that the strength of the samples increases with a decrease in the characteristic size of the repeating structural element. According to the calculations performed by the finite element method, this is caused by an increase in the dangerous sectional area. The possibility of a significant increase in the specific strength of the material while maintaining its density is shown.
The study of isotropy of mechanical properties of cellular structures was carried out. The studied objects are based on triply periodic minimal surfaces (“Schwarz primitive”) with various cell size parameter t. The mechanical loading was applied with different loading directions. It was shown, that triply periodic minimal surface (TPMS)-based materials have high isotropy of mechanical properties.
Polyamide-12 products based on the Schwarz primitive topology with different values of parameter t are created by 3D printing. The samples are obtained by selective laser sintering using an EOS 3D printer. The experimental stress–strain curves are obtained. It is revealed that as parameter t increases the strength of the samples decreases. Computer simulation using the COMSOL Multiphysics software is performed.