Mark Klein Breteler

Mr. Mark Klein Breteler


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
TDThaiënne Van Dijk
Thaiënne Van Dijk
MRMarc Roche
Marc Roche
XLXavier Lurton
Xavier Lurton
RFRidha Fezzani
Ridha Fezzani
SSSteve Simmons
Steve Simmons
DPDan R. Parsons
Dan R. Parsons
For health and impact studies of water systems, monitoring underwater environments is essential, for which multi-frequency single- and multibeam echosounders are commonly used state-of-the-art technologies. However, the current scarcity of sediment reference datasets of both bottom backscatter angular response and water column scattering hampers empirical data interpretation. Comprehensive reference data derived from measurements in a controlled environment should optimize the use of empirical backscatter data. To prepare for such innovative experiments, we conducted a feasibility experiment in the Delta Flume (Deltares, The Netherlands). Several configurations of sonar data were recorded of the flume floor and suspended sediment plumes. The results revealed that flume reverberation was sufficiently low and that the differential settling of fine-sand plumes in the water column was clearly detected. Following this successful feasibility test, future comprehensive experiments will feature multi-frequency multi-angle measurements on a variety of sediment types, additional scatterers and sediment plumes, resulting in reference datasets for an improved interpretation of underwater backscatter measurements for scientific observation and sustainable management.

30 October 2014 in Coastal Engineering Proceedings
Verified
Journal Article
Open access
PDF file
PSPaul van Steeg
Paul van Steeg
MBMark Klein Breteler
Mark Klein Breteler
ALAstrid Labrujere
Astrid Labrujere
Outer slopes of grass dikes under wave attack are likely to have residual strength, which is the strength after initial damage has occurred. This strength is not included in current design and assessment tools. To quantify the residual strength of grass under wave attack and implement this in design and assessment tools, a large research program is initiated within the Dutch WTI 2017 project. This project is financed by Rijkswaterstaat. In this research program an integrated approach, a combined use of a so-called wave impact generator and large-scale wave flume tests in the Delta Flume is applied. This approach contributes to a future strength model which includes residual strength of the outer slope of grass dikes under wave loads, primarily along large rivers. Grass cannot be scaled properly and many variations exist in grass covers (clay quality, grass quality, transitional structures, objects in or on the dike, et cetera). For this reason, testing with traditional physical wave flume models would lead to unacceptable high costs since many tests are required. Therefore, a wave impact generator is developed (Van Steeg et al, 2014). This machine can be placed easily on a prototype dike in the field and can generate wave impacts on a slope. During testing, the machine is continuously filled by a pump. By opening a pre-programmed valve irregularly, a mass of water is relieved leading to an impact that resembles impacts caused by natural waves. The developed wave impact generator is applied in an extensive measurement campaign on several grass dikes in the Netherlands. Variations of the thirteen different test sections were on grass and clay quality but also transition structures and objects (pole, open concrete blocks allowing grass growth, stairs). This leads to valuable erosion patterns as function of geometric properties of the outer slope of the dike. The hydraulic load during all tests was the same. Although wave run-up levels and wave impact pressures due to the wave impact generator are close to natural waves, there is a need to calibrate the results obtained with the wave impact generator. Therefore, large scale physical model tests in the Delta Flume, with a selection of the dikes tested with the wave impact generator, are performed. Blocks of 2 m x 2 m x 0.8 m were taken from dikes and were transported to the Delta Flume. In this flume (L x B x D = 235 m x 5 m x 7 m), waves can be generated up to a significant wave height of Hs = 1.6 m. Erosion patterns obtained with the wave impact generator and erosion patterns obtained in the large scale flume were compared. Based on this comparison and based on impact pressure analysis it is concluded that the wave impact generator represents a load which is equivalent to a significant wave height of Hs = 0.6 - 0.7 m, a wave steepness of sop 4-5%. The integrated use of the wave impact generator and a large-scale wave flume led to valuable data. This data will be used to improve the strength model for outer slopes of grass dikes under wave attack.

