Fatigue cracking in an asphalt mixture is a process whereby microcracks in the asphalt–aggregate interface propagate into extensive interconnected cracks under repeated loads. The fatigue performance of asphalt is influenced by the load as well as the intrinsic nature of the asphalt–aggregate system. This study used the surface energy concept of asphalt and aggregate systems to characterize the fatigue behavior of asphalt mixtures. The surface energy of asphalt and aggregate at different temperatures were measured using Wilhelmy plate method and contact angle meter, respectively. By using dissipated pseudostrain energy of nonlinear viscoelastic material and micromechanics cracking model, the effect of surface energy on fatigue life of the asphalt mixtures was analyzed. Laboratory test indicated that the surface energy of the asphalt generally decreased with an increase of temperature. Compared with AH70 grade asphalt, the surface energy of styrene-butadiene-styrene block copolymer (SBS)-modified a...
18 April 2023 in Construction and Building Materials
Pavement adhesion plays a crucial role in driving safety, while traditional test methods exhibit some limitations. To improve the efficiency and accuracy of asphalt pavement texture characterization and adhesion assessments, this paper uses three-dimensional (3D) laser technology to detect the continuous point cloud data of road surface and reconstruct the 3D topography of pavement texture. On this basis, a volume parameter Volume of peak materials (Vmp) is innovatively proposed to comprehensively characterize the 3D spatial characteristics of road surface texture. The correlation analysis between the proposed Vmp and the traditional adhesion evaluation index Transversal Adhesion Coefficient (CAT) is conducted, and then refined graded adhesion prediction models based on the proposed Vmp are proposed. Results show that the proposed volume parameter Vmp can reliably and accurately characterize the asphalt pavement texture by considering more structural properties of the road surface texture. According to the research findings of this paper, it is feasible to achieve rapid and correct assessment of asphalt pavement adhesion using 3D laser detection technology by comprehensively considering the 3D characteristics of the road surface texture.
The cohesive and adhesive bond strength of the asphalt-aggregate system, sensitive to environment temperature, will impact asphalt pavement rutting resistance. This paper used the Whihelmy plate method to test the change process of surface free energy of AH70 asphalt and SBS modified asphalt in the range of 20 to 70 Centigrade. Surface free energy of aggregates was measured by contact angle meter. The results show that the surface energy decreased as temperature increased. When the temperature exceeds the asphalt binder softening point, the adhesion bonding of asphalt-aggregate will reduce. The adhesion between asphalt and limestone or basalt is higher than that between asphalt and diabase or sandstone. By analyzing the correlation of surface energy parameters and dynamic stability of the six type asphalt mixture, a linear correspondence between the surface energy at 60 centigrade and rutting resistance is derived. This research may provide a theoretical basis for the optimization of selecting asphalt and aggregate and rutting preventive maintenance.
10 May 2023 in International Journal of Pavement Engineering
Moisture accumulated in the pavement can further access the internal asphalt concrete (AC) through the diffusion effect, causing loss of adhesion and cohesion in AC. Previous studies have contributed significantly to formulating the diffusion process, among which the Fickian diffusion model is widely used. However, solving such a model challenges researchers due to its second-ordered partial differential equation form. To address this issue, we developed an alternative approach that integrated spatial discretization and nonlinear regression to solve the Fickian diffusion model based on realistic vapour sorption profiles. The results showed that exceeded 0.73, and the orders of diffusion coefficient lay between , which aligned well with existing studies. Furthermore, we used the solved Fickian diffusion model to predict moisture concentration and distribution in AC through the finite element (FE) method. The sum of squared errors (SSe) between simulation and measurement is lower than g/mm3. The simulation showed that ambient conditions and material properties influenced the moisture field evolution with diffusion time. The statistical analysis indicated that the interface was prone to accumulate moisture and generate damage. Our work provides a sequential method, including solving and applying the Fickian diffusion model, to predict moisture evolution in AC.
14 November 2022 in Journal of Testing and Evaluation
Steel deck asphalt pavement (SDAP) significantly differs from traditional pavement in terms of substructure and service environment, so its rutting development is unique. Indoor tests and the finite element method cannot competently simulate service environment and accurately show the rutting development of SDAP. In this study, the rutting development of SDAP was evaluated using full-scale accelerated pavement testing (APT). First, a steel bridge with two different pavement structures was constructed and a heating system was installed to keep the high temperature. Second, three indoor tests—dynamic stability (DS), hardness number (HN), and indentation—were conducted to quantify the rutting resistance of pavement materials, and the Mobile Load Simulator 66 executed the APT. The indoor results showed that DS and HN correlated well with the APT rut depth. With the increase of APT loading cycles, the rutting depth, the ratio of sag area to uplift area, and the ratio of sag area to full areas were increased. Meanwhile, the rutting depth changing speed and the ratio of uplift area to full areas declined with the loading. A rutting depth prediction model (RPM) was proposed based on the number of loading cycles and the initial rutting depth at 5,000 loading cycles. The RPM applied well to the previous study’s test data, indicating that rut development can be evaluated by its early status.