Helical milling with the advantages of stable machining process, a well-machined surface quality, etc., is an interest of researchers and producers. Machined surface roughness (arithmetic mean deviation (Ra) and maximum height of the assessed profile (Rz)) and milling power consumption as two main machining characteristic parameters were studied and chosen as response factors to evaluate the machinability of Scots pine helical milling. Input variables included helical angle of milling cutter, rotation speed of main shaft, and depth of milling. Response surface methodology was applied for the design of experiments, data processing and analysis, and optimization of the processing parameters. The results showed that Ra and Rz decreased with an increase in helical angle and rotation speed of main shaft, though increased with an increase in depth of milling. Milling power increased when the helical angle and depth of milling increased and showed a slight downward trend as the rotational speed increased. The quadratic models were applied to predict the values of Ra, Rz, and milling power due to the high values of R² of 0.9895, 0.9905, and 0.9885, respectively. The plot of predicted and actual values also indicated that the created models had good predictability. The optimized combination of helical angle, rotation speed, and depth of milling are 64°, 7500 r/min, and 0.5 mm, respectively. The effects of input variables and the quantitative relation between input variables and response variables were revealed clearly. These achievements will be useful for guiding the selection of helical milling parameters to achieve the purposes of improving processed surface quality and saving the processing power consumption.

Due to the flexible motion characteristics, helical milling could achieve high surface quality and cutting stability. The effects of input parameters on specific cutting energy (SCE) during the medium density fiberboard (MDF) helical up-milling process were studied. Results of analysis of variance showed that the helical angle and depth of milling had extremely significant effects on SCE. SCE increased with increased helical angle, but decreased with increased milling depth. The impact of the rotation speed of the main shaft was non-significant. Due to the highest R² value, a quadratic model was selected to establish the relationship between input parameters and SCE. The relative errors between predicting results and confirmatory test results were minimal, which meant that the model had high predicting accuracy. Under the selected input parameters, the optimized parameters were 54°, 5500 r/min, 1.5 mm for helical angle, the rotation speed of the main shaft, depth of milling, respectively. Although the arithmetic average of absolute roughness (Ra) and mean peak-to-valley height (Rz) increased about 58.3% and 46.2%, respectively, under the optimal milling parameters, the optimization was feasible at the initial rough machining stage. These results will be beneficial in guiding the selection of processing parameters to achieve reducing SCE.

The cutting power consumption of milling has direct influence on the economic benefits of manufacturing particle boards. The influence of the milling parameters on the cutting power were investigated in this study. Experiments and data analyses were conducted based on the response surface methodology. The results show that the input parameters had significant effects on the cutting power. The high rake angle reduced the cutting force. Thus, the cutting power decreased with the increase in the rake angle and the cutting energy consumption was also reduced. The cutting power increased with the rotation speed of the main shaft and the depth of milling induced the impact resistance between the milling tool and particle board and the material removal rate. The p-values of the created models and input parameters were less than 0.05, which meant they were significant for cutting power and power efficiency. The depth of milling was the most important factor, followed by the rotation speed of the main shaft and then the rake angle. Due to the high values of R² of 0.9926 and 0.9946, the quadratic models were chosen for creating the relationship between the input parameters and response parameters. The predicted values of cutting power and power efficiency were close to the actual values, which meant the models could perform good predictions. To minimize the cutting power and maximize the power efficiency for the particle board, the optimized parameters obtained via the response surface methodology were 2°, 6991.7 rpm, 1.36 mm for rake angle, rotation speed of the main shaft and depth of milling, respectively. The model further predicted that the optimized parameters combination would achieve cutting power and power efficiency values of 52.4 W and 11.9%, respectively, with the desirability of 0.732. In this study, the influence of the input parameters on the cutting power and power efficiency are revealed and the created models were useful for selecting the milling parameters for particle boards, to reduce the cutting power.