In this paper, we consider the potential of data-transmission in a system with a massive number of radiating and sensing elements, thought of as a contiguous surface of electromagnetically active material. We refer to this as a Large Intelligent Surface (LIS). The "LIS" is a newly proposed concept, which conceptually goes beyond contemporary massive MIMO technology, and arises from our vision of a future where man-made structures are electronically active with integrated electronics and wireless communication making the entire environment "intelligent". Firstly, we consider capacities of single-antenna autonomous terminals communicating to the LIS where the entire surface is used as a receiving antenna-array in a perfect line-of-sight (LOS) propagation environment. Under the condition that the surface-area is sufficiently large, the received signal after a matched-filtering (MF) operation can be closely approximated by a sinc-function-like intersymbol interference (ISI) channel. Secondly, we analyze a normalized capacity measured per unit-surface, for a fixed transmit power per volume-unit with different terminal-deployments. As terminal-density increases, the limit of the normalized capacity [nats/s/Hz/volume-unit] achieved when wavelength $\lambda$ approaches zero is equal to half of the transmit power per volume-unit divided by noise spatial power spectral density (PSD). Thirdly, we show that the number of independent signal dimensions that can be harvested per meter deployed surface is $2/\lambda$ for one-dimensional terminal-deployment, and $\pi/\lambda^{2}$ per square meter for two and three dimensional terminal-deployments. Lastly, we consider implementations of the LIS in the form of a grid of conventional antenna-elements, and show that the sampling lattice that minimizes the surface-area and simultaneously obtains one independent signal dimension for every spent antenna is the hexagonal lattice.
23 January 2018 in IEEE Transactions on Signal Processing
We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS), which is a newly proposed concept beyond massive multi-input multi-output (MIMO). In a first step, we derive Fisherinformation matrix (FIM) and Cramέr-Rao lower bound (CRLB) in closed form for positioning a terminal located perpendicular to the center of the LIS, whose location we refer to as being on the central perpendicular line (CPL) of the LIS. For a terminal that is not on the CPL, closed-form expressions of the CRLB seem out of reach, and we alternatively find approximations that are shown to be accurate. Under mild conditions, we show that the CRLB for all three Cartesian dimensions (x, y, and z) decreases quadratically in the surface area of the LIS. In a second step, we analyze the CRLB for positioning when there is an unknown phase φ presented in the analog circuits of the LIS. We then show that the CRLBs are dramatically degraded for all three dimensions and decrease in the third order of the surface area. Moreover, with an infinitely large LIS, the CRLB for the z-dimension with an unknown φ is 6 dB higher than the case without phase uncertainty, and the CRLB for estimating φ converges to a constant that is independent of the wavelength λ. At last, we extensively discuss the impact of centralized and distributed deployments of LIS, and show that a distributed deployment of LIS can enlarge the coverage and improve the overall positioning performance.
8 June 2023 in IEEE Transactions on Wireless Communications
In this paper, we propose a novel three-dimensional (3D) near-field beamforming (BF) design for Large Intelligent Surface (LIS). We firstly investigate the definitions of near-field and far-field of LIS, and derive the Fresnel near-field region where amplitudes variations are negligible but only phase variations worsen the harvested array-gains. We show that the Fresnel region which covers the majority part of near-field, can be enlarged by a factor of four when considering possible imperfectness from a conventional two-dimensional (2D) far-field BF. Therefore, it is of interest to design an analog 3D-BF that can recover array-gain losses in this region. Secondly, with a decomposition theorem we show that the optimal 3D-BF can be decomposed into a 2D far-field BF and a one-dimensional (1D) near-field BF. The 2D far-field BF compensates phase variations from mismatches in the azimuth and elevation angles, while the 1D near-field BF compensates remaining phases variations caused by distance differences from a user-equipment (UE) to different antenna-elements on LIS. Such a proposed “2D+1D” BF design reduces codebook-size significantly and is compatible with the existing far-field BF in the fifth-generation new-radio (5G-NR) system. Thirdly, we analyze an optimal codebook design for the 1D near-field BF, and show that with a small codebook it can perform close to optimal. Numerical results verify that the proposal is effective to recover array-gains in the near-field of LIS.
