Perovskite light-emitting diodes (LEDs) are attracting great attention due to their efficient and narrow emission. Quasi-two-dimensional perovskites with Ruddlesden–Popper-type layered structures can enlarge exciton binding energy and confine charge carriers and are considered good candidate materials for efficient LEDs. However, these materials usually contain a mixture of phases and the phase impurity could cause low emission efficiency. In addition, converting three-dimensional into quasi-two-dimensional perovskite introduces more defects on the surface or at the grain boundaries due to the reduction of crystal sizes. Both factors limit the emission efficiency of LEDs. Here, firstly, through composition and phase engineering, optimal quasi-two-dimensional perovskites are selected. Secondly, surface passivation is carried out by coating organic small molecule trioctylphosphine oxide on the perovskite thin film surface. Accordingly, green LEDs based on quasi-two-dimensional perovskite reach a current efficiency of 62.4 cd A⁻¹ and external quantum efficiency of 14.36%.

The deep ultraviolet photodetectors based on 2D h-BN show a high on/off ratio of >10³ and good spectral selectivity.

CsPbBr₃/ZnO heterostructure photodetectors exhibit a high photoresponsivity because of the interfacial charge transfer from perovskite to ZnO.

Perovskite solar cells have made significant strides in recent years. However, there are still challenges in terms of photoelectric conversion efficiency and long-term stability associated with perovskite solar cells. The presence of defects in perovskite materials is one of the important influencing factors leading to subpar film quality. Adopting additives to passivate defects within perovskite materials is an effective approach. Therefore, we first discuss the types of defects that occur in perovskite materials and the mechanisms of their effect on performance. Then, several types of additives used in perovskite solar cells are discussed, including ionic compounds, organic molecules, polymers, etc. This review provides guidance for the future development of more sustainable and effective additives to improve the performance of solar cells.