7 May 2024 in CoastLab 2024: Physical Modelling in Coastal Engineering and Science
Verified
Journal Article
Open access
PDF file
Alessandro AntoniniAlessandro Antonini
Alessandro Antonini
MBMark Klein Breteler
Mark Klein Breteler
PWPim Willemsen
Pim Willemsen
DDDimitris Dermentzoglou
Dimitris Dermentzoglou
JMJos Muller
Jos Muller
Ir. B.W. BorsjeIr. B.W. Borsje
Ir. B.W. Borsje
Hard coastal structures such as dikes covered with asphalt or placed block revetments have been widely used in the past for coastal protection in densely populated deltas around the world. Nonetheless, in recent years the effectiveness of hard structures has been questioned in light of the inevitable effects of climate change and their static nature. Decades of research on how salt marshes can play a role within a comprehensive coastal protection scheme suggest that these low environmental impact structures (Maza et al., 2015) might have the capability of dissipating wave energy and hence be technically and formally considered within hybrid coastal erosion and flood protection systems (Borsje et al., 2011). However, only very few studies investigated wave attenuation by real salt marsh vegetation in large-scale laboratories (Ghodoosipour et al., 2022; Maza et al., 2015; Möller et al., 2014) and none of them addressed extreme hydrodynamic design conditions in terms of wave energy and water levels. As a result of this knowledge gap, salt marshes in The Netherlands and all around the world have never been formally considered within the coastal flood protection systems and the underlying risk assessment. With this contribution our aim is to provide an overview of the first worldwide large-scale test focused on the interaction between a salt marsh (i.e. vegetation and shallow foreshore) and extreme hydrodynamic conditions, the adopted measurement techniques and the preliminary results in terms of wave damping, erosion and removed biomass.

29 May 2025 in Coastal Engineering Proceedings
Verified
Journal Article
Open access
PDF file
Alessandro AntoniniAlessandro Antonini
Alessandro Antonini
DDDimitrios Dermentzoglou
Dimitrios Dermentzoglou
JMJos Muller
Jos Muller
MTMarion Tissier
Marion Tissier
MBMark Klein Breteler
Mark Klein Breteler
Ir. B.W. BorsjeIr. B.W. Borsje
Ir. B.W. Borsje
In densely populated coastal regions across the globe, hard sea defenses have been widely used to guarantee the safety of the population and exposed assets. However, the efficacy of these hard structures has come under scrutiny in recent times due to the expected impacts of climate change and the claimed inappropriate behavior due to their static nature. In 1925, A.G. Verhoeven (Verhoeven, 1938) introduced the concept of man-made salt marshes for land reclamation purpose. He transplanted around 40,000 Spartina Townsendii plants from their native southern UK habitat to Zeeland, the coastal southernmost region of the Netherlands. In doing so, Verhoeven inadvertently played a pioneering role in the early development of the 'Building with Nature' concept. Since then, several decades of dedicated research showed the potential use of salt marshes as low environmental impact structures (Maza et al., 2015) as an opportunity to be quantitatively investigated, Willemsen et al., 2020, Vuik et al. 2019, Borsje et al., 2011; Gedan et al., 2010; Costanza et al., 1997; Chapman VJ., 1974. Nevertheless, a comprehensive understanding of wave attenuation by salt marsh and its survivability remains limited, with only a few experimental studies addressing this topic under mild hydrodynamic conditions (Ghodoosipour et al., 2022; Maza et al., 2015; Möller et al., 2014). As a result of this knowledge gap, salt marshes have been excluded from technical consideration within coastal flood protection systems and the underlying risk quantification, thereby allowing for speculative claims regarding their efficacy in mitigating coastal flooding, both in the Netherlands and internationally. This contribution aims to present the first worldwide large-scale test dedicated to quantitatively describe the response and survivability of a salt marsh under extreme hydrodynamic conditions while also providing a complete overview of the complex background activities required for such a unique experiment.

2 May 2024 in CoastLab 2024: Physical Modelling in Coastal Engineering and Science
Verified
Journal Article
Open access
PDF file
SZSuzanna Zwanenburg
Suzanna Zwanenburg
VBVera VAN Bergeijk
Vera VAN Bergeijk
BWBert DE Wolff
Bert DE Wolff
MBMark Klein Breteler
Mark Klein Breteler
Sea dikes in the Netherlands consist of sandy or clay core with a clay layer with grass. The lower outer slope is often covered with a hard revetment, such as asphalt or a placed block revetment, to protect the dike material against wave impact. Since the strength of the clay layer with a grass subject to severe wave impact is unknown, the hard revetment needs to be constructed on a large part of the outer slope to ensure that the flood defence meets the safety requirements. Therefore, a research programme was started to determine the strength of the clay layer with grass on the upper slope of a dike. As a first step, large scale physical model tests have been performed. In the second step the CFD model OpenFOAM has been used to extend the physical model results by computing the peak pressure of the hydraulic load on the clay for the tested geometries and additional geometries with varying parameters that may influence the erosion rate. With all results, it was possible to derive formulas for failure probability calculations in the final step. The knowledge development on the erosion of a clay layer with grass on the outer slope by wave attack resulted into formulas that are currently used in the safety assessment of dikes contributing towards safer deltas and resilient designs of dikes.