19 December 2016 in IEEE Transactions on Signal Processing
In this paper, we propose a soft-output detector for multiple-input multiple-output (MIMO) channels that utilize achievable information rate (AIR) based partial marginalization (PM). The proposed AIR based PM (AIR-PM) detector has superior performance compared to previously proposed PM designs and other soft-output detectors such as K-best, while at the same time yielding lower computational complexity, a detection latency that is independent of the number of transmit layers, and straightforward inclusion of soft-input information. Using a tree representation of the MIMO signal, the key property of the AIR-PM is that the connections among all child layers are broken. Therefore, least-square estimates used for marginalization are obtained independently and in parallel, which have better quality than the zero-forcing decision feedback estimates used in previous PM designs. Such a property of the AIR-PM detector is designed via a mismatched detection model that maximizes the AIR. Furthermore, we show that the chain rule holds for the AIR calculation, which facilitates an information theoretic characterization of the AIR-PM detector.
5 September 2023 in IEEE Transactions on Wireless Communications
It is known that probabilistic constellation shaping (PCS) can provide a shaping-gain of 1.53dB asymptotically as signal-to-noise (SNR) increases. This is however, under ideal assumptions that the system operates in optimal sense and can achieve the Shannon capacity. In practice, the system can operate well below the capacity. In this paper, we propose a PCS-transceiver for the fifth-generation new-radio (5G-NR) evolution that supports quadrature-amplitude-modulation (QAM) constellations shaped with PCS, namely, PCS-QAM, in comparison to conventional uniform QAM constellations, namely, Uniform-QAM. We put a special interest in the throughput achieved under a stringent block-error rate (BLER) constraint, and validate the effectiveness of PCS under practical detection and decoding algorithms. We also analyze the properties of power-gain, entropy-loss, and peak-to-average power-ratio (PAPR), in connections to PCS. As a lower BLER does not necessarily indicate a higher throughput due to entropy-loss from PCS, we further prove that a necessary and sufficient condition for PCS-QAM to outperform Uniform-QAM in throughput is that the normalized entropy-loss with PCS-QAM is less than the BLER obtained with Uniform-QAM. Furthermore, we demonstrate that the PCS-transceiver is flexible in rate-adaptation without impacting the encoder, and can yield a better throughput-envelope in 5G-NR system.
22 March 2017 in IEEE Transactions on Wireless Communications
In this paper, we consider precoder designs for multiuser multiple-input-single-output (MISO) broadcasting channels. Instead of using a traditional linear zero-forcing (ZF) precoder, we propose a generalized ZF (GZF) precoder in conjunction with successive dirty-paper coding (DPC) for datatransmissions, namely, the GZF-DP precoder, where the suffix ‘DP’ stands for ‘dirty-paper’. The GZF-DP precoder is designed to generate a band-shaped and lower-triangular effective channel F such that only the entries along the main diagonal and the first lower-diagonals can take non-zero values. Utilizing the successive DPC, the known non-causal inter-user interferences from the other (up to) users are canceled through successive encoding. We analyze optimal GZF-DP precoder designs both for sum-rate and minimum user-rate maximizations. Utilizing Lagrange multipliers, the optimal precoders for both cases are solved in closed-forms in relation to optimal power allocations. For the sum-rate maximization, the optimal power allocation can be found through water-filling, but with modified waterlevels depending on the parameter . While for the minimum user-rate maximization that measures the quality of the service (QoS), the optimal power allocation is directly solved in closedform which also depends on . Moreover, we propose two lowcomplexity user-ordering algorithms for the GZF-DP precoder designs for both maximizations, respectively. We show through numerical results that, the proposed GZF-DP precoder with a small ( 3) renders significant rate increments compared to the previous precoder designs such as the linear ZF and usergrouping based DPC (UG-DP) precoders.